Professional Documents
Culture Documents
A)Weak fabric
B) marginal strength
C)airworthy fabric
27.Seyboth and Manual fabric strength testers are not designed for
A)cotton
B) linen-covered aircraft
28.Aircraft fabric recovering is required only when original fabric covers deteriorate to
A)60%
B)70%
C)80%
29._______ is mixed with clear butaryte dope for the prevention from ultraviolet rays.
A)Aluminum flake
B)Copper flake
C)Magnesium flake
A)Clad aluminum
C)both
A)70°F
B)50°F
C)90°F
32.The relative humidity in a dope room should be below
A)80%
B)70%
C)60%
A) 40 lb
B)20 lb
C)15 lb
34. The sewing speed while repairing the fabric should never exceed speed greater than____if damage
area exceeds 16 inches.
A)150 MPH
B)180 MPH
C)190 MPH
A)10
B)12
C)15
A)2 lb
B)4.5 lb
C)5 lb
A)distilled water
B)carbonated water
C)mineral water
B)48hrs
C)24hrs
A)40 lb
B)30 lb
C)20 lb
A)Weak fabric
B) marginal strength
C)airworthy fabric
A)airworthy fabric
B) marginal strength
C)weak fabric
42._________are designed for use on the dope finished-fabric surface of the aircraft.
A)Seyboth tester
A)Thinner
B)film base
C)plasticizer
A)Filmbase
B)thinner
C)plasticizer
46._______ causes cellulose to precipitate from dope film & form white porous deposit called Blush
A)pressure
B)temperature
C)moisture
A)vertically
B)horizontally
C)both
A)vertically
B)horizontally
C)both
A)envelope method
B)blanket method
C)none
50.When the damage is removed ________patch is sewed to the edges of the cutout.
A)Rectangular
B)square
C)circular
D)both A &B