Professional Documents
Culture Documents
1. SCOPE
1.1 The Department has based its specifications on portland cements, masonry, and blended
cement on ASTM specifications located in Volume 4.01 or AASHTO M 85.
1.2 Table 1 lists references to specific specifications and individual test methods.
2. TESTING INFORMATION
2.1 The following information pertains to the testing of portland hydraulic cement.
2.1.1 CST/M&P is solely responsible for performing or having tests performed on these
products.
2.1.2 Portland hydraulic cement, Blended Types IP and IS, and masonry cement should
conform to all requirements of the applicable Standard Specifications for Construction of
Highways, Streets, and Bridges, special provisions, or special specifications.
3. REFERENCE LOCATION
Table 1—Test Method References