Professional Documents
Culture Documents
DSE7310 DSE7320Data Sheet (USA) PDF
DSE7310 DSE7320Data Sheet (USA) PDF
DSEGenset
ELECTRO-MAGNETIC COMPATIBILITY
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
COMPREHENSIVE FEATURE LIST TO SUIT A control panel with the supplied sealing gasket.
®
DSENET RS232 AND USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT INPUTS SENDERS STOP SUPPLY 8-35V
DEUTZ
DSE7310/20 ISUZU
PERKINS
CATERPILLAR
MTU
7 VOLVO
CUMMINS
OTHER SCANIA
MAINS (UTILITY) N/C VOLT FREE N/O VOLT GENERATOR SENSING CHARGE FUEL & CRANK ELECTRONIC
SENSING OUTPUT FREE OUTPUT ALTERNATOR OUTPUTS ENGINES &
DSE7320 ONLY (Flexible with CAN) MAGNETIC PICK-UP
ISSUE 6
®
DSEGenset
DSE7310/20 SPECIFICATION
DC SUPPLY
FREQUENCY RANGE
KEY FEATURES • Reverse power (kW & kV Ar) • DSENet® expansion compatible 3.5 Hz to 75 Hz
• 4-Line back-lit LCD text display protection • Heated display option available
OUTPUTS
• Five key menu navigation • LED and LCD alarm indication OUTPUT A (FUEL)
• Front panel editing with PIN • Power monitoring (kW h, kV Ar, kV KEY BENEFITS 15 A DC at supply voltage
protection A h, kV Ar h) • 132 x 64 pixel ratio display for
OUTPUT B (START)
• Customisable status screens • Load switching (load shedding clarity 15 A DC at supply voltage
• Power save mode and dummy load outputs) • Real-time clock provides accurate
• Support for up to three remote • Automatic load transfer (DSE7320) event logging OUTPUTS C & D
8 A 250 V (Volt free)
display units • Unbalanced load protection • Multiple date and time scheduler
• 9 configurable inputs • Independent Earth Fault trip • Set maintenance periods can be AUXILIARY OUTPUTS E,F,G,H
• 8 configurable outputs • True dual mutual standby with load configured to maintain optimum 2 A DC at supply voltage
• Flexible sender inputs balancing timer (DSE7310 only) engine performance GENERATOR
• Configurable timers and alarms • USB connectivity • Ethernet communications (via VOLTAGE RANGE
• 3 configurable maintenance • Backed up real time clock DSE855 module), provides 15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
alarms • Fully configurable via DSE advanced remote monitoring
• Multiple date and time scheduler Configuration Suite PC software • Modules can be integrated into FREQUENCY RANGE
• Configurable event log (250) • Configurable display languages building management systems 3.5 Hz to 75 Hz
• CAN engine support • Remote SCADA monitoring via (BMS) MAGNETIC PICK UP
• Integral PLC editor DSE Configuration Suite PC • Increased input and output VOLTAGE RANGE
• Easy access diagnostic page software expansion capability via DSENet® +/- 0.5 V to 70 V
• CAN and Magnetic Pick-up/Alt. • User selectable RS232 and RS485 • Licence-free PC software FREQUENCY RANGE
sensing communications • IP65 rating (with supplied gasket) 10,000 Hz (max)
• Fuel usage monitor and low fuel • Configurable Gencomm pages offers increased resistance to
DIMENSIONS
alarms • Advanced SMS messaging water ingress OVERALL
• Charge alternator failure alarm (additional external modem • PLC editor allows user 240 mm x 181 mm x 42 mm
• Manual speed control (on required) configurable functions to meet 9.4” x 7.1” x 1.6”
compatible CAN engines) • Start & stop capability via SMS specific application requirements PANEL CUT-OUT
• Manual fuel pump control messaging 220 mm x 160 mm
• Engine exerciser • Additional display screens to help 8.7” x 6.3”
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-051/10/11 (13) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457