Professional Documents
Culture Documents
--------------------------------
IMPORTANT! IMPORTANT! IMPORTANT!
--------------------------------
You will need Sentinel System Drivers Version 5.18 or later to run the
NetSentinel NT service. If an earlier version of the driver is in
use, an event log will be generated and the service will terminate.
---------------------------------------
1.0 INSTALLATION/OPERATION INSTRUCTIONS
---------------------------------------
Specified options, if any, take effect the next time the service is
started.
After the service has been properly installed, you may reboot your
system to start the NetSentinel NT service automatically at system
boot time. You can also use either the NET command or the Service
applet in the Control Panel to manually control the service.
To use the NET command method, type the following commands at the
command prompt:
. Run the NSSRVICE.EXE executable with "/V" option, i.e. NSSRVICE /V.
---------------------
SERVICE EVENT LOGGING
---------------------
---------------------
OPERATING ENVIRONMENT
---------------------