Customer: _______________ PO#: _____________ Line Item #:___________ Quantity: ____________
Fax this form with your purchase order to our Customer Service Department: USA: Fax: 760-597-4830 - Phone: 760-599-4800 Spain: Fax: 34 94 615 61 14 Phone: 34 94 674 03 12 Please note that all options will increase the vessel price - NOTE: Missing order information will delay your order
LOCKING TYPE (Choose one): PRO (Retaining Ring w/ finger pull) BPV (locking segments, 1000/1200 PSI only) CODE: MODEL PRO/BPV 8-A-( SP - MSP )-B (Choose SP or MSP based on maximum desired side port size) A (Pressure) 300 450 600 1000 1200 B (Length) -1 -1.5 -2 -3 -4 -5 -6 -7 -7.5 -8 Notes: B (Length) : 40" Membrane: -1, -2, -3, -4, -5, -6, -7, -8 60" Membrane: -1.5, -3, -6, -7.5 FEED/CONCENTRATE PORT CONFIGURATIONS: (see drawing for details) SP: Standard - P1 port to port span Option - P2 port to port span Option - P3 port to port span MSP: Standard - P3 port to port span Option - P1 port to port span (for 300 and 450 PSI ONLY) Fill out the feed/concentrate port requirements in the space below. List the port location first, followed by the port size code for each port. Serial Number end Opposite end Port location (see diagram) Port Size Code Port Size Code: SP MSP D = 1-1/2" IPS Grooved end P = 1-1/2" IPS Grooved end ¹ E = 2" IPS Grooved end H = 2" IPS Grooved end NOTE: 3" and 4" ports are not F = 2-1/2" IPS Grooved end J = 2-1/2" IPS Grooved end allowed 90° from U = 1-1/2" Sanitary K = 3"¹ IPS Grooved end another port S = 2" Sanitary L = 4"¹ IPS Grooved end Z = 1-1/2" Sanitary EXTERIOR FINISH: Y = 2" Sanitary Standard - White high gloss polyurethane coating over a smooth surface Option - Other color available for orders over 50 vessels. Call for pricing details CERTIFICATION: Standard - Certified by Protec Arisawa America, not code stamped Option - ASME Code Section X, RP stamped certified by an ASME Authorized Inspector. Call for pricing details Option - ASME Code Section X, RP stamped per above and registered with the National Board. Call for pricing details Option - Other __________________________________________________________________________ SEAL PLATE: Noryl (standard) PET 316L Stainless Steel PERMEATE PORT: (* Noryl is NOT available) Feed End - Check one Material - Check one Concentrate (Opposite) End - Check one Material - Check one 1-1/4" NPT male threads (standard) Noryl (standard) 1-1/4" NPT male threads (standard) Noryl (standard) 1-1/2" NPT male threads PVC 1-1/2" NPT male threads PVC 1-1/2" IPS Grooved end PET 1-1/2" IPS Grooved end PET 1-1/4" IPS Grooved end * SST 1-1/4" IPS Grooved end * SST 1" NPT female threads 1" NPT female threads 1/2" NPT female threads * 1/2" NPT female threads * 1/4" NPT female threads 1/4" NPT female threads 1-1/2" Type 3A sanitary connection * 1-1/2" Type 3A sanitary connection * RC1" (1" PT or 1" BSP) female threads * RC1" (1" PT or 1" BSP) female threads * R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads * R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads * 1/4" Sampling valve (Standard Noryl Port + PVC Valve) 1/4" Sampling valve (Standard Noryl Port + PVC Valve) Blind permeate port Blind permeate port Autoshim (Brackish) * Others Others MEMBRANE INFORMATION: Brand: __________________ Model: _____________________ This information is required to process the order ADAPTER: (* Noryl is NOT available) Feed End - Check one Thru Solid * Material - Check one Noryl PVC PET SST Concentrate End - Check one Thru Solid * Material - Check one Noryl PVC PET SST THRUST CONE: Material - Check one PVC (standard) Noryl CUSTOM VESSEL OPTIONS: Check here for no lube on any parts Check here for High temperature continuous operation up to 176 F, max 185 F for 30 minutes at 25 PSI. No PVC parts. For Ultrapure operation, choose SST, PET, or Noryl Parts only, and 316L SST Permeate ports with type 3A sanitary connections. For Sanitary operation, choose SST, PET, or Noryl Parts only, 316L SST Permeate and feed/concentrate ports with type 3A sanitary connections. Other special requirements (instruction): _________________________________________________________________________ ____________________________________________________________________________________________________________ Vessel configuration approved by __________________ Date __________________
10/24/2014 FO-036_G Vessel Order Form SP-MSP 8in_10 24 2014