Professional Documents
Culture Documents
BASF is a leading supplier of solid resins, water-based With our Joncryl® product line, we offer a broad range of
polymers and energy-curable resins under the trade names high-value, high-performance water-based polymers for the
® ®
Joncryl and Laromer . printing inks and overprint varnish market. The Laromer®
Our goal at BASF is to design products that help the product line offers high-performance binding agents
industry comply with European legislation while resulting in emission-free energy curing of printing inks and
maintaining a high level of product performance. overprint varnishes. The properties and performance of
these product lines contribute to the quality and value of
the printing and packaging industry.
Customer focus Responsible Care®1
As the world’s leading chemical company, BASF opens up Responsible Care®1 is an initiative by the global chemical
potential for success together with its partners. BASF helps industry aimed at achieving continuous improvements in
customers achieve more success by providing consultative performance in the fields of environment, health and safety.
customer guidance with the selection and application of BASF signed the Responsible Care Global Charter in early
® ®
its Joncryl and Laromer ranges. BASF works intensively 2006, committing itself to expanding its worldwide activities
with customers to develop new products and to improve in these fields.
existing ones. Our industry-recognized team of applications
experts is eager to assist customers in meeting formulation
and related challenges. Much energy goes into marketing
activities and market research of buyers and end users, to
stay on top of changes in demand.
02 03
Solid styrene/
acrylic resins
Non-volatile Molecular
Product Appearance Key properties
[%] weight (Mw)
Styrene/acrylic Joncryl®
clear solid resin alkali resistance, excellent water and wet block resistance, good resolubility 97.0 4,500
resins 586
wide choice of compatible solvents, for maximum formulation flexibility, high resistance
Joncryl®
clear solid resin properties, economic due to low isocyanate demand, provides good pot-life plus capability 98.0 17,000
587
for fast tack free time
high color strength development, excellent flow at high pigment loadings, compatible with
Joncryl®
clear solid resin many other solvent soluble resin systems, soluble in ethers, ether alcohol mix, ketones and 99.0 8,150
611
aromatic hydrocarbons
Joncryl®
clear solid resin good color strength development, excellent transfer and printability, good gloss and hold-out 99.0 8,500
678
Joncryl® high solids varnishes at low viscosity, high gloss, broad compatibility, excellent transfer and
clear solid resin 99.0 4,500
680 printability, good resolubility
Joncryl®
clear solid resin high gloss, high solids/low viscosity solutions, excellent resolubility 99.0 1,750
682
Joncryl® good viscosity stability, good pigment wetting and color development, good gloss and
clear solid resin 99.0 16,500
690 transparency
Joncryl® glycol ether free, ultra low VOC, good color strength development, excellent transfer and
clear solid resin 99.5 5,800
ECO 675 printability, good gloss and hold-out
Joncryl® glycol ether free, ultra low VOC, good viscosity stability, good pigment wetting and color
clear solid resin 99.5 13,750
ECO 694 development, good gloss and transparency
Joncryl® good viscosity stability, good pigment wetting and color development, good gloss and
clear solid resin 99.5 17,000
HPD 671 transparency
Joncryl® ECO is an ultra low VOC and glycol ether-free product range
meeting the stringent demands of packaging applications, such as
the tobacco and confectionary markets, which cannot tolerate product
contamination as a result of retained volatile organic components in
the packaging.
Acid value Tg Ready-made
Description and applications
(on solids) [° C] solutions
110 66 - styrene-acrylic resin for use in alkali resistant water-based inks and overprint varnishes
<4 50 - hydroxyl functional acrylic flake for use in solvent-based crosslinked systems
Joncryl® 61,
216 101 styrene-acrylic resin for use in water-based inks and overprint varnishes
8078, 8083
Joncryl® 8085,
238 57 low molecular weight acrylic resin for use in high solids water-based overprint varnishes
Joncryl® 8087
Joncryl® 8082,
240 105 styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
8088, 8089
222 95 - glycol ether free styrene-acrylic resin for use in water-based inks and overprint varnishes
200 101 - glycol ether free styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
Joncryl® HPD
214 120 styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
71E, HPD 71MEA
04 05
Water-based styrene/
acrylic resin solutions
Non-volatile pH
Product Appearance Key properties
[%] (25 °C)
Joncryl® good color strength development, excellent transfer and printability, good gloss
clear solution 32.0 8.3
8078 and hold-out
Joncryl® good viscosity stability, good pigment wetting and color development, good gloss
clear solution 29.0 8.6
8082 and transparency
Joncryl® good color strength development, excellent transfer and printability, good gloss
clear solution 30.0 8.3
8083 and hold-out
Joncryl® compliant for food contact applications/packaging, excellent transfer and printability,
clear solution 34.2 8.5
DFC 3025 good gloss and hold-out, good water resistance, very low VOC
Joncryl®
clear solution good viscosity stability, good pigment wetting and color development, good compatibility 25.0 8.5
HPD 71-E
Joncryl®
clear solution good viscosity stability, good pigment wetting and color development, good compatibility 25.5 8.4
HPD 71 MEA
Joncryl® DFC is a complete product range of food-contact-compliant Joncryl® HPD is a special range of “High Performance Dispersion”
(FDA and all European legislations) polymers for use on paper resins and resin solutions designed to produce high-quality aqueous
and paperboard and film substrates where “Direct Food Contact” is pigment dispersions with superior pigment wetting characteristics,
necessary. exceptional viscosity stability and free-flowing concentrates at high
pigment load.
Viscosity Molecular Acid value Tg
Description and applications
(mPa·s, 25°C) weight (Mw) (on solids) [° C]
3,900 8,500 233 101 ready made ammonia solution of Joncryl® 678 for use in water-based inks and overprint varnishes
1,750 8,500 222 101 ready made ammonia solution of Joncryl® 678 for use in water-based inks and overprint varnishes
1,350 16,500 249 105 ready made ammonia solution of Joncryl® 690 for pigment dispersions to be used in water-based inks
950 8,500 224 101 ready made MEA solution of Joncryl® 678 for use in water-based inks and overprint varnishes
1,350 1,750 245 57 ready made ammonia solution of Joncryl® 682 for use in high solids water-based overprint varnishes
medium molecular weight styrene-acrylic resin resolution for use in food contact overprint varnishes, inks
3,500 5,800 220 95
and pigment concentrates
200 17,000 221 120 ready made ammonia solution of Joncryl® HPD 671 for pigment dispersions to be used in water-based inks
1,000 17,000 220 120 ready made MEA solution of Joncryl® HPD 671 for pigment dispersions to be used in water-based inks
06 07
Water-based styrene/
acrylic resin solutions
Non-volatile pH
Product Appearance Key properties
[%] (25 °C)
Styrene/acrylic Joncryl® high concentrated dispersions, pigment savings, excellent rheology and transfer,
clear solution 26.8 8.4
resin solutions HPD 96 DMEA excellent color development, gloss and transparency, improved shock stability
Joncryl® high concentrated dispersions, pigment savings, excellent rheology and transfer,
clear solution 31.0 8.5
HPD 96-E excellent color development, gloss and transparency, improved shock stability
Joncryl® high concentrated dispersions, pigment savings, excellent rheology and transfer,
clear solution 31.5 8.5
HPD 96-E MEA excellent color development, gloss and transparency, improved shock stability
Joncryl® enables high pigmented low viscosity dispersions, improves storage and shock
clear solution 35.5 8.1
HPD 296 stability, reduces mill time, excellent color development, gloss and transparency
Joncryl® enables high pigmented low viscosity dispersions, improves storage and shock
clear solution 40.0 8.5
HPD 296 KOH stability, reduces mill time, excellent color development, gloss and transparency
Joncryl® enables high pigmented low viscosity dispersions, improves storage and shock
clear solution 37.5 9.5
HPD 296 MEA stability, reduces mill time, excellent color development, gloss and transparency
Joncryl®
clear solution low maintenance, pH-neutral, good gloss and clarity, excellent resolubility 30.0 7.0
LMV 7025
DMEA based high performance dispersion resin solution for high concentrated pigment dispersions to be used
400 16,500 242 105
in water-based inks
ammonia based high performance dispersion resin solution for high concentrated pigment dispersions to be used
2,000 16,500 233 105
in water-based inks
MEA based high performance dispersion resin solution for high concentrated pigment dispersions to be used in
2,000 16,500 195 105
water-based inks
ammonia based high performance dispersion resin solution for highly pigmented dispersions to be used in
500 11,500 141 15
water-based inks
KOH based high performance dispersion resin solution for highly pigmented dispersions to be used in
300 11,500 141 -
water-based inks
MEA based high performance dispersion resin solution for highly pigmented dispersions to be used in
700 11,500 141 -
water-based inks
2,000 12,500 235 97 low maintenance vehicle, pH-neutral styrene-acrylic resin solution to be used in water-based inks
low maintenance vehicle, pH-neutral styrene-acrylic resin solution for optimized pigment dispersions to be used
2,000 13,000 230 77
in water-based inks
08 09
Water-based film-
forming RC emulsions
Non-volatile pH Viscosity
Product Appearance Key properties
[%] (25 °C) (mPa·s, 25°C)
Film-forming Joncryl® semi-translucent good water and grease resistance, excellent gloss and transparency,
48.0 8.1 600
RC emulsions 74 emulsion good adhesion
Joncryl® semi-translucent good resolubility, excellent printability, excellent gloss and transparency,
46.0 8.1 550
77 emulsion good block resistance
Joncryl® translucent excellent bleeding resistance (EN646), good printability and resolubility,
39.5 8.6 < 50
535 emulsion good washability, low ammonia odor, food contact approval
Joncryl® semi-translucent excellent heat resistance, good wet rub resistance, excellent adhesion
36.5 9.3 300
1665 emulsion on foil and HDPE, LDPE, OPP film substrates
Joncryl® semi-translucent
excellent heat resistance, good gloss and clarity 43.5 9.5 350
1685 emulsion
Joncryl® semi-translucent excellent grease resistance, excellent film clarity, excellent resolubility,
42.0 7.9 550
8050 emulsion good adhesion to non-absorbing substrates
Joncryl® semi-translucent
good adhesion, good water resistance, good printability 46.5 7.9 750
8052 emulsion
Joncryl® semi-translucent
good film-forming properties, economical, good gloss and transparency 45.5 8.3 1,250
617 emulsion
Joncryl® excellent hot mar resistance, good rub resistance, good gloss and
opaque emulsion 32.3 8.5 400
660 tranparency
Joncryl® semi-translucent excellent stability in gold inks, long term brightness, excellent rub
42.0 7.9 200
2136 emulsion resistance, excellent printability
Joncryl® semi-translucent excellent dry and wet block resistance, high coefficient of friction, glycol
44.0 8.5 700
2178 emulsion ether free, excellent resolubility, good printability
Joncryl® semi-translucent excellent adhesion on HDPE, LDPE and OPP film substrates, good film
46.0 7.9 400
2647 emulsion wetting, fast drying, good wet rub and wet crinckle resistance
Molecular Acid value Tg Min. film-forming
Description and applications
weight (Mw) (on solids) [° C] temp. [° C]
> 200,000 69 -8 -3 acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 62 35 12 acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 - 20 <0 ammonia free acrylic emulsion for use in water-based tissue inks providing excellent bleeding resistance
> 200,000 63 - 42 <5 acrylic emulsion for use in heat and water resistant water-based inks and overprint varnishes
> 200,000 - - 20 <- 5 acrylic emulsion for use in heat resistant water-based inks and overprint varnishes
> 200,000 114 - 18 <- 5 acrylic emulsion for use in water-based grease resistant inks and overprint varnishes
> 200,000 65 - 35 <5 acrylic emulsion for water-based inks on paper, film and foil substrates
> 200,000 63 7 <0 styrene-acrylic emulsion for use in water-based overprint varnishes
> 200,000 215 27 26 acrylic emulsion for use in water-based pre-print overprint varnishes
> 200,000 78 - 25 <- 5 acrylic emulsion for use in water-based metallic inks
> 200,000 68 42 <0 styrene-acrylic emulsion for use in block resistant water-based inks and overprint varnishes
> 200,000 63 - 35 <5 acrylic emulsion for water-based inks used on film substrates
10 11
Water-based film-
forming RC emulsions
Non-volatile pH Viscosity
Product Appearance Key properties
[%] (25 °C) (mPa·s, 25°C)
Film-forming Joncryl® semi-translucent excellent adhesion and leveling on film substrates, excellent gloss,
44.5 7.7 450
RC emulsions 2651 emulsion excellent transfer, good water resistance, good resolubility
Joncryl® semi-translucent compliant for food contact applications/packaging, good printability, good
44.5 8.3 700
DFC 3040-E emulsion resolubility, good viscosity stability, good gloss and clarity, very low VOC
Joncryl® semi-translucent ultra low VOC, glycol ether free, excellent resolubility, excellent printability,
46.0 8.2 700
ECO 2177 emulsion excellent viscosity stability
Joncryl® semi-translucent ultra low VOC, glycol ether free, excellent resolubility, excellent printability,
46.0 8.2 1,250
ECO 2117 emulsion excellent viscosity stability, good compatibility
Joncryl® semi-translucent ultra low VOC, glycol ether free, excellent resolubility, excellent printability,
47.0 7.9 1,150
ECO 2124 emulsion excellent viscosity stability, good compatibility
Joncryl® semi-translucent good dry and wet rub resistance, excellent resolubility and printability,
42.0 8.5 1,000
FLX 5000 emulsion excellent heat-seal resistance, excellent blocking resistance
Joncryl® translucent low maintenance, pH-neutral, excellent resolubility, good water resistance,
47.5 7.7 1,500
LMV 7031 emulsion good adhesion to film and foil substrates
Joncryl® translucent
low maintenance, pH-neutral, excellent resolubility 45.0 7.0 600
LMV 7040 emulsion
> 200,000 85 - 30 <0 acrylic emulsion for water-based inks on paper, film and foil substrates
acrylic co-polymer emulsion for use in water-based heat-seal lacquers for cardboard blisters and flexible
> 200,000 60 - 10 -
packaging
> 200,000 65 22 26 film-forming styrene-acrylic emulsion for use in food contact water-based inks and overprint varnishes
> 200,000 65 - 27 <0 soft acrylic emulsion for use in food contact water-based inks and overprint varnishes
> 200,000 64 21 11 glycol ether free acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 62 8 <5 glycol ether free styrene-acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 65 - 35 <5 glycol ether free acrylic emulsion for use in water-based inks for film substrates
self-crosslinking acrylic emulsion with excellent resolubility for water-based inks used for surface printing on
> 200,000 90 - <5
film substrates
self-crosslinking acrylic emulsion with good resolubility for water-based inks used for surface printing on film
> 200,000 < 10 - 13
substrates as well as reverse printing and subsequent adhesion lamination
self-crosslinking acrylic emulsion with excellent resolubility for water-based inks used for surface printing on
> 200,000 26 - 13
film substrates
self-crosslinking acrylic emulsion with excellent resolubility for water-based white inks used for reverse
> 200,000 26 - 8
printing on film substrates and subsequent adhesion lamination
low maintenance vehicle, pH-neutral, film-forming acrylic emulsion for use in water-based inks for film
> 200,000 57 -9 -1
substrates
low maintenance vehicle, pH-neutral, hard film-forming styrene-acrylic emulsion for use in water-based inks
> 200,000 115 28 -
for paper, film and foil substrates
12 13
Water-based non-film-
forming RC emulsions
Non-volatile pH Viscosity
Product Appearance Key properties
[%] (25 °C) (mPa·s, 25°C)
Joncryl® increases color brightness, good resolubility and printability, fast drying,
opaque emulsion 49.5 7.8 2,500
631 low curling
Joncryl® semi-translucent good resolubility, low odor, good viscosity stability, fast drying, high
30.0 8.6 200
1158 emulsion color brightness
Joncryl®
white emulsion low gloss, no matting agent required 43.5 7.6 300
1680-E
Joncryl® semi-translucent
excellent clarity, excellent gloss, fast drying, good film-forming properties 43.5 8.0 150
8064 emulsion
Joncryl® semi-translucent
excellent optical clarity, high gloss, good heat resistance, fast drying 42.0 8.1 250
8067 emulsion
Joncryl® semi-translucent
excellent gloss, excellent clarity, cost effective 44 8.1 200
8068 emulsion
Joncryl® semi-translucent exceptional low odor, excellent resolubility, good heat resistance, high
46.0 7.9 400
8055 emulsion gloss, fast drying
Joncryl® semi-translucent compliant for food contact applications/packaging, good printability, good
45.0 8.2 300
DFC 3050-E emulsion resolubility, good block resistance, good gloss and clarity, ultra low VOC
Joncryl® semi-translucent glycol ether free, ultra low VOC, fast drying, high gloss, excellent
48.0 8.2 550
ECO 2189 emulsion versatility and robustness
Joncryl® semi-translucent
low maintenance, pH-neutral, high gloss, excellent resolubility 44.5 7.5 400
LMV 7051 emulsion
Molecular Acid value Tg Min. film-forming
Description and applications
weight (Mw) (on solids) [° C] temp. [° C]
> 200,000 76 110 > 85 styrene-acrylic emulsion for use in water-based overprint varnishes and inks
> 200,000 52 50 43 acrylic emulsion for use in alkali or detergent resistant water-based inks and overprint varnishes
> 200,000 70 64 60 acrylic emulsion for use in water-based inks for vinyl wallpaper and flooring
> 200,000 31 107 > 85 high hiding styrene-acrylic emulsion for use in water-based inks
- - 103 - low odor acrylic emulsion for use in water-based flexo inks for news print
> 200,000 - 107 > 85 high hiding low odor styrene-acrylic emulsion for use in water-based flexo inks
> 200,000 28 56 49 styrene-acrylic emulsion for use in low gloss/matt overprint varnishes
> 200,000 76 > 85 > 85 acrylic emulsion for use in detergent resistant water-based wallpaper inks for vinyl and paper substrates
> 200,000 150 110 84 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 158 97 58 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 78 110 > 90 styrene-acrylic emulsion for use in water-based overprint varnishes
> 200,000 152 - 81 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 36 105 > 85 high solids extremely fast drying styrene-acrylic emulsion for water-based inks on paper and paperboard
> 200,000 - 110 > 85 low odor acrylic emulsion for use in water-based inks and overprint varnishes
hard non-film-forming styrene-acrylic emulsion for use in food contact water-based inks and overprint
> 200,000 65 99 > 85
varnishes
> 200,000 65 98 > 85 glycol ether free styrene-acrylic emulsion for use in water-based inks and overprint varnishes
low maintenance vehicle, pH-neutral, hard, non-film-forming styrene-acrylic emulsion for use in
> 200,000 115 98 56
water-based inks for paper and paperboard
14 15
Water-based
acrylic colloids
Non-volatile pH Viscosity
Product Appearance Key properties
[%] (25 °C) (mPa·s, 25°C)
Acrylic Joncryl® excellent transfer and printability, excellent ink viscosity stability,
opaque emulsion 40.0 6.1 25
colloids 142-E broad compatibility, good rub resistance, flat dilution profile
Joncryl® white opaque good transfer and printability, excellent ink viscosity stability,
40.0 6.1 70
637 emulsion broad compatibility, flat dilution profile, low cost in use
Joncryl® semi-translucent good transfer and printability, excellent hot mar resistance,
44.0 2.1 60
661 emulsion low cost in use
Joncryl® semi-translucent excellent hot mar resistance, excellent transfer and printability,
33.5 1.7 240
8003 emulsion flat dilution profile, excellent ink viscosity stability
40,000 126 28 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
65,000 130 10 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
65,000 125 10 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
85,000 154 70 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
57,000 164 123 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
16,000 160 90 acrylic colloidal emulsion for use in high-quality inks for pre-print and post-print corrugated board and paper applications
40,000 250 87 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
60,000 103 21 ready made acrylic colloidal solution for use in post-print corrugated inks and kraft paper applications
16 17
Water-based
additives
Non-volatile pH Viscosity
Product Appearance Key properties
[%] (25 °C) (mPa·s, 25°C)
Zinc Oxide carboxyl group crosslinking agent, improved heat resistance, improved
clear solution 25.0 11.4 5
Solution #1 film hardness
Average particle Melting point
Description and applications
size (microns) of wax [° C]
- - crosslinking agent, effective with all acrylic polymers, having carboxyl functionality
18 19
Energy-curable
products
Viscosity Chemical
Product Functionality Reactivity Hardness Elasticity
[Pa·s, 23 °C] resistance
Laromer® PE 56 F 20 - 40 3.1
®
Laromer PE 44 F 2-5 3.0
* mPa·s, 23 °C
Surface Europe USA Canada Japan China Korea
Characteristics
tension EINECS TSCA DSL ENCS IECSC ECL
20 21
Energy-curable
products
Laromer® PE 56 F
Laromer® PE 44 F
Laromer® LR 8869
Laromer® LR 8996
Laromer® PO 43 F
Laromer® PO 33 F
Laromer® LR 8863
Laromer® LR 8986
Laromer® LR 8987
Laromer® DPGDA
Laromer® HDDA
Laromer® TMPTA
Laromer® POEA -
Laromer® TBCH -
Laromer® LR 8887 -
Overprint varnish
excellent
very good
good
- not suitable
22 23
Contact worldwide
The data contained in this publication are based on our current knowledge and
experience. In view of the many factors that may affect processing and application
of our product, these data do not relieve processors from carrying out their own
investigations and tests; neither do these data imply any guarantee of certain
properties, nor the suitability of the product for a specific purpose. Any descriptions,
drawings, photographs, data, proportions, weights, etc. given herein may change
without prior information and do not constitute the agreed contractual quality of the
product. The agreed contractual quality of the product results exclusively from the
statements made in the product specification. It is the responsibility of the recipient of
our product to ensure that any proprietary rights and existing laws and legislation are
observed. When handling these products, advice and information given in the safety
data sheet must be complied with. Further, protective and workplace hygiene measures
adequate for handling chemicals must be observed.
® = registered trademark of the BASF Group
®1 = Responsible Care is a service mark of the American Chemistry Council
EDC 0410 e
BASF SE
67056 Ludwigshafen
www.basf.com/resins Germany