Industry standards regarding the amount of permissible leakage of the process
fluid through a valve's seat or seal — most applicable to throttling valves
Leakage Class Maximum
Designation
Clase |
Classi
Class
‘Class
Clase V
lass
Allowable
Leakage
NA
0.5% of rated
ceapacty
0.1% of rated
‘capacity
0.01% of rated
capacity
10.0008 mi per
minute of water
‘er inch of port
‘ameter per psi
erent
Notto excesd
Clase VI standare
‘er pot diameter
Test Medium
NA
‘ror water at 50
125° F(10- 82°C),
As above
As above
Water at 50
0126 (10t0
52)
‘Aico itogen at
S00 125°F (1010
52°C)
‘Test Pressure
NA
Lower of 45 -60 psig or
‘maximum operating.
cierentit
As above
‘As above
‘Maximum service pressure
op aorose valve plug not
{0 exooed ANS! body rating
150 pig or max rate
dierent pressure across
valve lug whichever is
lower
Test Procedure
‘No Test
Lower of 45-60 psig or
‘maximum operating
cSferenit
As above
‘As above
Maximum service pressure
‘op across vaive pig not
tw exceed ANS! body rang
‘Actuator should be
‘aqusted to operating
‘onions speciied with
{ull rrmaleosing thrust
‘applied to valve plug soal