Professional Documents
Culture Documents
Thank you for your choice of the Graham Farish Class 04 diesel locomotive. Parts
Running in 1 Motor
The mechanism of this model requires running in (without a load) for 2 Driving wheels
approximately 1 hour in each direction at moderate speed. 3 Pickups
4 Gears
Curves 5 Loco baseplate
6 Couplings
This locomotive is suitable for use on track with curves of first radius
(approx. 9 inches / 225 mm) or greater When ordering parts please
quote the catalogue number 1
Body removal
together with the livery of the
Remove the four screws, two each end of the chassis, as indicated on the model (if appropriate) and
diagram. number of the part required.
Lubrication 2
When required, sparingly lubricate the motor bearings using plastic
compatible light oil and the gear train with model grease. Suitable lubricants 6
are Bachmann E-Z Lube item 99984 or Woodland Scenics ‘HobbyLube’ Lite
Oil item HL654. 3