Professional Documents
Culture Documents
DATE:14.04.2020
TO:
SUB: Quotation for Twin Screw Extruder for PVC Pipes for Dimensions of 20 to 110mm
Dia.
With Reference to your discussion you had with us regarding requirement of PVC Pipe Plant.
Please Find here under our Lowest Offer for the same for your kind consideration
1) EXTRUDER:
Twin Screw Extruder VEX-2-52-25V for RPVC Pipe 15 KW AC motor and Drive. O/P: 150-
250 Kg/ hr.
Model 2-52-25V
6) Upstroke Cutting Saw SPR 110R with extended bed (Up to 110mm)
Model SPR 110 R
Pipe Dia. Range 20 -110 mm OD
Center Height 1160 ± 50mm
Saw Motor 1.5 KW
Suitable for Speed Range Up-to 15 Mtr. /min
Saw Carriage Pneumatic Cylinder Stroke 1000mm
Saw Blade Diameter 350 mm
Saw Blade Set Tungsten Carbide Tip – Thick walled Pipe Carbon steel Blade
-Thin walled Pipe
Pneumatic Cylinder, FRL, Pressure Regulator, Standard
Solenoid Valve, Control valve, Pressure Gauge
Chilling Plant
Heat transfer rate : 30 000 Kcal /Hr.
Inlet water temperature : 12 Degree C.
Outlet water temperature : 15 Degree C.
Air compressor : 2 HP, 2 cylinders, 500 RPM
Tank Capacity – 113 liters
Air requirement – 2000 liters / hour
Total Floor Space : 31.00 M L X 7.00 M W X 4.00 M H
We hope the same is in line with your requirement and should you require any further
clarification please do contact us.
Yours faithfully
Vaishnavi Extrusion Industries Ltd