Professional Documents
Culture Documents
a. Taking Backup
For taking backup automatically, all LAG nodes must be discovered in LAGEMS. Always add nodes
through Manage Nodes option. Right Click on Map and Manage nodes.
After discovery of nodes, Select EMS & Backup Restore option in EMS.
In this, lagdata.tar and Automatic/Manual will be seen. This means lagdata.tar which are created
automatically will be seen in the list of backup files having Automatic. If backup is taken manually using
then Manual will be seen.
If operator runs this command through Thin Client PC then after taking backup, EMS will ask the path in
Thin Client PC and operator may select path in which operator wish to save backup.
In LAGEMS server *_A and *_M will be seen which means A for Automatically and M for Manually.
EMS: /home/admin/AdventNet/WebNMS/Backup/Lag
NGTJ: /mmc/etc/BACKUP
b. Restoring Backup
Note: For restoring Backup through EMS, give soft shutdown to standby copy first then restore
backup to NGTJ card. For this, login into card and give following commands
# cd /mmc/etc
#. /lag_shutdown.sh 2
After discovery of nodes, Select EMS & Backup Restore option in EMS.
Select Restore from Thin Client and select files operator wish to restore and restore.
# cd /mmc/etc
# ./lag_restore.sh
Untar & copy required files at required path and make System UP.