Professional Documents
Culture Documents
Simulation Results For Electric Current Lab PDF
Simulation Results For Electric Current Lab PDF
PLEASE READ!!!
• I’ve tabulated the results for generated from the simulation in the table below. I’ve also done
the graph. Your graph should look similar to the one displayed below.
• All calculations should be shown. Find Power using the equation P = I*V. The current values
from the simulation were given in mA. However, for ease of calculations, I converted the values
to Amperes. You should do the same.
• The values that you get for power should be recorded in the table. Then the power values will
be plotted against voltage. That is, power (y-axis) vs Voltage (x-axis).
• For the discussion, just state what is observed from the graph. That is, if power and voltage have
a directly or indirectly proportional relationship with each other. Explain what it means and
prove your theory using values from the graph.
• PLEASE SHOW ALL CALCULATIONS
• If in doubt ask questions.
Power
Cell number current(mA) voltage (V) (Watt)
1 0.03571 1.43 0.0510653
2 0.06818 2.73 0.1861314
3 0.09783 3.91 0.3825153
4 0.125 5 0.625
Table of results
0.6
0.5
power (Watt)
0.4
0.3
0.2
0.1
0
0 1 2 3 4 5 6
Voltage (V)