Professional Documents
Culture Documents
GT-100 Errata PDF
GT-100 Errata PDF
MEMO
p. 16
(ADD) An effect can also be selected by stepping on the pedal that has
Step 2
been set in Manual mode (p. 17).
p. 16
Step 2
Use knob [3] to move the position of the effect to left or right. You can use knob [3] to turn the effect on/off.
You can use knob [1] to turn the effect on/off. Use knob [1] to move the position of the effect to left or right.
p. 18
When operating from the stopped state (STOP), if you depress the [PHRASE LOOP] pedal one time, you’ll return to loop playback (PLAY); you won’t go into
“Advanced:
overdubbing (DUB).
Phrase Loop”
p. 24
“Tuning the Parameter Value Explanation Parameter Value Explanation
Guitar (TUNER)“ [1] PITCH 439 Hz–449 Hz Specifies the reference pitch. [1] PITCH 435 Hz–445 Hz Specifies the reference pitch.
Step 3 (table)
Con-
Parameter Value Explanation Con-
troller Parameter Value Explanation
troller
p. 28 Channels “A” and “B” will be
MONO Channels “A” and “B” will be
mixed and output in monaural. STEREO
“Mixer settings” mixed and output in stereo.
Step 3 (table) [5] MODE Channels “A” and “B” will be [5] MODE Channels “A” and “B” will be
assigned respectively to the
L/R L/R PAN assigned respectively to the L
L and R OUTPUT jacks, and
and R OUTPUT jacks.
output in stereo.
p. 31
“Storing
Settings by
Turn knob [6] to select the write destination. Turn knob [6] to select the write destination (U01 – U10).
Effect (Quick
Setting Write)”
Step 4
p. 47
”Setting the
* If the MAP SELECT (p. 46) setting is “FIX,” the Program Change Map settings * If the MAP SELECT (p. 45) setting is “FIX,” the Program Change Map settings
Program
will be ignored. will be ignored.
Change Map”
Step 5
ページ 誤 正
メモ
P.16
(追加) マニュアル・モード(P.17)で設定したペダルを踏むことで
手順 2
もエフェクトを選ぶことができます。
P.16
手順 2
[3]つまみでエフェクトの位置を左右に移動。 [3]つまみでエフェクトをオン/オフ。
[1]つまみでエフェクトをオン/オフ。 [1]つまみでエフェクトの位置を左右に移動。
P.18
「応用編:フレー 停止「STOP」の状態から[PHRASE LOOP]ペダルを 1 回踏むと、オーバーダビング「DUB」ではなくループ再生「PLAY」に戻ります。
ズ・ループ」
P.24
「ギターを
チューニング パラメーター 設定値 説明 パラメーター 設定値 説明
する(チュー [1] PITCH 430Hz 〜 449Hz 基準ピッチを設定します。 [1] PITCH 435Hz 〜 445Hz 基準ピッチを設定します。
ナー)」手順 3
(表)
P.31
「エフェクト単
位で設定を記憶
させる(クイッ [6]つまみを回して保存先を選びます。 [6]つまみを回して保存先(U01 〜 U10)を選びます。
ク・セッティン
グ・ライト)」
手順 4
パラメーター 設定値 解説
P.32
録音→再生→オーバーダビン
「フレーズ・ルー REC → PLAY
グの順に切り替わります。 (削除)
プの設定をす [8] REC ACTION
る」手順 3(表) 録音→オーバーダビング→再
REC → DUB
生の順に切り替わります。
P.47「プログ
ラム・チェンジ・ ※ MAP SELECT(P.46)の設定を「FIX」に設定すると、プログラム・チェ ※ MAP SELECT(P.45)の設定を「FIX」に設定すると、プログラム・チェ
マップを設定す ンジ・マップの設定は無効になります。 ンジ・マップの設定は無効になります。
る」手順 5