Professional Documents
Culture Documents
TRACTORS
5020, 5R, 6000, 6010, 6020, 6030, 6030 Premium, 7030 & 7030 E Premium,
7000, 7010, 7020, 7030, 8000, 8010, 8020, 8030 Series
CATALOGUE INDEX
6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium.................. 3-8
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 2
Front fenders, rear fenders, side extensions, mud guards
6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium Series tractors
W 265 mm, L 1000 mm - RH or LH (2WD) 6020 & SE, 6015, 6030, 6025 AL180331
W = Width, L = Length
Width
Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 3
TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS
Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
Turnable front fenders allow a better steering angle - for easier and faster
turning e.g. on the headland - and therefore significantly better
manoeuvrability of the tractor.
Please find on the next page more information regarding front fender widths and
corresponding tyre sizes.
W = Width, L = Length
W 265 mm, L 1000 mm (2WD only) 6020 & SE, 6015, 6030, 6025 AL180215
Base mounting kit for rigid front fenders (MFWD) 6020 & SE, 6015 AL71218
W 370 mm, L 1280 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180095
W 420 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180097
W 480 mm, L 1440 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180099
W 540 mm, L 1540 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180101
W 620 mm, L 1560 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180103
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 4
Overview of TURNABLE front fender widths in combination with corresponding tyre sizes
TURNABLE
Tyre sizes
fender width
4 cyl.: 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28,
370 mm 320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
Overview of RIGID front fender widths in combination with corresponding tyre sizes
RIGID
Tyre sizes
fender width
4 cyl.: 280/70R16, 10.5/80-18, 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28,
370 mm 280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28
6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 5
REAR FENDERS - INDIVIDUAL PARTS
Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 6
REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITS
Kits include side extensions (RH & LH) plus the necessary hardware for field installation.
18.4R30,
cab only: 6030, 6030 Premium, 16.9R34, 18.4R34, 480/70R34,
110 x 60 mm - RH & LH 13.6R38, 14.9R38, 16.9R38, 420/85R38, AL174768
7030 & 7030 E Premium
18.4R38, 460/85R38, 480/70R38,
520/70R38, 540/65R38
cab only: 6030, 6030 Premium, 520/70R38, 20.8R38, 520/85R38,
200 x 20 mm - RH & LH AL174769
7030 & 7030 E Premium 580/70R38, 600/65R38, 650/65R38
Mud flap
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 7
MUD GUARDS FOR STEPS - INDIVIDUAL PARTS
Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Mud guard - RH 4 cyl. models with suspended cab: 6020, 6030 Premium L116673
Mud guard - LH all 6 cyl. cab models: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L116672
Mud guards - RH & LH 4 cyl. models without suspended cab: 6030, 6030 Premium AL174141
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 8
Front fenders, rear fenders, side extensions, mud flaps, mud guards
6000, 6010 Series tractors
W 265 mm, L 1000 mm - RH or LH (2WD) 6000 & SE, 6010 & SE, 6005 AL180331
W 370 mm, L 1280 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180330
W 420 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180327
W 420 mm, L 1315 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180329
W 480 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180326
W 540 mm, L 1540 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180325
W 620 mm, L 1560 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180332
W = Width, L = Length
W 370 mm, L 1280 mm - RH & LH 6000 & SE, 6010 & SE AL180096
W 420 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180098
W 480 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180100
W 540 mm, L 1540 mm - RH & LH 6000 & SE, 6010 & SE AL180102
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 9
RIGID FRONT FENDERS - FIELD INSTALLATION KITS
Kit includes rigid front fenders (RH & LH) plus the necessary hardware for field installation.
W 265 mm, L 1000 mm (2WD) 6000 & SE, 6010 & SE, 6005 AL180215
Base mounting kit for rigid front fenders (MFWD) 6000 & SE, 6010 & SE, 6005 AL71218
W = Width, L = Length
C
A B
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 10
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
C
A
B Side extension - LH or RH cab only: 6000 & SE, 6010 & SE L101609
C Additional side extension - extra wide, LH or RH cab only: 6000, 6010 & SE L110877
only in combination with A or B
Side extension
already installed
Mud flap
Mud flap - RH cab only: 6000, 6010 & SE L110876 For tractors with fender side
extensions (A or B see above)
Mud flap - LH cab only: 6000, 6010 & SE L110875 already installed.
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 11
MUD FLAPS FOR REAR FENDERS / EXTRA WIDE - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Mud flap, extra wide - RH L110611 These mud flaps are recommended if one
cab only: side extension, plus the additional side
6000, 6010 & SE extension L110877 are already installed on
Mud flap, extra wide - LH L110610 each fender.
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 12
Front fenders, rear fenders, side extensions
5020 and 5R Series tractors
W = Width, L = Length
11.2R20,
W 370 mm, L 1280 mm 5020, 5R LG102498 12.4R24, 320/85R24,
11.2R28, 280/85R28
13.6R24, 340/85R24,
W 420 mm, L 1440 mm 5020, 5R LG102500 360/70R24, 380/70R24,
420/65R24
W = Width, L = Length
W = Width, L = Length
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 13
REAR FENDERS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Rear fender
Side extension
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 14
Front fenders, rear fenders, side extensions, mud guards
7000, 7010, 7020, 7030 and 8020, 8030 Series tractors
W = Width
W = Width
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 15
DELUXE TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS
Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.
W 480 mm - RH & LH 7020, 7030 RE238910 7020: from serial no. 032705
Complete
Goods
W 620 mm - RH & LH 7020 RE211529 7020: up to serial no. 032704
W 620 mm - RH & LH 7020, 7030 RE238909 7020: from serial no. 032705
8030
W 480 mm - RH & LH with 1300 Series RE260608 8030: from serial no. 007242 Complete
MFWD front axle only Goods
8030
W 480 mm - RH & LH with 1500 Series RE308214
MFWD front axle only
8020, 8030
W 480 mm - RH & LH RE236667
with ILS*) only
8030
W 620 mm - RH & LH with 1500 Series RE308215
MFWD front axle only Complete
Goods
8020, 8030
W 620 mm - RH & LH RE236670
with ILS*) only
*)
ILS = Independent Link Suspension; W = Width
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 16
REAR FENDERS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
Rear fender
RH 7000 R110834
EPDC
LH 7000 R110835
RH 7010 R131968
RH 8000 R111888
up to serial no. 009999
LH 8000 R111887
EPDC
RH 8000, 8010 R131966
from serial no. 010000
LH 8000, 8010 R131967
7020, 7030,
RH - without fender extension installed R162233
8020, 8030
EPDC
7020, 7030,
LH - without fender extension installed R162234
8020, 8030
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 17
REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
RH 7000 R114745
EPDC
LH 7000 R106378
RH 8000 R122008
up to serial no. 009999 EPDC
LH 8000 R122007
RH 7030 R237642
EPDC
LH 7030 R237645
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 18
ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
A - Fender side
extension (2.50 m)
B - Additional
fender side
extension -
extra wide (2.75 m)
B - extra wide - LH
7030, 8030 R233544
2.75 m width
Please check the corresponding
parts catalogue for more details.
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 19
MUD GUARDS FOR STEPS - INDIVIDUAL PARTS
Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.
John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 20