Professional Documents
Culture Documents
L18P300
unit, with 15 mm thick plates and specially designed suspensions ensure an excellent
control of amplitude of over +/- 12 millimetres. The special cooling system with forced air
ventilation offer a great heat dissipation and the minimum levels of power compression
available on the market.
Professional Low Frequency Transducer Voice coil construction, suspensions and cone materials are upgraded in order to
withstand up to a Kilowatt RMS power.
PART NUMBER 11185016
35 1000
100
Rear Mount Baffle Cut-out 418/16.5 mm/inch
(ohms)
100
Depth 187/7.36 mm/inch
Impedance
10
10
SHIPPING INFORMATION
20 100 1.000 10.000 20.000
Net Weight 14/31.1 Kg/Lbs
20 100 1.000 10.000 20.000
Frequency (Hz) Shipping Weight 14.8/32.9 Kg/Lbs
Impedence magnitude curve measured in freeFrequency
air (Hz)
NOTES TO SPECIFICATIONS
1 Program Power is defined as 3 dB greater than AES power. - 2 AES standard. - 3 Sensitivity measurement is based on a 500-2,5 kHz pink noise signal with input power of 2.83V @ 8 Ohms. - 4 Thiele-Small parameters are
measured after a 2 hour warm up period running the loudspeaker at full power handling capacity. - 5 The maximum linear excursion is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg the gap depth. - 6
Calculated for front mounting on 18 mm thick board.
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice.
65