Professional Documents
Culture Documents
Vibraciones de Piso PDF
Vibraciones de Piso PDF
3 4
5 6
1
Girder panel mode Continuity effect
2
Bg = Cg ( D j / Dg ) Lg ≤ floor width
1/ 4
• • For beam joist or girder are continuous over their span
3 and the adjacent span is greater than 0.7 of the
where Bg = effective length for the joist or beam current span, can be increased by 50% to account
Cg = 1.6 for girder support joist connecting to for the continuity effect. No continuity effect is
girder flange. added if the girder is connected to the column.
= 1.8 for girder support joist connecting to
girder web.
Dg = Ig/Lj transformed moment of inertia for
girder per unit width.
= 2Ig/Lj for edge girder
Dj = transformed moment of inertia for the T-
beam per unit width (12”)
Lg = girder span length
7 8
11 12
2
Design for rhythmic excitation Design for rhythmic excitation
• Minimum natural frequency • Acceleration limits
k α wp
f n ≥ f n ,required = f 1 +
a0 / g wt
• Natural frequency
g
f n = 0.18
∆
where ∆ = ∆ j + ∆ g + ∆c
13 14
15 16
• The criteria are expressed in terms of greatest velocity where Fm is located in Table 6.2
instead of greatest acceleration is because the
criterion for a given class of equipment ∆ P is deflection of the floor
corresponding to a constant value of velocity over
most of the frequency range of interest. • Maximum displacement
X max = Am X static
17 18
3
Design for sensitive equipment Design for sensitive equipment
• Maximum velocity • If fn/f0 >> 0.5
2/3
where U v is located from Table 6.2 ∆ P 2 ⎛ V2 ⎞
=⎜ ⎟
∆ P1 ⎝ V1 ⎠
19 20
21 22