Professional Documents
Culture Documents
PARKING BRAKE - PARKING BRAKE SYSTEM - ADJUSTMENT (2008 XB) PDF
PARKING BRAKE - PARKING BRAKE SYSTEM - ADJUSTMENT (2008 XB) PDF
ADJUSTMENT
1. INSPECT PARKING BRAKE LEVER TRAVEL
(a) Slowly pull the parking brake lever to the fully applied position, counting the number of clicks.
(b) Loosen the lock nut and adjusting nut to completely release the parking brake cable.
(c) Strongly step on the brake pedal 3 to 5 times with the engine stopped.
(d) Turn the adjusting nut until the parking brake lever travel is
corrected to within the specified range.
(f) Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
1 of 2 2/28/2008 11:37 AM
PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT (... https://techinfo.toyota.com/t3Portal/document/rm/RM05G0U/xhtml/RM...
(h) Release the parking brake lever and check that the clearance
between the rear disc brake cylinder operation lever and the
stopper is within the specified range.
Clearance:
0.5 mm (0.02 in.) or less
(i) When operating the parking brake lever, check that the brake warning light illuminates.
Standard:
Brake warning light always illuminates at the first click.
2 of 2 2/28/2008 11:37 AM