Professional Documents
Culture Documents
AE2300 Series User ManualV1.35
AE2300 Series User ManualV1.35
User Manual
Version 1.35
Preface
Thanks for purchasing the AE2300 series Optical Time Domain Reflectometer (OTDR). This manual contains useful
information about AE2300 series OTDR’s functions and operating procedures as well as its handling precautions. To
ensure proper use, please read this guide thoroughly before starting the operations.
We make every effort to ensure the accuracy of the contents in this guide. However, should you have any questions or
find any errors, please contact your nearest DEVISER representative. The contents of this operation guide are subject to
change without prior notice as a result of our continuing improvements to the instrument’s performance and functions.
Copying or reproducing all or any part of the contents of this manual without DEVISER’s permission is strictly
prohibited.
1
Description of Symbols
Important operation information to follow to make the use of this instrument more efficiently
To alert users of conditions that could cause damage to the instrument or loss of important data.
IEC825-1(EN60825-1:1994) Ⅲ b standard
2
Table of Content
Preface 1 Setup 10
Preparations 7 Real-time 15
AC Adapter 7 Zoom&Move 16
Battery 8 Store&Load 17
3
Component Function
Front Panel
Protector
On/off Button
TAB
Backspace Real-Time
4
Component Function
Interface Panel
AC adapter
VFL
650nm
5
Component Function
Display
Status Bar
Setup Key
Trace
Soft keyboard
Markers
Information
Events
6
Preparations
AC adapter
Adapter Port
7
Battery
5. Tighten the screws Caution: Please recharge the battery every 3 months.
Power ON
Please charge the battery when the low power alarm.
Battery capacity Charging
indication LED Indicator
Full
1/2 Red:Charging
1/4 Green:Full
Low
8
Connect Fiber
Before using the OTDR to measure, the operator should ensure that the type of fiber
connector is consistent with the instrument’s optical connector and please prepare cleaning
tools to clean the fiber interface.
Otherwise, it will affect measurement accuracy and potentially cause serious damage to the
equipment.
To ensure the instrument functioning properly and obtain the best test result, you should
always clean the fiber end with ethanol (ethyl alcohol or pure alcohol) before connecting to
the laser interface. Wait until the alcohol is volatilized before connecting the fiber to the
instrument.
When the fiber is disconnected from OTDR, cover the laser interface with its cap immediately
to avoid dust or dirt getting into the laser interface.
Do not look directly into any live fiber or direct laser light. Wear appropriate protective
eyewear. Otherwise, it can cause blindness or damage to the eye.
9
Setup
AUTO
You can use the ‘AUTO’ KEY or the Setup Menu to select the AUTO mode.
10
Manual
Manual test mode need to set up the parameters according to the actual situation.
1. Press ‘Setup’
11
Start
1. Press button or touch on the screen both will start the test.
2. It will undertake connection state detecting first. If the connection state is bad, please clean or
replace the connector. Good
General
Bad
3. The progress bar will appear after the connection state detecting, touch STOP button on the screen
will stop test.
12
Analyzing the Results
Results Cursor Left
Cursor Right
Cursor Left+Right
Zoom Auto
Zoom In Free
1:1
Trace+Table
1310nm or 1550nm
Edit Event
Events Table
Touch the event in the table, the corresponding event will highlight on the trace.
13
Cursors test Distance/Loss/Slope
Touch target location on the trace, the currently selected cursor will move to there.
Distance
Loss/Slope information
15
Zoom&Move
1:1 Zoom auto
Before After
16
Store&Load
How to save?
Return
17
Store&Load
19
Customer Service and Support
General Information
DEVISER Inc warrants this instrument against defects for 3 years from the date of shipment.
Exclusions
Accessories, including but not limited to the built-in optical interface adapter, is not covered in the warranty.
It will only carry 3 months warranty. The battery will only carry 1-year warranty.
The warranty does not cover failure resulting from improper use or installation, nor does it cover normal
wear and tear, accident, abuse, and negligence.
Liability
Company shall not be liable for damages resulting from improper use of this instrument, accessories, and
software.
Company shall not be liable for damages resulting from modification of this instrument and its accessories
by unauthorized personnel or the warranty label has been removed.
Company shall not be liable for damages resulting from external forces, such as mechanical forces, soaking,
extreme heat or cold, and fire.
Company shall not be liable for damages resulting from the use of this instrument, nor shall be responsible
for damages or failure of other equipment to which this instrument is connected.
20
Customer Service and Support
After testing, if the returned equipment is found to be working properly and meet all the applicable
standards, all related costs will be charged to the user.
21
Deviser (US) Deviser (China)
Address: 780 Montague Expressway, Address: No.8, Haitai Chuangxin 3rd Road,
E-mail: overseasbiz@deviser.com.cn
22