Professional Documents
Culture Documents
FC 3 MSDS
FC 3 MSDS
FC-3
Revision Number 4a, Revision Date 14.01.26
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product Code
Product Name FC-3
2. COMPOSITION/INFORMATION ON INGREDIENTS
3. HAZARDS IDENTIFICATION
Emergency Overview:
♦ Corrosive
♦ Based upon available toxicity information for this and closely related materials, it is
anticipated that this material causes severe irritation and possible burns
Page 1 of 6
FC 3
♦ Skin
♦ Inhalation
5. FIRE-FIGHTING MEASURES
combustion products or
released gases
Special Protective Equipment ♦ As in any fire, wear NIOSH approved self-contained
for fire-fighters breathing apparatus and full protective gear
Specific Methods ♦ Cool containers / Tanks with water spray
♦ Fire residues and contaminated fire extinguishing water
must be disposed of in accordance with local
regulations
Personal Precautions ♦ Do not inhale mist, do not get in eyes or skin, do not swallow
♦ Use personal protective equipment
Environmental ♦ Discharge in accordance with Government Regulations
Precautions
Methods for cleaning ♦ Small spills: Neutralize with mild alkaline solution then wash
up down with large quantities of water in sanitary sewer
♦ Large spills: Dike to prevent runoff. Reclaim as much as
possible. Absorb remainder with inert material (sand or
vermiculite) and place in compatible container for disposal.
Neutralize residue with soda ash or lime with adequate
ventilation and flush with large amounts of water into sanitary
sewer.
♦ Cleaning up personnel should wear appropriate protective
equipment
Page 3 of 6
FC 3
Page 4 of 6
FC 3
Waste from residues/Unused Do not discharge into lakes, streams, ponds or public
products waterways unless in accordance with Government
Regulations. Consult your local, state or federal
Environmental Protection Agency before disposing of any
chemicals. Refer to the Environmental Management Authority
Page 5 of 6
FC 3
N/A
N/A
Page 6 of 6