STANDARD SPECIFICATIONS.
All drums shall become the property of the Department or ADWEA as directed by the Engineer.
The cables shall be supplied in drum lengths specified herein for each cable size unless otherwise
‘approved by the Engineer and ADWEA.
Cable (XLPE Cu) | Pram cont
4x 240 mm 300
4x 120 mm 500
4x70 mm? 500
4x25 mm? 4,000
4x16 mm? 1,000
4x10 mm? 1,000
1604.06 Markings
All cable drums shall be clearly engraved in English and Arabic language as follows:
Name of manufacturer.
Sizes and number of conductors.
Voltage.
Drum number.
Length of cable,
Contractor's order number.
Weights - net and gross.
‘Shipping identification marks.
Inspector's certificate identity marks.
J, Contractor's name, address in Abu Dhabi, United Arab Emirates and Contract Number.
k. Direction of rotation.
|The "A" and "2" ends of the cables to indicate the lay of the cable cores.
{mn addition to the above, two metalic sheets 16 cm x 12 cm fixed on each side of the drum by four
screws shall be marked with the cable length, size and order number in English and Arabic
language.
Version 2.0 Section XVI-4 November 2014
Page 5 of 11