Professional Documents
Culture Documents
Date: ..........................
(a) We have examined and have no reservations to the Bidding Document, including Addenda
issued in accordance with Instructions to Bidders (ITB) 8.
(b) We offer to design, manufacture, test, deliver, install, pre-commission, and commission in
conformity with the Bidding Document the following Plant and Services: [. . . insert narrative . . .]
(c) The total price of our Bid, excluding any discounts offered in item (d) below is the sum of
[amount of foreign currency in words], [amount in figures], and [amount of local currency in words],
[amount in figures]
The total bid price from the Grand Summary (Schedule No. 8 should be entered by the Bidder inside this box.
Absence of the total bid price in the Letter of Price Bid may result in the rejection of the bid.
(d) The discounts offered and the methodology for their application are as follows: [. . . insert
discounts and methodology for their application if any . . .]
(e) Our Bid shall be valid for a period of [. . . insert bid validity period as specified in ITB 20.1 of the BDS . .
.] days from the date fixed for the submission deadline in accordance with the Bidding
Documents, and it shall remain binding upon us and may be accepted at any time before the
expiration of that period.
(f) If our Bid is accepted, we commit to obtain a performance security in accordance with the
Bidding Document.
(g) We understand that this bid, together with your written acceptance thereof included in your
notification of award, shall constitute a binding contract between us, until a formal contract is
prepared and executed.
(h) We understand that you are not bound to accept the lowest evaluated bid or any other bid that
you may receive.
Bidding Document for Substation Package-2 for 220/132/33kV Chilime Hub GIS Single-Stage: Two-Envelope
new substation (Part-I) and 220(Hybrid)/132/33kV
Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System
Project
Section – 4, Bidding Forms (Price Schedules) 4-2
Name ...........................................................................................................................................
In the capacity of ..........................................................................................................................
Signed .........................................................................................................................................
Duly authorized to sign the Bid for and on behalf of ......................................................................
Date .............................................................................................................................................
Bidding Document for Substation Package-2 for 220/132/33kV Chilime Hub GIS Single-Stage: Two-Envelope
new substation (Part-I) and 220(Hybrid)/132/33kV
Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System
Project
Section – 4, Bidding Forms (Price Schedules) 4-3
Price Schedules
PREAMBLE
General
1. The Price Schedules are divided into separate Schedules as follows:
Schedule No. 1: Plant and Equipment including mandatory Spares to be supplied from abroad.
Schedule No. 2: Plant and Equipment including mandatory Spares to be supplied from within
Employer's Country
Schedule No. 3:Local Transportation, Insurance and other incidental services (including port
clearance etc.) applicable for supply of Plant & Equipment.
Schedule No. 4: Installation Services
Schedule No. 5a: Training Charges for Training to be imparted abroad
Schedule No. 5b: Training Charges for Training to be imparted within Employer’s Country.
Schedule No. 5c: Maintenance Charges for Communication Equipment
Schedule No. 6a: Type Test Charges for Type Tests to be conducted abroad
Schedule No. 6b: Type Test Charges for Type Tests to be conducted in Employer’s Country
Schedule No. 7: Taxes and Duties
Schedule No. 8: Grand Summary
Schedule No. 9: Recommended/Optional Spare Parts
2. The Schedules do not generally give a full description of the plant to be supplied and the services
to be performed under each item. Bidders shall be deemed to have read the Employer’s
Requirements and other sections of the Bidding Document and reviewed the Drawings to
ascertain the full scope of the requirements included in each item prior to filling in the rates and
prices. The entered rates and prices shall be deemed to cover the full scope as aforesaid,
including overheads and profit.
3. If bidders are unclear or uncertain as to the scope of any item, they shall seek clarification in
accordance with ITB 7 prior to submitting their bid.
Pricing
4. Prices shall be filled in indelible ink, and any alterations necessary due to errors, etc., shall be
initialed by the Bidder.
As specified in the Bid Data Sheet and Special Conditions of Contract, prices shall be fixed and
firm for the duration of the Contract, or prices shall be subject to adjustment in accordance with
the corresponding Appendix (Price Adjustment) to the Contract Agreement.
5. Bid prices shall be quoted in the manner indicated and in the currencies specified in the
Instructions to Bidders in the Bidding Document.
For each item, bidders shall complete each appropriate column in the respective Schedules,
giving the price breakdown as indicated in the Schedules.
Prices given in the Schedules against each item shall be for the scope covered by that item as
detailed in Section 6 (Employer’s Requirements) or elsewhere in the Bidding Document.
Bidding Document for Substation Package-2 for 220/132/33kV Chilime Hub GIS Single-Stage: Two-Envelope
new substation (Part-I) and 220(Hybrid)/132/33kV
Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System
Project
Section – 4, Bidding Forms (Price Schedules) 4-4
6. Payments will be made to the Contractor in the currency or currencies indicated under each
respective item.
7. When requested by the Employer for the purposes of making payments or part payments, valuing
variations or evaluating claims, or for such other purposes as the Employer may reasonably
require, the Contractor shall provide the Employer with a breakdown of any composite or lump
sum items included in the Schedules.
Bidding Document for Substation Package-2 for 220/132/33kV Chilime Hub GIS Single-Stage: Two-Envelope
new substation (Part-I) and 220(Hybrid)/132/33kV
Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System
Project
Section – 4, Bidding Forms (Price Schedules) 4-5
Schedule No. 1: Plant and Equipment including mandatory Spares to be supplied from abroad.
Schedule No. 2: Plant and Equipment including mandatory Spares to be supplied from within
Employer’s Country
Schedule No. 3:Local Transportation, Insurance and other incidental services (including Port
Clearance) applicable for supply of Plant & Equipment
Schedule No. 4: Installation Services
Schedule No. 5a: Training Charges for Training to be imparted abroad
Schedule No. 5b: Training Charges for Training to be imparted within Employer’s Country.
Schedule No. 5c: Maintenance Charges for Communication Equipment
Schedule No. 6a: Type Test Charges for Type Tests to be conducted abroad
Schedule No. 6b: Type Test Charges for Type Tests to be conducted in Employer’s Country
Schedule No. 7: Taxes and Duties
Schedule No. 8: Grand Summary
Schedule No. 9: Recommended/Optional Spare Parts
Bidding Document for Substation Package-2 for 220/132/33kV Chilime Hub GIS Single-Stage: Two-Envelope
new substation (Part-I) and 220(Hybrid)/132/33kV
Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System
Project
Specification No. Schedule-1 Page 1 of 145
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli Transmission System Project
1 2 3 4 5 6 7 8 9=6x8
Sl. No. Item Description Country of Type & Unit Quantity Currency Unit CIP Entry Border Point / Total CIP Entry Border Point
Origin Designation (As per ITB CIF Port of Entry Price (^), as / CIF Port of Entry Price (^),
19.1) applicable as applicable
B) LT Transformer
a) 630KVA, 33/0.400 kV Nos. 2
C 245 KV EQUIPMENTS
C1 245KV GIS Equipment
1.1 245kV, SF6 GIS Bus Bars Module as per section project
a) OPTION-I
1600A, 40kA for 1 sec. Single Phase Nos. 9
b) OPTION-II
1600A, 40kA, 1sec three phase Nos. 3
Note : Bidder is required to quote for either option-I or
Option-II
D 145kV Equipment
D.1 145KV GIS Equipment
1.1 145kV, SF6 GIS Bus Bars Module as per section project
E 72.5kV EQUIPMENT
1.1 72.5 kV, 1250A, 25kA Circuit Breaker (3-phase) with No. 1
support structure
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3- No. 1
phase, DBR type)
1.3 72.5kV, 50A, 25 kA with 120% extended rating CT (1- Nos. 3
phase)
1.4 72.5kV PT (1-phase) Nos. 3
1.5 72.5 kV BPI (1-phase) Nos. 6
F 33kV Equipments
1.1 33 kV, 630A, 25kA Isolators with out earth switch (3- No. 1
phase, DBR type)
1.2 30 kV Surge Arrestors (1-phase) Nos. 3
1.3 36 kV BPI (1-phase) Nos. 3
1.4 36 kV HG Fuse along with support insulator (1-phase) Nos. 3
J SUBSTATION AUTOMATION
Substation Automation System as per Technical
1
Specification:
a) 220kV System (Nos. of bays) Nos. 6
b) 132 kV System (Nos. of bays) Nos. 9
c) BCU for auxilary system set 1
d) 33 kV HT Indoor Switchgear set 1
K Digital Protection Coupler& PBAX
a) Digital Protection Coupler* Nos 2
b) PBAX with following configuration as per TS Set 1
i 2 wire subscriber interface card with capacity 32 local
subscribers (along with 32 nos. Instruments)
ii) E-1 interface with 2 trunks G-703
iii) 2 wire interface with 1 trunk (For PSTN)
*Digital Protection coupler for 220kV Chilime Hub -
Trishuli-3B D/c Line have been considered at respective
substation end.
L LT Switchgear (As per Technical specification)
a 400V Main switchboard Set 1
b 400V ACDB Set 1
c 400V MLDB Set 1
d 400V Emergency LDB Set 1
e 220V DCDB Sets 2
g 48V DCDB Set 2
M Batteries
a 220V
i 800 AH Nos 2
b 48V
i 600AH Nos 2
R Air conditioning
High wall type split AC unit of 2 TR capacities for control
1 Nos. 25
room, relay room and battery room
3 33 KV
3.1 Line Bay Set 2
3.1 Transformer Bay Set 1
3.3 LT Transformer Bay Set 1
D Illumination System
1.1 Substation Lighting
Control Room cum administrative building illumination
(i) LS 1
(1000 sqmm)
(ii) 220kV GIS Building (620 sqmm) LS 1
G
Visual Monitoring System for watch & ward as per LS 1
technical specification
I SUBSTATION AUTOMATION
a Integration of all 220/132kV Bays under present scope LS 1
with the SCADA of SIEMENS (SINAUT Spectrum) at Load
Dispatch Centre, Kathmandu including supply of
Hardware, Software, accessories etc. as per TS Section
Project.
SUB TOTAL PART-B
1.1 SF6 gas Pressure Relief Devices, 1Nos. of each type Set 1
1.2 SF6 Pressure gauge cum switch OR Density monitors and
pressure switch as applicable (1 no. of each type) Set 1
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
2.7 Trip coil assembly (including valve, if applicable) Set 1
2.8 Auxiliary switch assembly of each type Set 1
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock for
one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch (1 No. of each type and rating)
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock for
one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch(1 No. of each type and rating)
(VII) LT Transformer
i) Bushing (1 no. of each type) Set 1
ii) OTI & WTI with sensing device (1 no. of each type) Set 1
iii) Diaphragm for pressure relief vent No. 1
iv) Silica Gel container No. 1
v) Set of valves Set 1
vi) Buchholz realy (if applicable) No. 1
SUB-TOTAL-C
Total for 220/132/33kV Chilime Hub GIS new
Substation (Package-2, Part-I) (I) (Part-A+ Part-B+ Part
C)
B LT TRANSFORMER
1.0 630 kVA, 33/0.400kV Nos 2
C 245 KV EQUIPMENTS
C.1 245KV GIS HYBRID Equipment
1.1 245kV, SF6 GIS Hybrid Bus Coupler bay Module as per
section project
a) 3000A, 40kA for 1 sec Set 1
1.2 245kV, SF6 GIS Hybrid Bus Transfer Bus Coupler bay
Module as per section project
a) 3000A, 40kA for 1 sec Set 1
1.3 245kV, SF6 GIS Hybrid Line feeder bay Module as per
section project
a) 1600A, 40kA for 1 sec Set 6
1.4 245kV, SF6 GIS Hybrid ICT feeder bay Module as per
section project
a) 1600A, 40kA for 1 sec Set 2
D 145 kV Equipment
1.0 145 kV Circuit Breakers (3-Phase) with support structure
a 1250A, 40kA Nos 7
b 2000A, 40kA Nos 1
E 33 kV Equipment
1.0 36kV Circuit Breakers (3-Phase) with support structure
a 1250A, 25kA Nos 5
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3-phase, DBR No. 1
type)
ii Line Protection Panel housing two nos. Current Differential Protection Nos. 1
relays & accessories at Matatirtha End
iii Line Protection Panel housing two nos. Current Differential Protection Nos. 1
relays & accessories at Upper Trishuli-1 End
c Transformer Protection Panel (For both HV & MV side) Nos. 2
d Bus Bar Protection Panel Set 1
2.0 132 kV
a Circuit Breaker Relay Panel
i With Auto Reclose Nos. 4
ii With out Auto Reclose Nos. 4
b Line Protection Panel
i) Line Protection Panel with Current Differential Protection and Back up Nos. 4
O/C & E/F Protection at Trishuli-3B Hub End
ii) Line Protection Panel housing two nos. Current Differential Protection Nos. 1
relays & accessories at Trishuli-3A HPP End
iii) Line Protection Panel housing two nos. Current Differential Protection Nos. 1
relays & accessories at Trishuli-3B HPP End
K Batteries
a 220V
i 600 AH Nos 2
b 48V
i 600AH Nos 2
O.1 Cables along with clamps, glands, lugs and straight joints etc.
a) 132kV, XLPE insulated , 1C X 1600 sqmm size copper cable as per kM 1.5
technical specificaion.(Metallic sheath and PE outer sheathed with
graphite coating and short circuit current 40kA for 1 sec) including one
spare cable
b) Cable termination as per technical specification for interconnection Nos 12
with overhead transmission for cable at sl. No. 1 above (excluding
terminating structure)
c) Single phase earth link box Nos 12
d) 36kV grade 1Cx300 Sqmm Earth Continuity Cable kM 0.4
R.1
Communication equipments for Trishuli-3B Hub Substation
1.0 Telecom Equipments
SDH Equipment (STM-4 MADM upto 5 MSP protected
A1
directions)
(i) Base Equipment (Common cards, Cross Connect/control cards,
optical base cards, power supply cards, power cabling, other
Nos. 2
hardware and accessories including sub racks, patch cord, DDF etc
fully equiped excluding (ii) & (iii) below
Sub-Total Part-A
A Erection Hardware
d Erection Hardware etc for 72.5kV & 33kV equipments & LT Set 1
Transformer connection
c.1 Transformer
i 53.33MVA , 220/132/33 KV, 1-phase Autotransformer Set 7
i 50MVA , 132/33 KV, 3-phase Power Transformer Set 1
C Illumination System
a Fire fighting building illumination (100 sqmm) LS 1
b Illumination System for switchyard panel room
i 220KV Set 4
ii 132KV Set 3
iii 33kV Set 1
c Control room cum administrative building illumination (1000 sqmm) LS 1
d Switchyard lighting LS 1
e Street lighting LS 1
h Transit camp (420 sqmm) LS 1
j Security room (10 sqmm) LS 1
k Car parking shed (for 10 cars) LS 2
Sub-Total Part-B
a) Bushing of each rating with metal parts & gaskets and Set 1
lifting tools
b) Cooler fan with Motor No. 1
c) Buchholz Relay(Main Tank) complete with floats and Set 1
contacts
d) Local and Remote WTI with sensing device and Set 1
contact(each)
e) Magnetic oil level gauge No. 1
f) Strarters, contactors,switches & Relays for Electrical Set 1
control panels(One ste of each type)
g) Remote Tap postion Indiactor No. 1
h) Spare insulating oil to be handed over to Owner after KL 5
commisioning for O&M requirement
1.11 SF6 to air bushing (220kV - 1 No. of each type & rating) as
Set 1
applicable
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable . Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
2.7 Trip coil assembly (including valve, if applicable) Set 1
2.8 Auxiliary switch assembly of each type Set 1
3 245KV ISOLATORS :
3.1 Complete set of 3-phase dis-connector including main
Set 1
circuit, enclosure, driving mechanism
3.2 3-phase Earthing switch including main circuit, enclosure,
Set 1
driving mechanism.
3.3 Copper contact fingers for dis-connector male & female
contact for dis-connector of each type and rating Set 1
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock for
one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch (1 No. of each type and rating)
iii) Open/Close contactor assembly, timers, key interlock push button Set 1
switch & auxilliary switches (for one pole of Isolator)
iv) Limit Switch Nos. 2
v) Terminal Pads & Connectors Nos. 3
vi) Corona shield rings Nos. 3
(VI) 72.5 kV Isolator
i) One complete pole including support Insulator, MANUAL operating
mechanism with box but excluding structure
1250A, 25kA, 1 E/S (no. of pole) No. 1
ii) Copper contact fingers for male & female contacts ( for one pole of Set 2
Isolator)
iii) Open/Close contactor assembly, timers, key interlock push button Set 1
switch & auxilliary switches (for one pole of Isolator)
iv) Limit Switch Nos. 2
v) Terminal Pads & Connectors Nos. 3
(VIII) 72.5kV, 1250A, 31.5 kA with 120% extended rating CT (1-phase) No. 1
(XI) 216 SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XII) 120kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XIII) 30kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XVI) SAS
i) Bay Control Unit (IED) of each type Set 1
ii) Ethernet Switch of each type Set 1
SUB-TOTAL-C
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli Transmission System Project
Plant and Equipment including mandatory Spares to be supplied from within Employer's Country
1 2 3 4 5 6 7 8 9=6x8 10
Sl. No. Item Description Country of Origin Type & Unit Quantity Currency Unit ExW Price Total ExW Price Mode of Transaction
Designation (As per ITB (Direct/ Bought-Out)
19.1)
B) LT Transformer
a) 630KVA, 33/0.400 kV Nos. 2
C 245 KV EQUIPMENTS
D 145kV Equipment
E 72.5kV EQUIPMENT
1.1 72.5 kV, 1250A, 25kA Circuit Breaker (3-phase) with No. 1
support structure
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3- No. 1
phase, DBR type)
1.3 72.5kV, 50A, 25 kA with 120% extended rating CT (1- Nos. 3
phase)
1.4 72.5kV PT (1-phase) Nos. 3
1.5 72.5 kV BPI (1-phase) Nos. 6
F 33kV Equipments
1.1 33 kV, 630A, 25kA Isolators with out earth switch (3- No. 1
phase, DBR type)
1.2 30 kV Surge Arrestors (1-phase) Nos. 3
1.3 36 kV BPI (1-phase) Nos. 3
1.4 36 kV HG Fuse along with support insulator (1-phase) Nos. 3
J SUBSTATION AUTOMATION
Substation Automation System as per Technical
1
Specification:
a) 220kV System (Nos. of bays) Nos. 6
b) 132 kV System (Nos. of bays) Nos. 9
c) BCU for auxilary system set 1
d) 33 kV HT Indoor Switchgear set 1
K Digital Protection Coupler& PBAX
a) Digital Protection Coupler* Nos 2
b) PBAX with following configuration as per TS Set 1
i 2 wire subscriber interface card with capacity 32 local
subscribers (along with 32 nos. Instruments)
ii) E-1 interface with 2 trunks G-703
iii) 2 wire interface with 1 trunk (For PSTN)
*Digital Protection coupler for 220kV Chilime Hub - Trishuli-
3B D/c Line have been considered at respective substation
end.
L LT Switchgear (As per Technical specification)
a 400V Main switchboard Set 1
b 400V ACDB Set 1
c 400V MLDB Set 1
d 400V Emergency LDB Set 1
e 220V DCDB Sets 2
g 48V DCDB Set 2
M Batteries
a 220V
i 800 AH Nos 2
b 48V
i 600AH Nos 2
R Air conditioning
High wall type split AC unit of 2 TR capacities for control
1 Nos. 25
room, relay room and battery room
2.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
3 33 KV
3.1 Line Bay Set 2
3.1 Transformer Bay Set 1
3.3 LT Transformer Bay Set 1
D Illumination System
1.1 Substation Lighting
Control Room cum administrative building illumination
(i) LS 1
(1000 sqmm)
(ii) 220kV GIS Building (620 sqmm) LS 1
(iii) 132kV GIS Building (350 sqmm) LS 1
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable . Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
2.7 Trip coil assembly (including valve, if applicable) Set 1
2.8 Auxiliary switch assembly of each type Set 1
2.B 145KV SF6 CIRCUIT BREAKER:
2.1 Complete Circuit Breaker pole of each type & rating
complete with interrupter, main circuit enclosure and
No. 1
Marshalling Box with operating mechanism
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
2.7 Trip coil assembly (including valve, if applicable) Set 1
2.8 Auxiliary switch assembly of each type Set 1
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock
for one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch (1 No. of each type and rating)
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock
for one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch(1 No. of each type and rating)
(VII) LT Transformer
i) Bushing (1 no. of each type) Set 1
OTI & WTI with sensing device (1 no. of each type)
Set 1
ii)
iii) Diaphragm for pressure relief vent No. 1
iv) Silica Gel container No. 1
v) Set of valves Set 1
vi) Buchholz realy (if applicable) No. 1
SUB-TOTAL-C
Total for 220/132/33kV Chilime Hub GIS new
Substation (Package-2, Part-I) (I) (Part-A+ Part-B+ Part
C)
c) No 2
33kV Current transformer (NCT) for autotrasnformer
B LT TRANSFORMER
1.0 630 kVA, 33/0.400kV Nos 2
C 245 KV EQUIPMENTS
C.1 245KV GIS HYBRID Equipment
1.1 245kV, SF6 GIS Hybrid Bus Coupler bay Module as per
section project
a) 3000A, 40kA for 1 sec Set 1
1.2 245kV, SF6 GIS Hybrid Bus Transfer Bus Coupler bay
Module as per section project
a) 3000A, 40kA for 1 sec Set 1
1.3 245kV, SF6 GIS Hybrid Line feeder bay Module as per
section project
a) 1600A, 40kA for 1 sec Set 6
1.4 245kV, SF6 GIS Hybrid ICT feeder bay Module as per
section project
D 145 kV Equipment
1.0 145 kV Circuit Breakers (3-Phase) with support structure
a 1250A, 40kA Nos 7
b 2000A, 40kA Nos 1
E 33 kV Equipment
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3-phase, DBR type) No. 1
2.0 132 kV
a Circuit Breaker Relay Panel
i With Auto Reclose Nos. 4
ii With out Auto Reclose Nos. 4
K Batteries
a 220V
i 600 AH Nos 2
b 48V
i 600AH Nos 2
O.1 Cables along with clamps, glands, lugs and straight joints etc.
R.1
Communication equipments for Trishuli-3B Hub Substation
1.0 Telecom Equipments
A1
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical
base cards, power supply cards, power cabling, other hardware and
accessories including sub racks, patch cord, DDF etc fully equiped Nos. 2
excluding (ii) & (iii) below
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
Sub-Total Part-A
A Erection Hardware
c Set 1
For spare unit of 220/132/33kV auto transformer connection through
auxiliary buses, Neutral formation and delta formation (for two banks):
Required 245 kV BPI for HV auxiliary bus, 132 kV BPI for 132 kV
Auxilary bus, 72.5 kV BPI for tertiary auxilary bus & delta formation, 36
kV BPI for Neutral formation & Neutral auxiliary bus including Al tube,
bus-bar materials, clamps, spacers, connectors, including equipment
connectors, support structures, Earthing of spare unit as per technical
specification.
d Erection Hardware etc for 72.5kV & 33kV equipments & LT Set 1
Transformer connection
c.1 Transformer
i 53.33MVA , 220/132/33 KV, 1-phase Autotransformer Set 7
i 50MVA , 132/33 KV, 3-phase Power Transformer Set 1
C Illumination System
a Fire fighting building illumination (100 sqmm) LS 1
b Illumination System for switchyard panel room
i 220KV Set 4
ii 132KV Set 3
iii 33kV Set 1
c Control room cum administrative building illumination (1000 sqmm) LS 1
d Switchyard lighting LS 1
e Street lighting LS 1
h Transit camp (420 sqmm) LS 1
j Security room (10 sqmm) LS 1
k Car parking shed (for 10 cars) LS 2
Sub-Total Part-B
1.11 SF6 to air bushing (220kV - 1 No. of each type & rating)
Set 1
as applicable
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable . Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
3 245KV ISOLATORS :
3.1 Complete set of 3-phase dis-connector including main
Set 1
circuit, enclosure, driving mechanism
3.2 3-phase Earthing switch including main circuit, enclosure,
Set 1
driving mechanism.
3.3 Copper contact fingers for dis-connector male & female
contact for dis-connector of each type and rating Set 1
3.4 Copper contact fingers for earthing switch male & female
contacts, for one complete earthing switch of each type Set 1
and rating
3.5 Open / Close contactor assembly, timers, key interlock
for one complete (3 phase) dis-connector and (3 phase)
Set 1
earthing switch (1 No. of each type and rating)
ii) Rubber gaskets, `O' rings and seals ( for complete replacement of one Set 1
pole of CB)
iii) Trip coils with resistor Nos. 2
iv) Closing coils with resistor Nos. 1
v) Terminal Pads & connectors Nos. 2
vi) Molecular filter Nos. 2
vii) Relays, Power contactors, switch fuse units, limit switches, push Set 1
buttons, timers & MCB etc. (1 no. of each type)
viii) Pressure switches / Density monitor (1 no. of each type) Set 1
ix) Auxiliary switch assembly (for one pole of CB) Set 1
(IV) 245kV Isolator
i) One complete pole including support Insulator, motor operating
mechanism (MOM) with box but excluding structure
1600A, 40 KA, 1 E/S (no. of pole) No. 1
ii) Copper contact fingers for male & female contacts ( for one pole of Set 2
Isolator)
iii) Open/Close contactor assembly, timers, key interlock push button Set 1
switch & auxilliary switches (for one pole of Isolator)
iv) Limit Switch Nos. 2
v) Terminal Pads & Connectors Nos. 3
vi) Corona shield rings Nos. 3
(V) 145kV Isolator
i) One complete pole including support Insulator, motor operating
mechanism (MOM) with box but excluding structure
1250A, 31.5kA with1 E/S (no. of pole) No. 1
ii) Copper contact fingers for male & female contacts ( for one pole of Set 2
Isolator)
iii) Open/Close contactor assembly, timers, key interlock push button Set 1
switch & auxilliary switches (for one pole of Isolator)
iv) Limit Switch Nos. 2
v) Terminal Pads & Connectors Nos. 3
vi) Corona shield rings Nos. 3
(VI) 72.5 kV Isolator
i) One complete pole including support Insulator, MANUAL operating
mechanism with box but excluding structure
1250A, 25kA, 1 E/S (no. of pole) No. 1
ii) Copper contact fingers for male & female contacts ( for one pole of Set 2
Isolator)
iii) Open/Close contactor assembly, timers, key interlock push button Set 1
switch & auxilliary switches (for one pole of Isolator)
iv) Limit Switch Nos. 2
v) Terminal Pads & Connectors Nos. 3
(VIII) 72.5kV, 1250A, 31.5 kA with 120% extended rating CT (1-phase) No. 1
(XI) 216 SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XII) 120kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XIII) 30kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XVI) SAS
i) Bay Control Unit (IED) of each type Set 1
ii) Ethernet Switch of each type Set 1
A
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Common cards, Cross-connect/control cards, Optical base card, Power
supply cards, power cabling, other hardware & accessories (each). Set 1
A
SDH Equipment (STM-4 MADM upto 3 MSP protected directions)
(i) Common cards, Cross-connect/control cards, Optical base card, Power
supply cards, power cabling, other hardware & accessories (each). Set 1
SUB-TOTAL-C
Total for 220/132/33kV Trishuli Hub AIS new Substation
(Package-2, Part-II) (II) (Part-A+ Part-B+ Part C)
Total of Schedule-2
Date: Signature:
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli Transmission System Project
Local Transportation, Insurance and other incidental services (including port clearance etc.) applicable for supply of Plant & Equipment.
1 2 3 4 5 6 7 8=6x7
Sl. No. Item Description Country of Origin Type & Unit Quantity Unit Price Total Price
Designation (NPR) (NPR)
B) LT Transformer
a) 630KVA, 33/0.400 kV Nos. 2
C 245 KV EQUIPMENTS
C1 245KV GIS Equipment
1.1 245kV, SF6 GIS Bus Bars Module as per section project
D 145kV Equipment
D.1 145KV GIS Equipment
1.1 145kV, SF6 GIS Bus Bars Module as per section project
E 72.5kV EQUIPMENT
1.1 72.5 kV, 1250A, 25kA Circuit Breaker (3-phase) with No. 1
support structure
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3- No. 1
phase, DBR type)
1.3 72.5kV, 50A, 25 kA with 120% extended rating CT (1- Nos. 3
phase)
1.4 72.5kV PT (1-phase) Nos. 3
1.5 72.5 kV BPI (1-phase) Nos. 6
F 33kV Equipments
1.1 33 kV, 630A, 25kA Isolators with out earth switch (3- No. 1
phase, DBR type)
1.2 30 kV Surge Arrestors (1-phase) Nos. 3
1.3 36 kV BPI (1-phase) Nos. 3
1.4 36 kV HG Fuse along with support insulator (1-phase) Nos. 3
J SUBSTATION AUTOMATION
Substation Automation System as per Technical
1
Specification:
a) 220kV System (Nos. of bays) Nos. 6
b) 132 kV System (Nos. of bays) Nos. 9
c) BCU for auxilary system set 1
d) 33 kV HT Indoor Switchgear set 1
K Digital Protection Coupler& PBAX
a) Digital Protection Coupler* Nos 2
b) PBAX with following configuration as per TS Set 1
i 2 wire subscriber interface card with capacity 32 local
subscribers (along with 32 nos. Instruments)
ii) E-1 interface with 2 trunks G-703
iii) 2 wire interface with 1 trunk (For PSTN)
*Digital Protection coupler for 220kV Chilime Hub -
Trishuli-3B D/c Line have been considered at respective
substation end.
M Batteries
a 220V
i 800 AH Nos 2
b 48V
i 600AH Nos 2
R Air conditioning
High wall type split AC unit of 2 TR capacities for control Nos. 25
1
room, relay room and battery room
A1
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical
base cards, power supply cards, power cabling, other hardware and
accessories including sub racks, patch cord, DDF etc fully equiped Nos. 1
excluding (ii) & (iii) below
2.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
1
220 kV DM-type layout for GIS termination
arrangement
1.1 Line Bay Set 3
1.2 Transformer Bay Sets 2
3 33 KV
3.1 Line Bay Set 2
3.1 Transformer Bay Set 1
3.3 LT Transformer Bay Set 1
D Illumination System
1.1 Substation Lighting
Control Room cum administrative building illumination LS 1
(i)
(1000 sqmm)
(ii) 220kV GIS Building (620 sqmm) LS 1
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
(VII) LT Transformer
i) Bushing (1 no. of each type) Set 1
OTI & WTI with sensing device (1 no. of each type)
Set 1
ii)
iii) Diaphragm for pressure relief vent No. 1
iv) Silica Gel container No. 1
v) Set of valves Set 1
vi) Buchholz realy (if applicable) No. 1
A
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Common cards, Cross-connect/control cards, Optical base card, Power
supply cards, power cabling, other hardware & accessories (each). Set 1
SUB-TOTAL-C
Total for 220/132/33kV Chilime Hub GIS new
Substation (Package-2, Part-I) (I) (Part-A+ Part-B+
Part C)
B LT TRANSFORMER
1.0 630 kVA, 33/0.400kV Nos 2
C 245 KV EQUIPMENTS
C.1 245KV GIS HYBRID Equipment
1.1 245kV, SF6 GIS Hybrid Bus Coupler bay Module as per
section project
a) 3000A, 40kA for 1 sec Set 1
1.2 245kV, SF6 GIS Hybrid Bus Transfer Bus Coupler bay
Module as per section project
a) 3000A, 40kA for 1 sec Set 1
1.3 245kV, SF6 GIS Hybrid Line feeder bay Module as per
section project
a) 1600A, 40kA for 1 sec Set 6
1.4 245kV, SF6 GIS Hybrid ICT feeder bay Module as per
section project
a) 1600A, 40kA for 1 sec Set 2
D 145 kV Equipment
1.0 145 kV Circuit Breakers (3-Phase) with support structure
a 1250A, 40kA Nos 7
b 2000A, 40kA Nos 1
6.0 145 kV Bust Post Insulator (Except auxiliary buses of transformer) Nos 42
E 33 kV Equipment
1.0 36kV Circuit Breakers (3-Phase) with support structure
a 1250A, 25kA Nos 5
F 72.5kV EQUIPMENT
1.1 72.5 kV, 1250A, 25kA Circuit Breaker (3-phase) with support structure No. 1
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3-phase, DBR type) No. 1
2.0 132 kV
* Digital protection Coupler for both ends for all 220kV Lines are
considered. However, Digital Protection coupler for 220kV Chilime Hub
- Trishuli-3B D/c Line have been considered at respective substation
end.
K Batteries
a 220V
i 600 AH Nos 2
b 48V
i 600AH Nos 2
O.1 Cables along with clamps, glands, lugs and straight joints etc.
i 3.5Cx300 sqmm (XLPE) cable for filter Machine along with termination KM 1
arrangement as per TS
a) 132kV, XLPE insulated , 1C X 1600 sqmm size copper cable as per kM 1.5
technical specificaion.(Metallic sheath and PE outer sheathed with
graphite coating and short circuit current 40kA for 1 sec) including one
spare cable
b) Cable termination as per technical specification for interconnection with Nos 12
overhead transmission for cable at sl. No. 1 above (excluding
terminating structure)
c) Single phase earth link box Nos 12
d) 36kV grade 1Cx300 Sqmm Earth Continuity Cable kM 0.4
R.1
Communication equipments for Trishuli-3B Hub Substation
1.0 Telecom Equipments
A1
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical
base cards, power supply cards, power cabling, other hardware and
accessories including sub racks, patch cord, DDF etc fully equiped Nos. 2
excluding (ii) & (iii) below
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
A1
SDH Equipment (STM-4 MADM upto 3 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical
base cards, power supply cards, power cabling, other hardware and
accessories including sub racks, patch cord, DDF etc fully equiped Nos. 1
excluding (ii) & (iii) below
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
Sub-Total Part-A
A Erection Hardware
d Erection Hardware etc for 72.5kV & 33kV equipments & LT Set 1
Transformer connection
c.1 Transformer
i 53.33MVA , 220/132/33 KV, 1-phase Autotransformer Set 7
i 50MVA , 132/33 KV, 3-phase Power Transformer Set 1
C Illumination System
a Fire fighting building illumination (100 sqmm) LS 1
b Illumination System for switchyard panel room
i 220KV Set 4
ii 132KV Set 3
iii 33kV Set 1
c Control room cum administrative building illumination (1000 sqmm) LS 1
d Switchyard lighting LS 1
e Street lighting LS 1
h Transit camp (420 sqmm) LS 1
j Security room (10 sqmm) LS 1
k Car parking shed (for 10 cars) LS 2
Sub-Total Part-B
1.11 SF6 to air bushing (220kV - 1 No. of each type & rating)
Set 1
as applicable
2.2 Rubber gaskets, `O' rings and seals for SF6 gas (1 No. of
Set 1
each type)
2.3 Trip coil assembly with resistor as applicable Set 1
2.4 Closing coil assembly with resistor as applicable . Set 1
2.5 Relays, Power contactors, push buttons, timers & MCBs
Set 1
etc (1 No. of each type & rating)
2.6 Closing coil assembly (including valve, if applicable)
Set 1
3 245KV ISOLATORS :
3.1 Complete set of 3-phase dis-connector including main
Set 1
circuit, enclosure, driving mechanism
3.2 3-phase Earthing switch including main circuit,
Set 1
enclosure, driving mechanism.
3.3 Copper contact fingers for dis-connector male & female
contact for dis-connector of each type and rating Set 1
(VIII) 72.5kV, 1250A, 31.5 kA with 120% extended rating CT (1-phase) No. 1
(XI) 216 SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XII) 120kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XIII) 30kV SA
i) Complete LA (1-phase) No. 1
ii) Surge counter/monitor Nos. 5
(XVI) SAS
i) Bay Control Unit (IED) of each type Set 1
ii) Ethernet Switch of each type Set 1
A
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
A
SDH Equipment (STM-4 MADM upto 3 MSP protected directions)
(i) Common cards, Cross-connect/control cards, Optical base card, Power
supply cards, power cabling, other hardware & accessories (each). Set 1
SUB-TOTAL-C
Total for 220/132/33kV Trishuli Hub AIS new
Substation (Package-2, Part-II) (II) (Part-A+ Part-B+
Part C)
Total of Schedule-1
Date: Signature:
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli Transmission System Project
Installation Charges
1 2 3 4 5 6 7 8 9=6x8 10 11 = 6 x 10
Sl. No. Item Description Country of Origin Type & Unit Quantity Portion in Foreign Currency Portion in Local Currency
Designation Currency (As Unit Charges Total Charges Unit Price Total Price
per ITB 19.1) (NPR) (NPR)
B) LT Transformer
a) 630KVA, 33/0.400 kV Nos. 2
C 245 KV EQUIPMENTS
C1 245KV GIS Equipment
1.1 245kV, SF6 GIS Bus Bars Module as per section project
a) OPTION-I
1600A, 40kA for 1 sec. Single Phase Mtr. 225
b) OPTION-II
1600A, 40kA, 1sec three phase Mtr. 75
Note : Bidder is required to quote for either option-I or Option-
II
1.9 220kV, SF6 to Air Bushing alongwith associated support
structure (for Transformer bays)
a) 1600A, 40kA for 1 sec. Single Phase Nos. 7
1.10 220kV, SF6 to Air Bushing alongwith associated support
structure (for line bays)
a) OPTION-I
1600A, 40kA for 1 sec. Single Phase Nos. 9
b) OPTION-II
1600A, 40kA, 1sec three phase Nos. 3
Note : Bidder is required to quote for either option-I or Option-II
D 145kV Equipment
D.1 145KV GIS Equipment
1.1 145kV, SF6 GIS Bus Bars Module as per section project
E 72.5kV EQUIPMENT
1.1 72.5 kV, 1250A, 25kA Circuit Breaker (3-phase) with support No. 1
structure
1.2 72.5 kV, 1250A, 25kA Isolators with earth switch (3-phase, No. 1
DBR type)
F 33kV Equipments
1.1 33 kV, 630A, 25kA Isolators with out earth switch (3-phase, No. 1
DBR type)
1.2 30 kV Surge Arrestors (1-phase) Nos. 3
1.3 36 kV BPI Nos. 3
1.4 36 kV HG Fuse along with support insulator (1-phase) Nos. 3
J SUBSTATION AUTOMATION
Substation Automation System as per Technical Specification:
1
M Batteries
a 220V
i 800 AH Nos 2
b 48V
i 600AH Nos 2
R Air conditioning
High wall type split AC unit of 2 TR capacities for control
1 Nos. 25
room, relay room and battery room
A1
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical base
cards, power supply cards, power cabling, other hardware and accessories
including sub racks, patch cord, DDF etc fully equiped excluding (ii) & (iii) Nos. 1
below
2.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
3 33 KV
3.1 Line Bay Set 2
3.1 Transformer Bay Set 1
3.3 LT Transformer Bay Set 1
D Illumination System
1.1 Substation Lighting 0 0
Control Room cum administrative building illumination (1000
(i) LS 1
sqmm)
(ii) 220kV GIS Building (620 sqmm) LS 1
Control Room Building (Double Storey with plinth area of 500 sq.m.
vi) Sq. M. 1000
on each floor)
vii) Parking Shed (for 10 Cars) LS 2
12.0 PRE ENGINEERED BUILDINGS
i) 220 KV GIS HALL
All Civil works including finishing, internal cable trench, etc.
complete as per technical specification and approved drawings,
excluding excavation, PCC, RCC and reinforcement steel which shall
be measured and paid seperately under respective items of BPS.
Construction of rail cum road as per drawing including all items such
14.0 as excavation, compaction, rolling, watering, WBM etc but excluding
concrete, reinforcement and structural steel.
a) Section having two rails Sq.M. 240
Chain link fencing as per technical sepcification and approved
15.0 RM 320
drawing excluding concrete
16.0 Switchyard Gate excluding Concrete Nos. 2
Septic tank and soak pit (for 50 users) complete as per technical
specification and approved drawing excluding concrete &
17.0 reinforcment which shall be measured and paid seperately under
respective items of BPS .
a) Control room Building (for 20 users) LS 1
b) Quarters & Transit Camp (for 50 users) LS 2
c) Security Room (for 10 users) LS 1
Supplying & laying hume pipe of grade (NP-3) excluding concrete
18.0
and reinforcement
a) 250mm dia RM 100
SUB-TOTAL-C
Total for 220/132/33kV Chilime Hub GIS new Substation
(Package-2, Part-I) (I) (Part-A+ Part-B)
A POWER TRANSFORMER
A.1 1-Ph Autotransformers
a) 53.33MVA, 220/√3 / 132/√3 / 33kV Single Phase Auto Nos. 7
Transformer (without transformer Oil)
b) Insulating oil for 53.33MVA , 220/132/33 KV, 1-phase Lot* 7
Autotransformer (* 1Lot = Oil for 1 Autotransformer )
c) 33kV Current transformer (NCT) for autotrasnformer No 2
B LT TRANSFORMER
1.0 630 kVA, 33/0.400kV Nos 2
C 245 KV EQUIPMENTS
C.1 245KV GIS HYBRID Equipment
1.1 245kV, SF6 GIS Hybrid Bus Coupler bay Module as per
section project
a) 3000A, 40kA for 1 sec Set 1
1.2 245kV, SF6 GIS Hybrid Bus Transfer Bus Coupler bay Module
as per section project
a) 3000A, 40kA for 1 sec Set 1
1.3 245kV, SF6 GIS Hybrid Line feeder bay Module as per section
project
a) 1600A, 40kA for 1 sec Set 6
1.4 245kV, SF6 GIS Hybrid ICT feeder bay Module as per section
project
a) 1600A, 40kA for 1 sec Set 2
D 145 kV Equipment
1.0 145 kV Circuit Breakers (3-Phase) with support structure
a 1250A, 40kA Nos 7
b 2000A, 40kA Nos 1
E 33 kV Equipment
1.0 36kV Circuit Breakers (3-Phase) with support structure
a 1250A, 25kA Nos 5
2.0 132 kV
K Batteries
a 220V
i 600 AH Nos 2
b 48V
i 600AH Nos 2
O.1 Cables along with clamps, glands, lugs and straight joints etc.
e) Laying & Jointing etc for 4 nos,1C, 1600 sqmm size cables alongwith Route 0.4
all necessary installation material as per technical specification kM
f) Construction of buried cable trench for 132kV XLPE Cable including M 400
road crossing: All civil works alongwith back filling, restoration etc (as per
specification) including excavation, PCC, sand filling, PVC warning
tapes, RCC hume pipe(NP3) of suiatable diameter along with collars &
jointings etc required to complete buried cable trench shall be deemed
to be included in the item of work.
A1
SDH Equipment (STM-4 MADM upto 5 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical base
cards, power supply cards, power cabling, other hardware and accessories
including sub racks, patch cord, DDF etc fully equiped excluding (ii) & (iii) Nos. 2
below
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
A1
SDH Equipment (STM-4 MADM upto 3 MSP protected directions)
(i) Base Equipment (Common cards, Cross Connect/control cards, optical base
cards, power supply cards, power cabling, other hardware and accessories
including sub racks, patch cord, DDF etc fully equiped excluding (ii) & (iii) Nos. 1
below
3.0
VOIP telephone instrument with one common switch (min. 8 port) Nos. 2
Sub-Total Part-A
A Erection Hardware
c
For spare unit of 220/132/33kV auto transformer connection through Set 1
auxiliary buses, Neutral formation and delta formation (for two banks):
Required 245 kV BPI for HV auxiliary bus, 132 kV BPI for 132 kV
Auxilary bus, 72.5 kV BPI for tertiary auxilary bus & delta formation, 36
kV BPI for Neutral formation & Neutral auxiliary bus including Al tube,
bus-bar materials, clamps, spacers, connectors, including equipment
connectors, support structures , Earthing of spare unit as per technical
specification.
d Erection Hardware etc for 72.5kV & 33kV equipments & LT Transformer Set 1
connection
e
Earthing and lightning protection including necesaary
connectors/connections, risers etc. complete in all respect (but
excluding LM structures for Lightning protection)
i Earth Conductor (copper) LS 1
ii Earth Rod (copper clad steel) LS 1
iii Equipment for lightning protection LS 1
c.1 Transformer
i 53.33MVA , 220/132/33 KV, 1-phase Autotransformer Set 7
i 50MVA , 132/33 KV, 3-phase Power Transformer Set 1
C Illumination System
a Fire fighting building illumination (100 sqmm) LS 1
b Illumination System for switchyard panel room
i 220KV Set 4
ii 132KV Set 3
iii 33kV Set 1
c Control room cum administrative building illumination (1000 sqmm) LS 1
d Switchyard lighting LS 1
e Street lighting LS 1
h Transit camp (420 sqmm) LS 1
j Security room (10 sqmm) LS 1
k Car parking shed (for 10 cars) LS 2
Sub-Total Part-B
2.0 Providing and laying of Plain Cement Concrete (PCC) (1:4:8) Cu.M 2000
3.0 Providing and laying of Plain Cement Concrete (PCC) (1:2:4) Cu.M 215
Providing and laying of Reinforced Cement Concrete Design Mix
4.0 M25 including pre cast, shuttering, Grouting of pockets & Cu.M 10210
underpinning but excluding steel reinforcement
Providing and laying Plain Cement Concrete 1:5:10 (1 cement : 5
5.0 Cu.M 3445
sand : 10 Stone aggregate)
6.0 Steel Reinforcement ( Fe 500) MT 880
7.0 Stone filling (40 mm size) over grating of transformer/ reactor Cu.M 165
foundation
Misc. Structural steel including rails, embedments, edge protection
8.0 angles, gratings etc. but excluding the reinforcement steel and steel MT 220
for lattice and pipe structures.
Stone spreading including antiweed treatment in switchyard excluding
9.0 Sq. M. 45000
PCC
All civil works for following buildings as per technical specification
and approved drawings but excluding excavation, PCC, RCC and
10.0
reinforcement steel (Fe-500), which shall be measured and paid
seperately under respective items of BPS :
i) Auxilliary building (33kV indoor switchgear room) Sq. M. 0
ii) Fire fighting pump house building (excluding external finish) Sq. M. 100
iii) Water Tank (excluding external finish) LS 1
iv) Switchyard Panel Room (SPR) Sq. M. 180
v) Township (Quarters)
a B Type Sq. M. 0
b C Type Sq. M. 0
c D Type Sq. M. 0
vi) Transit Camp Sq. M. 420
Control Room Building (Double Storey with plinth area of 500 sq.m.
vii) Sq. M. 1000
on each floor)
viii) Parking Shed (for 10 Cars) LS 2
11.0 External finish as per specification for following buildings:
i) Auxilliary building (33kV indoor switchgear room) Sq. M. 0
Fire fighting pump house building (excluding external finish)
ii) Sq. M. 100
Construction of rail cum road as per drawing including all items such
13.0 as excavation, compaction, rolling, watering, WBM etc but excluding
concrete, reinforcement and structural steel.
a) Section having two rails Sq.M. 240
Chain link fencing as per technical sepcification and approved
14.0 RM 205
drawing excluding concrete
15.0 Switchyard Gate excluding Concrete Nos. 2
Septic tank and soak pit (for 50 users) complete as per technical
specification and approved drawing excluding concrete &
16.0 LS 3
reinforcment which shall be measured and paid seperately under
respective items of BPS .
a) Control room Building (for 20 users) LS 1
b) Quarters & Transit Camp (for 50 users) LS 2
c) Security Room (for 10 users) LS 1
Supplying & laying hume pipe of grade (NP-3) excluding concrete
17.0
and reinforcement
a) 250mm dia RM 300
b) 300mm dia RM 200
c) 450mm dia RM 100
d) 600mm dia RM 100
e) 900mm dia RM 50
18.0 Supplying and erecting dewatering pumps
a) 5 HP Nos. 2
b) 0.5 HP Nos. 7
19.0 Drains Excluding Concrete
SUB-TOTAL-C
Total for 220/132/33kV Trishuli Hub AIS new Substation
(Package-2, Part-II) (II) (Part-A+ Part-B+ Part C)
Total of Schedule-4
Date: Signature:
Place: Printed
Name:
Designatio
n:
Common
Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli
Transmission System Project
Training Charges for Training to be imparted abroad
Sl. Country Nos. of Training Total Training Charges
No. where Trainee duration in
Description Item for which training is to be imparted training is to days Currency (As Total
be imparted per ITB 19.1) Training
Charges
1 2 3 4 5 6 7 = 4x5 x 6
I 220/132/33kV CHILIME HUB GIS new Substation
(Package-2, Part-I)
i) Control & Protection and Substation 3 2 days
Automation System
Training to Owners personnel on Design , testing
ii) GIS 3 5 days
A and Maintenance aspect as per Section Project,
iii) Telecommunication Equipment (SDH, MUX 3 2 days
Technical Specification at manufacturer's works
& NMS (Craft Terminal)) and PLCC
iv)Transformer 3 2 days
Total for Training Charges (I)
II 220(Hybrid)/132/33kV Trishuli-3B HUB AIS new
Substation (Package-2, Part-II)
i) Control & Protection and Substation 3 3 days
Automation System
ii) GIS Hybrid Switchgear 3 5 days
Training to Owners personnel on Design , testing
iii) Switchyard Equipment (Circuit Breaker, CT, 3 5 days
A and Maintenance aspect as per Section Project,
CVT & LA)
Technical Specification at manufacturer's works
iv) Telecommunication Equipment (SDH, MUX 3 3 days
& NMS (Craft Terminal)) and PLCC
v)Transformer 3 3 days
Total for Training Charges (II)
III Training on Project Administration for key staffs of i) Project Administration 4 5 days
projects in Accounts and Administration (training to
be imparted at Contractor’s Head Quarter in the
country of the Contractor) as per Section Project,
Technical Specification
Total for Training Charges (III)
Date:
Place:
On Job training on operation, maintenance andunder 220kV Chilime-Trishuli Transmission System Project
Package-2
testing & commissioning aspect at one
A
Specification No. Schedule-5b Page 128 of 145
Date: Signature:
Place: Printed
Name:
Designation:
Common
Seal:
NOTE: To and fro charges and accommodation for the Instructor (Trainer) and Training material for the Trainees shall be included in the
prices quoted by the bidder. However, arrangments for trainees and premises for conducting the training shall be arranged by OWNER.
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new
substation (Part-II) under 220kV Chilime-Trishuli Transmission System Project
Maintenance Charges for Communication Equipment
Total Maintenance Charges
Date: Signature:
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli
Transmission System Project
1 2 3 4 5 6 7 8=5x7
Sl. No. Description Testing Unit Qty Currency (As Unit Test Total Test
Location per ITB 19.1) Charges Charges
i) Cold test
ii) Dry heat test
iii) Damp heat, steady state test
iv) Cyclic humidity test
v) Vibration response and seismic test
vi) Final condition check
i) Tests to prove the strength of enclosures. LS 1
o) Seismic test LS 1
ii Resistance test LS 1
v Shrinkage test LS 1
ix Thermal stability LS 1
Date: Signature:
Place: Printed Name:
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli
Transmission System Project
1 2 3 4 5 6 7=4x6
Sl. No. Description Unit Qty Currency (As Unit Test Total Test Charges
per ITB 19.1) Charges
i) Cold test
ii) Dry heat test
iii) Damp heat, steady state test
iv) Cyclic humidity test
v) Vibration response and seismic test
vi) Final condition check
i) Tests to prove the strength of enclosures. LS 1
o) Seismic test LS 1
ii Resistance test LS 1
v Shrinkage test LS 1
ix Thermal stability LS 1
Date: Signature:
Place: Printed Name:
Designation:
Common Seal:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under
220kV Chilime-Trishuli Transmission System Project
Bidder's Address:
Sl. No. Item Nos. Total Price in Foreign Total Price in Local
Currency ( )* Currency( )*
1 ……...(indicate names of various Taxes and Duties in Employer's Country)……..
Total Duty, as applicable:
(a) On Schedule 1 @ rate of …………. on items nos. ……………………
(b) On Schedule 2 @ rate of …………. on items nos. ……………………
……………………………………………………………………………
……………………………………………………………………….
* Specify currency in accordance with ITB Clause 19.1 and corresponding BDS clauses, Vol.I of the Bidding Documents.
Note:
Date:
Place:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV
Chilime-Trishuli Transmission System Project
(GRAND SUMMARY)
Designation: Designation:
Package-2 for 220/132/33kV Chilime Hub GIS new substation (Part-I) and 220(Hybrid)/132/33kV Trishuli-3B Hub AIS new substation (Part-II) under 220kV Chilime-Trishuli
Transmission System Project
Bidder's Address:
Details of Recommended/Optional Spares parts and Recommended Test Equipment (in line with Technical Specifications) is furnished below:
Item No. Name & Description of Name of Original Part No. Number of Units in Total No. of Sets to Unit Price Total Price Remarks
Parts Manufacturer each set be provided
Date: Signature:
Place: Printed Name:
Designation:
Common Seal: