AWS CWI Practical BOS: 2017
ANNEX VIIl
Annex Vill (Informative)
Procedure Qualification Record (PQR)
‘WELDING PROCESS & Ty TOINTS:
Process: | [a] Weld Type: | [31]
Process2: [2] Groove Type: [32]
Root Spacing: (33)
BASE METALS Metal Backing: (34)
Base Material Spec | [3] wt) Thermal Backgouging: | [35]
MNo: [5] GroupNo: | | toMNo. ‘Group No.
Piteor Pipe: [6] Pipe Diameter: (7)
Thickness: [8]
coating: | 19]
Be
FILLER METALS
Speciation No. (20),
‘AWS No. Classification: fay]
Fo: (32)
Weld Metal Analysis Ao. 3) Sketch of oint
Filler Metal Sze: faa) POSTWELO HEAT TREATMENT
‘Supplemental Filer: a5) PWHTType: | 7]
‘Weld Metal Depost Thickness: tas) PWHT Temperature: | [38]
PWHTTime: [39]
POSITION
Postion of Joint: (17) “cas
Vertical Welding Progression; | [8] Shielding Gasi (a0)
Compostion: | (41)
PREHEAT Flow: [42],
Min, Preheat Temperature: 09] GasCup Sze: (43)
Max. nterpass Temperature 20}
TECHNIQUE
TLECTRICAL Stringer or Weave: (48)
‘Current & Polarity rc Method of leaning: [45]
“Amperage Range: [ea] Osciltion: (46)
Pulsed Current: (23) Contact Tube to Work Distance: | (47)
‘Wire Feed Speed (pm) (eq) Multipass or Single pass per side: [48]
Voltage Range: es} Number of Electrodes: (49)
‘Travel speed IPM (2s) Electrode Spacing: (50)
“Transfer Mode: 7 Peening: (51)
Maximum Heat Input Jin [23
Tungsten Type: [ea]
“Tungsten Diameter: (30)
‘VISUAL EXAMINATION: 52],
TENSILE TESTS
“Specimen No, With | Thickness | Area] Ukimate Total] Ukimate Unit | Type of Fallure
in. in int Load tbs) | stress(ps)_| Location
ea 54 eT eo) 7) 8) 3)
(GUIDED-BEND TESTS
Type eau Type Results
(60), (64) (62) (63)
Welder'stame = 6a) StamporclckNo, ss)
‘We certty that the statement in ths ecord are corectandthtthe test welds were prepared, welded, and tested in acordance with he requirements of
the Part 8 Practal CW Exam Requirements isntended tobe used for the CWI Part Exam only andis nat Intended tobe used for actual production
welding or anyother se without the written coneant of AWS.
31