Professional Documents
Culture Documents
All data of the lift installation are therefore converted by LM LIFTMATERIAL into a so
called „prm“-file, which is then packed together with the parameter setting protocol
into a zip.-file an sent out by e-mail to the manufacturer of the frequency inverter.
In case of loss of data or damage of the data on transport, the zip.-function warrants
that the file is illegible. Thus wrong setting of parameters is fully avoided.
The manufacturer of the frequency inverter transfers the „prm“.-file into the frequency
inverter. A label on the frequency inverter classifies it as having pre-set values.
In case that data have been lost, e.g. due to fault in procedure. the frequency inverter
can be re-programmed at the site by means of the parameter setting protocol which
is glued on the backside of the cover sheet of the frequency inverter.
Seite 1 von 1