ROCKMAN INDUSTRIES CHENNA! PVT. LTD.
ANNEXURE | TO PO NO. 4100031829 DATED 17.03.2016
Technical specification
Tooling Type Diecast Die ]
[No oftavity YT wo 4
Machine Tonnage ~*~ ATO 1
“Cavity Material ~—=~S*S*S*S*S ‘EVAR as
[Mold Base Material = |CENB Cast -
"Core Pin waterial~——~—SCSCS*«*~ 7
100000 Shots
Guarantes
1. Die Design to be shared for approval including castable 3D model
2, Flow Analysis to be shared
3. Die Inspection Report to be shared at every stage and finally overall inspection report of the die
to be sent along with die
4. Die Inserts Hardness to be maintained as 46-48HRC
5. Any design changes during manufacturing of die to be shared with us and same to be updated in
initial design
6. All Trials (Casting) to be conducted in similar tonnage machine or as agreed with RICPL.
7. 100% part print requirements needs to be met
8. For Significant dimension PPK>= 1.67 needs to be met
9. It is responsibility of die maker to make as many trial as required to meet the part print
requirements
10. Free samples to be shipped at each stage of Trials as per follows
> TOTrial-10 shots
> T1Trial-10Shots
q > Buy off - 50 shots
Regd. Office : No.6, C.P. Ramaswamy Road, Oxford Centre, Alwarpet,
| Chennai - 600 018, Phone:9176655850 CIN: U29230TN2008PTCO65985
Works : Cheyyar SIPCOT Industrial Estate, Plot No 7/8, Chellaperumpulimedu,
Cholavaram Post, Cheyyar Taluk, Tiruvannamalai District, 632701. Tamil Nadu, india
Striving for a greener planet Phone: +91-4182-399700ROCKMAN INDUSTRIES CHENNAI PVT. LTD.
11. Material Test report to be provided
12. One set of core pins, Ejector Pins, loose piece and Sprue Bush should be supplied along with
Tool.
Heat Treatment
a. After pre-machining of inserts before CNC milling insert to be stress relieved
b. Vacuum Heat Treatment with 108ar quenching is to be followed up during Heat
Treatment and Three stage tempering to be followed,
After all finish machining and Die is ready for trial Inserts to be stress relieved again
t 14. Nitriding
Once Die is proved and ready for shipment, Plasma Nitriding to be done.
Porosity Level need to prove as per drawing requirement
16. Die Trail Casting to be proved similar tonnage machine.
‘Authorized Signatory.
RA
(otal
Regd. Office : No.66, C.P. Ramaswamy Road, Oxford Centre, Alwarpet,
Chennai - 600 018. Phone:9176655850_ CIN: U29230TN2008PTCO66585
Works : Cheyyar SIPCOT industrial Estate, Plot No 7/8, Chellaperumpulimedu,
Cholavaram Post, Cheyyar Taluk, Tiruvannamalai District. 631701. Tamil Nadu, India,
Phone: +91-4182-399700