This document discusses the results of an engineering simulation. The simulation analyzed a beam under a distributed load and calculated the beam's deflection to be 0.61 inches at the center. The beam had a length of 10 inches and a modulus of elasticity of 4.0 pounds per square inch. The document was produced using Autodesk student software.
This document discusses the results of an engineering simulation. The simulation analyzed a beam under a distributed load and calculated the beam's deflection to be 0.61 inches at the center. The beam had a length of 10 inches and a modulus of elasticity of 4.0 pounds per square inch. The document was produced using Autodesk student software.
This document discusses the results of an engineering simulation. The simulation analyzed a beam under a distributed load and calculated the beam's deflection to be 0.61 inches at the center. The beam had a length of 10 inches and a modulus of elasticity of 4.0 pounds per square inch. The document was produced using Autodesk student software.