Professional Documents
Culture Documents
1/24
1/36
CONTENT
• Ducted Split ( R410A )
• Cassette Type (R22)
• Floor standing A/C (R22)
• Package Unit ( R410A)
• Air Handling Unit
2/36
Light Commercial On-Off Type T3
• 1、Duct Type Introduction
Mall , etc.
Flexible Indoor type are suitable
for all kinds of room size.
3/36
Outdoor Unit Appearance
18k 24k
48k/60k
36k
4/36
Indoor Unit Appearance
5/36
Wide Operating Range
6/36
Duct Type Introduction
7/36
High Efficiency
8/36
Design, installation convenience
High different height & long piping design, make installation more convenient
9/36
Slim Design
Advantage Hotel Room
Card Control
Galvanized steel
Fire Control
appearance
Drain pan
Absorb plastic foam I Feel
Structure Control
Dual Core
Built in Drain pan PCB Board
Cooling
System Intelligent
Water level Switch Defrost
10/36
Slim Design
190mm
11/36
Galvanized Steel Appearance
Advantages:
1, High strength, no deformation, durable
2, Fire prevention
12/36
Drain Pan Absorb Plastic Foam
Advantages:
Never rust,
Excellent insulating performance
13/36
Built-in Drain Pan
Hisense built-in drain pan design: will avoid the dirty and
leakage efficiently
14/36
Optional Static Pressure
18k: optional 10Pa & 30Pa static pressure,One unit, Two installation method
10Pa: No duct,straight blow
30Pa: External duct placed on air discharge
Front Blow, bottom air intake Front Blow, back air intake
16/36
Optional Static Pressure
17/36
Centrifugal fan
New Hisense new centrifugal fan, will provide higher static pressure overcome
wind resistance.
Low noise centrifugal fan design, will offer high static pressure, and
cross fan, zero static pressure, blowing distance is short.
Low noise centrifugal fan design will avoid heating issue because
hot air is difficult to reach the ground, give you more comfortable.
18/36
Special Control & Protection Function Instruction
1、 Hotel room card control Signal lines
(Red & Black)
Connect
Hotel room
card control
20/36
2、 Fire control
Signal lines
(White & Black)
Smoke sensor
Connect
21/36
4、Dual Core PCB Board
23/36
5、Intelligent Defrost
Frost
24/36
6、ODU Quiet Operation
25/36
7、3 Fan speed of ODU
Main control program will choose the most suitable ODU fan speed by detecting indoor and
outdoor temperature:
Cooling Mode: If the outdoor temperature is too low, refrigerant may not evaporate
completely and liquid refrigerant may entre the compressor and caused damage of compressor.
Hisense product will reduce the outdoor fan speed to reduce the heat transfer capacity to
avoid liquid strike at this situation.
Heating Mode: If the outdoor temperature is too high, the system will operate at high
pressure and compressor life will be shortened by long term running.. Hisense product will
reduced outdoor fan speed to reduce the heat transfer capacity, and make the system pressure
to get lower.
26/36
8、Safety Protection
27/36
The other Features
1、Auto Restart
After power resuing, the unit will remember the original running
status (such as set mode, temperature setting, fan speed, louver
position)and restart automatically, to meet the needs of users.
28/36
2、Temperature Protection Functions
29/36
Cassette Type Introduction
30/36
Fashion Design
31/36
Low Noise Fan
New design of the vortex fan
18k 24k/36k/48k/60k
All modes use the vortex fan and optimized air tunnel,
low noise and smooth air flow.
32/36
PE foaming clad steel integration design
The Cassette type adopts “PE foaming clad steel integration design” ,
combined the high strength of steel and heat preservation & sound insulation
performance of the PE foam, make full use of foam’s toughness and steel’s
rigidity, improve the gel performance.
33/36
Temperature compensation of Cassette
For Cassette type heating mode, people always are not warm enough because
the hot air stay at the top level. Hisense Cassette bring 4 level temperature
compensation setting by DIP switch. The unit will increase the fan speed and air
circulation to create a comfortable environment for people.
34/36
Free Standing Introduction
35/36
Product Appearance
Hisense Integral panel design makes fashion style appearance and allow
CMF(Color\Material\Finishing) design extension and family appearance very well.
36/36
Product Feature
Purifying
37/36
Product Feature
indoor 1 1 1 1 1
Control Board
outdoor 0 1 1 1 1
indoor 3 3 4 4 4
Fan Speed
outdoor 1 3 3 3 3
For 24K/36K/48K/60K product ,we use two control board and outside three fan speed plan.
Advantage:
1、3 sensors in outdoor unit for accurate control(esp. defrosting and discharge protection).
2、3 speed fan motor for adjusting system pressure in the harsh environment.
3、HP switch and LP switch for keeping the system and compressor reliable.
4、Easy achievement the phase sequence protection and phase current protection.
5、With the communication between indoor and outdoor unit , any protection and error
could be detected in indoor unit.
38/36
Product Reliability
Outdoor unit High Reliability
Control Board
(Phase order protection) Accumulator
Ambient
Temperature
HP switch
Sensor
LP switch
Coil
Temperature
Sensor
Discharge
Temperature
Scroll comp.
Sensor
39/36
Product Appearance
Outdoor unit
60K
48K
36K
24K
18K
40/36
RTU ( Roof Top Packaged Units)
41/36
Air Handling Units
42/36
VRF System Introduction
43/36
44/36
45/36
46/36
47
47/36