S n Water Infra
Private Limited
Total Water Treatment Solution
Sludge De-Watering Machine — Multi Disk Screw Press
i 1h
C ie hs |
~ sll
Stas
Features
% Clog-Free & small foot print
“Fully automatic control
% Low energy consumption
“High resistance to oily sludge
Less manpower requirement
bo
0
for washing Fatrate Sludge Cote Discharge
“Very Low water requirement
fy
Dewatering Screw Press is designed to apply three functions into one unit, in which the three zones
are conditioning zone, thickening zone and dewatering zone. It is able to run continuously and
automatically to dewatering sludge up to 15% to 25% of Outlet Consistency. With this equipment,
you can remove Sludge Thickening Tank and Filter Press. Hence, reduce footprint and less
‘manpower needed for cleaning dewatering equipment and discharge of sludge.S n Water Infra
Private Limited
Total Water Treatment Solution
Available Model
Model Inlet Flow ‘Screw Specification | Electrical Load | Dimension | Rinsing Water
1% Conc. Screw | (Diameter in mm) (HP) (LxWxH) (Lihr)
1-110 1.5 m'thr 1x10 05 2.1%0.75x1.1 30
2-110 3.0 mi/hr 2x 110 075 2.4x1.05x1.4 60
1-210 6.0 mi/hr 1x 210 0.75 3.05x 0.9x1.8 40
2210 12.0 m'/hr 2x210 1.25 3.05x1.4x1.8 80
1-250 9.0 mi/hr 1x 255 1.25 3.40x1.0x2.1 100
2250 18.0 m'/hr 2x 255 20 3.40x1,55x2.1 200
1-350 25.0 m'/hr 1x 350 20 4.10x1.1x2.2 200
2-350 50.0 m’/hr 2x350 35 4.10x1.6x2.2 300
4 Due to continuous development Specification may change without notice,
tive and it may change as per site condition.
Office : G-410/20, Tajpur Road, Molarband
Extn., Badarpur, New Delhi - 44
Contact : 9582073499
npwaterinfra@gmail.com
: www.snpwaterinfra.com