JICA Assisted Yamuna Action Plan Project (111)
JICA Loan No, ID-P 215
NJS Consultants Co., Ltd. (Japan) In Consortium with
Regd. Ofice ‘ABCOM India Pvt Ltd.
1-11, Shipaura,Chome Minato-ku, Tokyo-105-0028, ‘TTI Consulting Engineers India Pvt. Ltd.
ssuwsns-consultantscomn, Tel, @1-3-6324-4344, Fax 81363244345 INJS Engineers India Pvt.Ltd.
TRANSMITTAL SHEET
TS Ref. No. PMC/Y AP-IIl/ DIB/K3/2020/481 ‘Date: 28" February” 2020
Project Name ‘Rehabilitation and Up-aradation of Kondli: Phase I (45.5 MLD), Phase II (113.7 MED) &
Phase HII (45.5 MLD) Wastewater Treatment Plant (WWTP) with effluent standards of
BOD -i0 mg/l, TSS~ 10 mgil or better under YAP (i)
Executing Agency / Client | Dethi Jal Board, Delhi
Contractor Mis Triveni Engineering & Industries Ltd.~ GS] Envo Ltd- M/s Gharpure Engineering &
Construction Pvt. Ltd.JV)
To, CC:
Client Address ‘The Executive Engineer (C) DRIX ‘The Executive Engineer (SDW) IV
Delhi Jal Board (Govt. of NCT of Delhi) | Dethi Jal Board (Govt. of NCT of Delhi)
Jagriti Pump House, Near Karkardooma | Kondli STP, Near Mayur Vibar, Phase-IIl,
Crossing, Shahdara, Delhi — 110 092 Delhi-110 096
E-mail: eecdr9ram@gmail.com E-mail: gesdw4.djb@nic.in
Ref, Contractor Letter, No, | _3.1/PXD-1320/DIB-Kondli/STP/D&E/650- 17/02/2020
651-652
Ref, DIB Letter No. F-Q7)DIBIEE (C) DR-XI2019-204155, 2570272020)
Sub Document Revision | Recommended Category
Sub. Document Reference [1- PXD-1320-13-112-A (IDocument) o1 “er
2. PXD-1320-13-112-B (3 Sheets) oO “cr
3. PXD+1320-13-112-C (1 Sheet) a scr
T. Design Calculation of Filter Feed Sump for Phase — I (10 MGD) Wastewater
‘Treatment Plant (PXD-1320-13-112-A) (Total 1 Document)
2. GA Drawing of Filter Feed Sump for Phase ~ I (10 MGD) Wastowater Treatment
Plant (PXD-1320-13-112-B) (Total 3 Sheets)
3. Arch Drgs of Filter Feed Sump for Phase — I (10 MGD) Wastewater Treatment Plant
(PXD-1320-13-112-C) (Total 1 Sheet)
Document Subject/Title
Document Reseiving Date — | 19702/2020
Review Date 25/02/2020, J
Reviewed b Mr, Rajat Garg { >
Enclosure: PMC Comments Sheet Atached @ Page) z
“Approved by
a
Suraj Aggarwal
Deputy Project N
‘Acknowledgement (Received the above)
Note: Recommended category deseription
Category Description
A". Recommended for Approval
=B°. | Recommended for Approval subject to incorporation of comments as marked
=C*. ‘Returned with comments & resubmission required
=D”. ‘Retained for Information onl
Project Ofice: 404, 4 Floor, 12 Gagandeep Building Rajendra Place, New Dslhi~ 170008,
CIN: F03629Package-K3
1. Structural Design Calculations for Filter feed Sump for Phase-I (10 PXD-1320-13-112-A (Rev. - 1)
MGD) Waste Water Treatment Plant
2. GA & Reinf Drawing of Filter feed Sump for Phase-I (10 MGD) Waste PXD-1320-13-112-B (Rev. 1)
Water Treatment Plant (3 Sheets)
3. Arch Drawing of Filter feed Sump for Phase-I (10 MGD) Waste Water PXD-1320-13-112-C (Rev. 1)
‘Treatment Plant (1 Sheet)
Comments Sheet (TS Ref No PMC/YAP-IIU/DJB/K3/2020/481)
Sr. | PMC Observation Dated 29.11.2019 | Contractor’s Resolution for | PMC Observation Dated
No. | (Rev. 0) PMC Observations Dated —_| 28.02.2020 (Rev. 1)
14.02.2020 (Rev. 0)
Architectural Drawing - PXD-1320-13-112-C
1. | As per Page No 800 of CA, Cl 33] Noted. Toilet details and | Noted and provide details and give
(xxxvi), All Control Room & Pump
Houses shall be provided with toilet of
minimum size of 3m x 2m accordingly
modify the drawings along with design
calculations. Hence same shall be
incorporated in this Pump House as well,
Please revise the drawing and design
according!
locations are to be furnished
separately,
reference of the drawing in this
drawing,
+ Filter house footing is
overlapping filter feed sump
footing. Redesign the footing.
+ Effective length factor Ely and
ELz shall be considered.
+ Subgrade modulus to be as per
geo tech report.
+ In wall and footing design
calculation, central moments are
considered in the design, comer
‘moments (Mx and My) along with
corresponding Mxy shall be
considered in design.
+ On grid 34, cantilever portion of
the bypass channel loads to be
considered in design.
3. Tn architectural drawing,
+ Note no. 4 and 5 to be corrected.
+ In schedule of finishes, 6mm
thick plaster on roof to be
provided.
+ Provide stainless steel cat ladder
to access the roof as per CA.
+ Provide ramp at rolling shutter
location.
+ Provide notes relevant to this
building only.
4 Tn civil/reinf. drawing notes,
+ Add Note “All Civil GA
Drawings shall be as per approved
Mechanical Drawing and it shall
be confirmed at site before start of
Page 1 of 2Sr. | PMC Observation Dated 29.11.2019 | Contractor’s Resolution for
No. | (Rey. 0)
PMC Observations Dated
14.02.2020 (Rev. 0)
PMC Observation Dated
28.02.2020 (Rev. 1)
work. If there is any discrepancy
between these drawings then it
shall be informed to Engineer in
Charge.
+ Base slab cover to be updated to
50mm for both i. top and bottom
and in contact with water
+ Remove note no. 10-13. Provide
notes as per CA.
+ Make all the changes as per
design calculations in drawings.
Note:
All design and drawings and construction shail be in full compliance with the requirement of
contract specifications including addendum and corrigendum.
‘Recommendation:
Category “C”: Returned with Comments & resubmission Required.
Rayo GG
(Rajat Garg)
Page 2 of 2