Professional Documents
Culture Documents
Surface Profile
The proper and effective preparation of a surface prior to coating is essential. Making sure that the correct
roughness – or profile – has been generated is essential.
If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the
danger that the profile peaks will remain uncoated – allowing rust spots to occur.
97
Surface Profile
Scale (Divisions: 0-10) Blue Band: Indicates surface is generally accepted as suitable for painting
Yellow Band: Indicates the surface is suitable for sprayed metal coatings
Red Band: Indicates the surface is suitable for hard sprayed metal coatings
Dimensions 90 x 5 x 25mm (3.5 x 2 x 1”) Weight 185g (6oz)
Part Number A101A-45A
Dimensions 19 x 54mm (0.75 x 2.13”) test area Number of Tests 50 per roll
Elcometer 122 Coarse Elcometer 122 X-Coarse Elcometer 122 X-Coarse Plus Elcometer 122 Paint Grade
Range Metric 20-50µm 38-114µm Profiles alone 114µm 33-84µm
Imperial 0.8-2.0mils 1.5-4.5mils Profiles alone 4.5mils 1.3-3.3mils
Part Number E122----B E122----C E122----F E122----D
98
www.elcometer.com Surface Profile
Grit Shot
Section Profiles 25, 60, 100, 150µm 25, 40, 70, 100µm
Part Number E125----1 E125----2
Elcometer 129/1 Rubert Grit Elcometer 129/2 Rubert Shot Elcometer 129/3 Rugotest Shot and Grit
N6, N7, N8, N9, N10 and N11
Section Profiles 0.4, 0.8, 1.6, 3.2, 6.3 and 12.5µm 0.4, 0.8, 1.6, 3.2, 6.3 and 12.5µm equivalent to 0.8, 1.6, 3.2, 6.3, 12.5 and 25µm
roughness averages respectively
Part Number E129----1 E129----2 E129----3
99
Surface Profile
Surface Cleanliness
see pages 103-106
☛
☛
Coating Thickness
see pages 131-151
☛
☛
100
www.elcometer.com Surface Profile
FEATURES
• RS232 output for statistics printer or PC
• Working range: Ra 0.01 to 100µm (0 to 4mils), Ry/Rz 0.02 to 300µm (0 to 12mils)
• Cut-off lengths: 0.25, 0.8, 2.5mm (0.01, 0.03, 0.1”)
• Sampling lengths: 0.25, 0.8, 2.5mm (0.01, 0.03, 0.1") • Number of sampling spans: x1, x3, x5
Model Description Part Number
Elcometer 7060 Elcometer 7060 SURFTEST SJ-201P Roughness Tester K0007060M003
FEATURES
• Analysis graphs: BAC1, BAC 2, ADC
• Working range: Ra 0.01 to 75µm (0 to 3mils), Ry/Rz 0.02 to 300µm (0 to 12mils)
• Cut-off lengths: 0.08, 0.25, 0.8, 2.5, 8mm (0.003, 0.01, 0.03, 0.1, 0.31”)
• Sampling: 1x, 3x, 5x Digital filter and recording magnification
• Statistics: minimum, maximum, standard deviation, pass ratio, frequency distribution
• Adjustable limits
• RS232 output to statistical printer or PC
Part Number
Model Description
UK 240 EUR 220 US 110
Elcometer 7060/4 Elcometer 7060/4 SURFTEST SJ-301 Roughness Tester K0UK7060M002 K0007060M002 K0US7060M002
101