Professional Documents
Culture Documents
Education : B.Tech. in Electrical & Electronics Engineering from Vinayaka Mission University,
Tamilnadu -2009,
: Diploma in Electrical & Electronics Engineering from Sree Narayana Guru Institute of
Technology, Tamilnadu -2002,
: PDC in Thermal Power Plant Engineering from NPTI National Power Training
institute ,Nagpur, Maharashtra -2003,
Nationality : Indian
● BTG Commissioning, Operation & Maintenance experience: Power Plant – Hands on experience
in commissioning, Operation 2X 660MW, Boiler, Turbine, Generator Make: DEC-Don fang Electric
Machinery Co. Ltd.,2 Nos of Oil fired boiler (HFO 380 CST, LFO), Front and Rear fired, SH, RH
(reheat) Type. Capacity 2220t/hr, Pr: 16.7 Mpa, Temp:5350c, Steam Turbine Three cylinder, Combined
HP & IP turbine and 2 no’s LP turbine, Condensing type with LP bypass & HP bypass system.
Including ATC and EHTC governing system, Turbine driven feed pump, FGD, Generator with Static
excitation system, Hydrogen Cooling system.
● peration,Maintanence of Coal fired High Pressure
Have hands on experience in commissioning, O
Boilers Make BHEL (India), CVL(India) ,IGSEC(India),Type of Boilers FBC,HRSG,PF.
● Familiar DCS related activities (Yokogawa (centum CS 3000 & VP) ABB (AC 800M) and Invensys
Foxboro ,Emerson.
● Supervising the complex Loop checking, Function test, DCS operation, BMS ,Commissioning & Start
up activities.
● During the logic, sequence and function check of ESD & F&G system, checking the ESD valves on
line test, graphic display, graphic alarm manager, sequence of events, service description, trend
historian, DCS assigned key board, bad input/output, transmitter fail safe burnout and related
configured data.
● Coordinating all the activities to the DCS Vendor Which Sub-System need priority action.
● Assist the Vendor for Pre-comm. & Commissioning Activities.
● Supervising Pre-commissioning Activities like Air Blowing, Reinstatement, Leak Test, Preservation, ,
Mechanical Run test for all Pumps, compressors Turbines.
● Good knowledge of commissioning sub-system, BOP system, FGD system.
● Also providing Safety Procedure like work permit for the safe of manpower during operation.
● Involve in Ready for commissioning (RFC) walk through with Clint identifying Punch items and closing.
● Coordinate with the Site Manager for request of Material for Construction work at site.
● Preparation of work activities and scheduling of manpower assignment.
● Organize Daily toolbox meeting with Subordinates and labors before starting the day’s work.
● Also provide safety procedure like work permit for the safe of manpower during operation.
● Attended pre-commissioning meeting, installation, inspection, maintenance, test repair and selection of
the materials equipment and facilities, using the standards which can comply with latest addition.
● Handling of manpower and equipment in proper and execute on the spot solution by using common
sense when trouble shooting and decision making.
● Review Construction Planning, Scheduling & Execution exactly on time as required by the Company.
● Make sure that sub-contractor should rectify the punches as soon as possible to hand over the sub
system vise to the owner as per mile stone completion date
Period Project
Mar 2010 – Jul 2011 ● Employer: Fujairah Cement Industries, Dibba, UAE
●
Jul 2009 to Jun 2009 ● Employer: RAK AL Ghali Power LLC, UAE
● Project: RAPP- 3 & 4 and KAPP-1 &2 Atomic Power Plant of Nuclear
Power Corporation of India Limited at Rajasthan & Karnataka.
● Key Roles / Activities Performed:
Asish Saha
06-02-2020