Professional Documents
Culture Documents
Materials:
Pipe Cleaners
Elastic
Thread
Pencil
Sewing machine
Scissors
DIRECTIONS
1. Make sure your hands and area have been 3. Cut pattern out of paper.
cleaned before making the masks. Using a pencil, trace pattern
2. Carefully cut the corners of the vacuum bag. unto vacuum bag. DO NOT
PIN PATTERN TO BAG.
DIY MASK
4. Cut out masks. 5. Take one mask. 6. Open mask up. Take
top layer and flip it up.
7. Take one pipe cleaner 8. put hot glue on one 9. Let glue cool a little. If it’s too hot it
and bend it in half. side of pipe cleaner. will melt the fabric. Once cooled a
little, attach pipe cleaner to mask.
DIY MASK
10. Fold back top 11. Stitch top & 12. Cut elastic to 11” 13. Cut elastic in
layer. bottom. or length of paper. half.
14. You should now 15. One piece of 16. make sure elastic 17. Stitch edge of elastic to
have two pieces of elastic will be is lined up to the mask.
elastic. attached to the top, side of mask but
the other piece on should be slightly
the bottom. below top of mask.
DIY MASK
18. Stitch other three sides of 19. Fold mask. Make sure 20. Stitch along the side of
elastic to mask. fabrics are lined up. mask.
21. Once you have one stitch done, flip mask over 22. Mask is finished! Cut off any loose
and make a second stitch closer to the edge. Repeat threads. Good job. Now you can start
steps 20 & 21 to other side of mask. making the other three masks!
DIY MASK