Professional Documents
Culture Documents
Print out these pages to make a line-following track for your Scribbler
Robot.
This file contains one copy of each shape. You may print out more copies of each
shape as needed for the track you design.
• Place your tracks on a HARD, FLAT, SMOOTH surface. Line following may not
work well on carpet.
• If your paper is thin, dark surfaces may show through the paper. This may make
the black line harder for the Scribbler to see. If this happens, use heavier paper,
or move your track to a lighter-colored surface.
• The Scribbler robot’s line sensors are precisely tuned to focus on the floor. If you
raise or lower your Scribbler, it may not be able to see the line. Therefore, do not
take the tires off of the wheels, since that positions your Scribbler too close to the
floor.
If you need assistance, please make use of the contact information at the
top of this page.
© 20 Parallax Inc. • Line-Following Tracks for Scribbler Robot (#28136) • /20 Page 1 of 11
Line Following Code