Professional Documents
Culture Documents
Iso 1496-5 1991 Amd 1-1993 PDF
Iso 1496-5 1991 Amd 1-1993 PDF
STANDARD 1496-5
Second edition
1991-12-15
AMENDMENT 1
1993-03-01
Part 5:
Platform and platform-based containers
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
Reference number
ISO 1496-5:1991/Amd.1:1 993 (E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards bodies (ISO member bedies). The work of preparing lnter-
national Standards is normally carried out through ISO technical committees.
Esch member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take
part in the work. ISO collaborates closely with the lnternational Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
0 ISO 1993
All rights reset-ved. No part of this publication may be reproduced or utilized in any form or by
any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Orga nization for Standardization
Case posta Ie 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
ii
Copyright International Organization for Standardization
Provided by IHS under license with ISO Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs
No reproduction or networking permitted without license from IHS Not for Resale, 03/17/2014 21:02:32 MDT
ISO 149695:1991/Amd.l:1993 (E)
Part 5:
“based types designated IAAA, IAA, IA, IAX, IBBB, IBB, IB, IBX,”
Page 2, table 2
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
In the column “Container designation”, replace the first and second lines with the following:
“Fork-Iift pockets shall not be provided on IAAA, IAA, IA, IAX, IBBB, IBB, IB and IBX Containers.”
“Gooseneck tunnels shall be provided as mandatory features in IAAA Containers, and may be provided as optional
features in IAA, IA and IAX Containers.
The base structure of the Containers, if any, shall be in accordance with 5.4.”
Page 6, table 3
In the column “Container designation”, replace the first and second lines with the following:
“Figure B.5 - IAAA, IAA, IA and 1AX Containers with gooseneck tunnel (with minimum localized structure)”
Insert a reference to “IAAA” Containers in the top left-hand drawing and a reference to “IBBB” Containers in the drawing
below.
In item a), replace the second and third lines with the following:
II
- for IAAA, IAA, IA and IAX Containers, N = 16
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---
--``,`,,,````,,,,,,``,`,```,`-`-`,,`,,`,`,,`---