(Approved by A.I.C.T.E., New Delhi& Affiliated to JNTUK, Kakinada)
NAAC Accredited Institute An ISO 9001:2008, 14001:2004 & OHSAS 18001:2007 Certified Institute NH–5, Anakapalle, Visakhapatnam–531002, Andhra Pradesh DEPRTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING COURSE DELIVERY PLAN Subject : Digital Signal Processing Class : III B.Tech ECE B-II Sem Faculty Name : Dr J BABU Designation : Professor Department : ECE Academic Year: 2019-2020
III B.Tech ECE B
S.No CO Question Marks Unit 1 1 1 Explain about different types of Discrete time signals 10 2 2 Summarize the different types of Discrete time systems 10 3 3 A Discrete time LTI system is described by the difference equation 10 y(n)+0.8y(n-1)=x(n).Determine the output when the input is unit step. The initial condition is y(-1)=0. Use Direct Method 4 4 A Discrete time LTI system is described by the difference equation 10 y(n)-0.5y(n-1)=x(n).Determine the output when the input is x(n)=5nu(n). The initial condition is y(-1)=2. Use Z-Transform Method Unit 2 10 1 1 Determine the Fourier series representation of the Discrete time 10 signal x(n)=cos(3πn/4) 2 2 State and prove any three Properties of DFT. 10 3 3 Explain about decimation in time FFT Algorithm 10 4 4 Explain about decimation in frequency FFT Algorithm 10 Unit 3 10 1 1 Explain about the Bilinear Transformation method of filter design. 10 2 2 Design a Digital LPF using the Bilinear Transformation method to 10 satisfy the following characteristics (a) Monotonic Pass band and Stop Band (b) -3.01 dB cut off frequency of 0.5π rad (c) Magnitude down at least 15 dB at 0.75π rad 3 3 Design an analog Butterworth Filter that has a -2 dB or better cut 10 off frequency of 20 rad/sec and at least 10 dB of attenuation at 30 rad/sec. 4 4 A Discrete time system is represented by the transfer function 10 8 z 3−4 z 2+ 11 z−2 H ( z) = 1 1 . ( z − )( z2 −z+ ) 4 2 S.No CO Question Marks Unit 4 1 1 Explain about the different windows used for FIR Digital Filters Design 2 2 Discuss about the FIR Digital Filters Design Methodology using windows Technique. 3 3 Describe the FIR Digital Filters Design Methodology using Frequency sampling Technique. 4 4 Design a Linear phase FIR Filter using rectangular window by taking 7 samples of window sequences and with a cut off frequency ωc=0.2π rad/sample. Unit 5 1 1 For the Discrete Time signal x(n)={1,2,3,4} determine (a) down sampled version of the signal for sampling rate reduction factor 2 2 D=2 Explain the meaning of Sampling rate conversion. Describe the Implementation of sampling rate conversion in IIR Filters. 3 3 Summarize the implementation of Digital Filter Banks 4 4 Elaborate the Sub-band Coding of Speech Signals Unit 6 1 1 Explain about Von-Neumann, Harvard, Modified Harvard, VLIW Architecture Models of Digital signal Processors in brief. 2 2 Explain about the Memory access schemes, Multiple Access Memory, Multiported memory of Programmable Digital signal Processors. 3 3 Explain about the Bus Structure, Central Arithmetic Logic Unit, Parallel Logic Unit, Program controller of TMS320C5X Digital signal Processor 4 4 Explain about the Auxiliary Register ALU, Index Register, Block Move Address Register, Memory mapped registers, status registers of TMS320C5X Digital signal Processor in brief.
Professor Emeritus K. S. Spiegler Auth. Principles of Energetics Based On Applications de La Thermodynamique Du Non Équilibre by P. Chartier M. Gross and K. S. Spiegler Springer Verlag Berlin Hei1
Beethoven and The Metronome, I Author(s) : Peter Stadlen Source: Music & Letters, Vol. 48, No. 4 (Oct., 1967), Pp. 330-349 Published By: Oxford University Press Accessed: 12-08-2016 05:22 UTC