Professional Documents
Culture Documents
SPIN
INSTRUCTION MANUAL
E-mail ute@pu.hinet.hr
APPLICATION:
BRIEF DESCRIPTION:
The switching supply sources feature high degree of efficiency and small
dimensions and weight.
The electronic current limit makes them insensitive to overloads and short -
circuits at output terminals.
The SPIN rectifiers are available in several types, depending on output voltage and
current (power), and in two basic versions:
Several rectifiers of SPIN type (of same output voltage) can be parallel connected to
increase the output power / current rating.
TECHNICAL DATA:
Output voltage :
Mechanical protection I P 21
CONNECTION:
The rectifiers are supplied with minimum 1.5 meter long connection cables.
The input cable is a five-core color marked leads cable:
Connection of supply cables:
L3 black L3 black
L2 black L2 black
3x380V L1 brown L1 brown
Neutral blue do not connect blue
grounding yellow-green grounding yellow-green
The output cable is two-wire, red lead is + pole and black is – pole.
NOTE:
If 12 V rectifier is used for storage battery charging it is necessary to connect in
output cable a fast fuse for the rectifier rated current . This fuse is not a protection
against overload or short-circuit since the rectifier is already protected with electronic
current limit but it is necessary for protection against possible poles reversing
which would otherwise result in rectifier damage.
The rectifiers with output voltage of 24 V are already equipped with this fuse.
Therefore, there is no need for its external mounting.
MOUNTING:
The rectifiers are foreseen for wall mounting. It is necessary to enable a natural
circulation of air i. e. around the rectifier a space of about 10 cm should be free.
If the rectifier is to be built in a closed cabinet the temperature inside the
cabinet should not exceed 50 °C and it would also be good to have, in this case, a fan
for an intensive air circulation inside the cabinet.
180
140
max. 120 200
Dimension drawing
SPIN-300-**-LX
180
140
max. 120 200
Dimension drawing
SPIN-300-**-N
180
85
70
Dimension drawing
SPIN-150-**-N
300
300
09
V A
370
400 b1
h1
A203
345
250
Dimension drawing
SPIN-300-**-N/K
Electric connection
SPIN-300-**-N/K