You are on page 1of 6

Used yard TR 30S-3L

Product number C524-3K


Weave 2/2 Twill
Carbon thickness 0.30 ± 0.05
Tensile modulus 230
Construction Warp 15.0 ± 0.5 Carbon 3K
(Thread count/inch) Weft 15.0 ± 0.5 Carbon 3K
Carbon Fabrication Weight (g/m )
2
240± 7.2
Width (mm) 1,500

Area Wieght (g/m2) 400 ± 10


Moisture 1% Max
Loss of Ignition 0,5 ± 0,2
Type of glass C-glass
Warp 4,0 ± 0,4
Density (Ends/cm)
Weft 4,0 ± 0,4
Breaking Strength Warp 2000 ± 100
(N) Weft 2000 ± 100

Oil Content (%) 0,5 - 2,0


Properties Unit Value
Viscosity at 25 ˚C mPa.s 13,000 ± 2,000
Epoxy Number % 22,7 ± 0,6
Epoxy Equivalent g/equiv 189 ± 5
Epoxy Value equiv/100 g 0,53 ± 0,01
Total chlorine content % < 0,2
Hydrolyzable chlorine content % 0,05
Colour According to the gardner scale <1
Density at 25 ˚C g/cm3 1.17 ± 0,01
refractive index at 25 ˚C 1,572 ± 0,003
Volatile content at 3 h, 140 ˚C % < 0,2
Vapour Pressure at 80 ˚C mbar < 0,1
Flashpoint according to DIN 51584 ˚C > 250

Properties Units Value


Bentuk fisik - Cair
Viskositas pada temperatur 25 ˚C Poise 0,5 - 1,0
Active Hydrogen Equivalent Weight g/equiv 86
Nilai Amina mgKOH/g 290 - 260
Warna Gardner 2 max
Densitas g/cm3 1,010
Properties Value
Density (g/cm3) 1.2-1.3
tensile strength (Mpa) 55-130
Tensile modulus (Gpa) 2.75-3.45
Resistensi polymer terhadap distorsi dibawah pembebanan pada 48
temperatur atau Heat Distortion temperature (˚C)
penyusutan atau cure shrinkage (%) 1-5
peralihan temperatur resin atau Glass transition temp (˚C) 100-270
Aerospace
Comersial, Standard
Property Standard intermediate
Modulus
modulus modulus
Tensile modulus, Gpa 228 220-241 290 - 297
tensile strength, Mpa 380 350-4830 3450 - 4830
Elongation at break, % 1.6 1.5-2.2 1.5 - 2.2
Electrical resistivity, μΩ· cm 1650 1650 1650
thermal conductivity, W/m . K 20 20 20
Coefficient or thermal expansion,
-0.4 -0.4 -0.4
axial direction, 10-6 K
Density, g/cm3 1.8 1.8 1.8
Carbon content, % 95 95 95
Filament diameter, μm 6-8 6-8 5-6
BPAmoco, Hexcel, Mitsubishi Rayon, Toho,
Manufacturers Zoltek, Fortafil, SGL
Toray, Tenax, Soficar, Formosa
erospace

high modulus

345 - 448
3450 - 5520
0.7 - 1.0
900
50 - 80

-0.75

1.9
+99
5-8
Mitsubishi Rayon, Toho,
x, Soficar, Formosa
Properties Value
Physical properties
Specific grafity 2.49
Mohs hardness 6.5

Mechanical properties
Tensile strength at 22 ˚C, Mpa 3033
Tensile modulus of elasticity at 22 ˚C, Gpa 69
Yield elongation, % 4.8
Elastic recovery, % 100

Thermal properties
Coefficient of thermal linier expansion, ˚C-1 7.2
Specific heat at 22 ˚C 0.212
Softening point, ˚C 749

Electrical properties
Dielectric constant at 22 ˚C at 106 HZ 7.0

You might also like