Professional Documents
Culture Documents
Fixit Heatshield
Description
Dr. Fixit Heatshield is a heat reducing & ‘Energy Saving’ elastomeric coating composed of acrylic emulsion
polymers, microspheres, properly selected & graded inert fillers, light fast & weather durable white pigments,
additives & water as medium. It is used as a heat insulating coating on building rooftops & exterior walls because it
helps in reducing power consumption substantially by reducing the load on air-conditioners & keeps the interiors
Areas of Application
}} Terraces and rooftops of buildings - cementitious, asbestos & metal surfaces
}}Industrial & godown shades with GI or asbestos roofs
}}Exterior walls of buildings
}}Cold storages, computer server rooms, electrical control panel rooms, etc
}}Metal & concrete storage tanks for water, chemicals and fuel in petrochemical industry
Method of Application
Surface Preparation: on Cementitious Surfaces
}}Surface to be applied upon must be free from dust, loose material, paint, oil, or any other material which may
impair adhesion
}}Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids
and liquids can be done if required
}}All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack X or Dr. Fixit Unifiller.
}}Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP or Dr. Fixit
Unibond SBR modified mortar or as specified.
602-26/07/13
233
Coatings & Paints
1 P rimin g
}}All new cement-sand renderings & concrete surfaces should be allowed to age for 6 to 8 weeks before surface
coating
}}Attain SSD condition before priming
Prime with Dr. Fixit Primeseal (2 part primer : 1 part water)
602 Dr. Fixit Heatshield
}}
Technical Information
Packing
Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.doctor-fixit.com • drfixitadvice@pilmail.com expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800-209-5504 does not assume any liability or consequential damage for unsatisfactory results,
235