EU
VERITAS
CERTIFICATE OF INSPECTION
N° BNET7-NR-051/01 (RN: 40698) Date 19 MARCH 2017 Pogel / 1
THIS IS TO CERTIFY, that the undersigned surveyor to this society did at the
request of JOHNNY CHEONG WELDING & ENGINEERING attended at Johnny
Cheong Welding & Engineering's yard, Kuala Belait, for the purpose of
inspecting the equipment mentioned below and reports as follows:
DESCRIPTION : PORTABLE STEEL GANGWAY
‘SERIAL NO 2 ARUS-GW-001
‘MANUFACTURER : Johnny Cheong Welding & Engineering
DATE OF MANUFACTURED 23/2017
Ww 27,900 kgs
Swi 1.900 + 500 kgs (Max. 2 persons only)
cw 22.400 kgs
DIMENSION 2 15,000mm (L} x 1.300mm (W) x 1.100mm (H)
DATE OF INSPECTION 219 March 2017
PREVIOUS INSPECTION = INITIAL INSPECTION
PARTICULARS 4 Nos. for lifting with pad eye 25mm (thk}
8 Nos. for lashing with pad eye 20mm (thk)
2.Nos, Pad eye for swing rope with H : 3000mm,
TECHNICAL REFERENTIAL : BSP-72-Procedure-012 : 2013 - PLIC 009
INSPECTIONS AND TESTS
Reviewed of manufacturer's document. (Approved drawing by ABS no. C4687/S32)
Thorough visual examination was carried out.
Overload test 2 x MGW was carried out.
= Magnetic Particle Inspection was carried out by IRS ater load test with the report
no: B17B7-2328-1
CONCLUSION
BASED ON INSPECTIONS AND TESTS OF THE EQUIPMENT DESCRIBED ABOVE WAS FOUND.
SATISFACTORY AT THE TIME OF INSPECTION
NEXT INSPECTION DUE
VISUAL : 18 MARCH 2018
VISUAL/LT/NOT : 18 MARCH 2019
Reviewed by
Surveyor? Bureau Veritas Surveyor to Bureau Veritas