Professional Documents
Culture Documents
Ball bearing
4:1 RUD
ID VWBG-V -40°–
100°C
350°C
max.
Product features
VIP Load ring for bolting -Vario / VIP Load ring for bolting
/ Comprehensive range of threads and WLL / Rotatable at nominal WLL, 90° to the bolt-on direction.
(M8 – M150 bzw. 0,3 t – 40 t).
Available as: / Variable bolt lengths available for tapped or through holes
– Standard Metric Thread (DIN EN 13) (available nuts etc. see p.39).
– Metric Fine Thread (DIN EN 13)
– Coarse Pitch Thread UNC (ANSI B1.1) / VWBG-V: RUD bolts with special corrosion protection
– VWBG: Coarse thread BSW (BS84) Corrud-DT.
/ Clear marking of the minimum WLL for all loading / Large distance between bolt-on surface and load to avoid
directions. Higher WLL possible when location and damage.
installation is optimised( compare WLL chart / product
information).
Y
X
Z
WLL WLL WLL
Testing specifications: GS-OA-15-04:2015-12 / Please observe torque instructions when lifting point
/ Certificate No.: OA 1651056 is permanently installed resp. at constant swivelling
operations and tilting/ turning actions.
/ VWBG: Component according to the
test criterias of BG/DGUV “GS-OA-15-04” Other important RUD specific information and specialities
to our RUD lifting points can be found on page 9 and in
the specific user instruction (www.rud.com).
VWBG-V VWBG