You are on page 1of 60

We are proud to introduce the There are many reasons to keep Looking deeper into what´s new in

third new release 2015! This the software up to date, to the database we find a good
release is named 2016.00. receive the latest vehicle update on Scania for Air dryer,
The database is updated on information available and to get with functionality to read out
totally 18 trucks and bus important functionality for older parameters and to write back to a
brands and 11 light vehicles. new air dryer unit, for year models
commercial brands, for year 2005 to 2015.
models between 1998 and Below you find more detailed
2015. information about the updated
models and new adjustment
functions in 2016.00.

GUIDE

Brand
Model 2004-2007 ● ● ● ● ● ● ●
Adjustments 2004-2006 ● ●
Programmings and tests 2006-2007 ●

Year range in model includes a complete range


Brands and Models are listed as in the CARS and
for all systems with new or updated
TRUCKS software.
functionality.

The OBD functions e.g. Adjustments and Systems with markers are new or updated
programmings that are listed, are new or with read/erase fault codes, real time data
updated for the marked system. and/or activations.
2 (60)

Agrale Bus
MA 7.x 2006-2011 ● ●

MA 8.x 2006-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

MA 9.x 2006-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

MA 10.x 2006-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

MA 12.x 2006-2015 ● ●

MT 12.x 2006-2015 ● ●
Cylinder deactivation 2006-2011 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

MA 15.x 2006-2015 ● ●

MT 15.x 2012-2015 ● ●

Alexander Dennis
Enviro 300 2006-2013 ●
Read data from ECU and save data to file 2006-2013 ●
Write data to ECU from file 2006-2013 ●

Enviro 400 2005-2013 ●


Read data from ECU and save data to file 2005-2013 ●
Write data to ECU from file 2005-2013 ●

Trident 2004-2013 ●
Read data from ECU and save data to file 2004-2013 ●
Write data to ECU from file 2004-2013 ●

Citroën
Jumpy/Dispatch Serie 3 [07-] 2014-2015 ●
Front left wheel learning 2014-2015 ●
Front right wheel learning 2014-2015 ●
Programing of wheel sensor ID 2014-2015 ●
Rear left wheel learning 2014-2015 ●
3 (60)

Rear right wheel learning 2014-2015 ●

Jumper/Relay Serie 3 [06-] 2006-2011 ●


Particulate filter regeneration (only for version with
2006-2011
DPF) ●

DAF
XF 2013-2015 ● ● ● ● ● ● ● ● ●
ABS valve front left 2015 ●
ABS valve front right 2015 ●
Accelerator pedal calibration 2015 ●
Adblue tank heater relay 2013-2015 ●
Cleaned diesel particulate filter installation 2013-2015 ●
Cylinder deactivation 2013-2015 ●
EBS backup function, additional axle 2015 ●
EBS backup function, front axle 2015 ●
EBS backup function, rear axle 2015 ●
EBS trailer control valve, cycle test 2015 ●
EBS-test front axle 2015 ●
EBS-test rear axle 2015 ●
ECU Exchange 2015 ●
Engine brake 2015 ●
Injector programming 2015 ●
Left speaker 2013-2015 ●
Level sensor calibration 2015 ●
Mute 2013-2015 ●
New diesel particulate filter installation 2013-2015 ●
Read service parameters 2015 ●
Relay, preheater 2015 ●
Right speaker 2013-2015 ●
System test while operating 2015 ●
Vehicle preset max speed 2015 ●
Write new service parameters, range/date 2015 ●

CF 2013-2015 ● ● ● ● ● ● ● ● ●
ABS valve front left 2015 ●
ABS valve front right 2015 ●
Accelerator pedal calibration 2015 ●
Adblue tank heater relay 2013-2015 ●
Cleaned diesel particulate filter installation 2013-2015 ●
Cylinder deactivation 2013-2015 ●
EBS backup function, additional axle 2015 ●
EBS backup function, front axle 2015 ●
EBS backup function, rear axle 2015 ●
EBS trailer control valve, cycle test 2015 ●
EBS-test front axle 2015 ●
EBS-test rear axle 2015 ●
ECU Exchange 2015 ●
Engine brake 2015 ●
4 (60)

Injector programming 2015 ●


Left speaker 2013-2015 ●
Level sensor calibration 2015 ●
Mute 2013-2015 ●
New diesel particulate filter installation 2013-2015 ●
Read service parameters 2015 ●
Relay, preheater 2015 ●
Right speaker 2013-2015 ●
System test while operating 2015 ●
Vehicle preset max speed 2015 ●
Write new service parameters, range/date 2015 ●

LF 2015 ● ● ● ● ● ● ●
Accelerated clutch adaption 2015 ●
Bleed clutch actuator 2015 ●
Bleed clutch actuator (fast) 2015 ●
Bleed gearbox actuator 2015 ●
Bleed hydraulic pump 2015 ●
Control outputs 2015 ●
Cylinder deactivation 2015 ●
Fill pressure accumulator 2015 ●
Fuel system leakage test 2015 ●
Gears, test 2015 ●
Glowplug relay 2015 ●
Level sensor calibration 2015 ●
Pressure accumulator discharge 2015 ●
Read service parameters 2015 ● ●
Recalculate factor rdyn 2015 ●
Self adaption gearbox system 2015 ●
Self adaption transfer point 2015 ●
Write new service parameters, range/date 2015 ● ●

EvoBus Chassis
BR 500 euro VI 2015 ● ● ● ● ● ● ● ● ● ●
Actuation of AdBlue delivery pump 2015 ●
Boost pressure regulator 2015 ●
Brake pressure test additional axle 2015 ●
Brake pressure test drive axle 2015 ●
Brake pressure test front axle 2015 ●
Calibration by means of test drive 2015 ●
Calibration level sensors 2015 ●
Check ABS solenoid valves at front axle 2015 ●
Compression test 2015 ●
Cylinder deactivation 2015 ●
Engine brake solenoid valve, stage 1 2015 ●
Engine brake solenoid valve, stage 2 2015 ●
Exhaust Gas Recirculation controller 2015 ●
Fan clutch solenoid valve 2015 ●
5 (60)

Flooding of retarder 2015 ●


Fuel Metering Solenoid Valve 2015 ●
Fuel shutoff valve 2015 ●
Function test of countershaft brake 2015 ●
Function test of shift operation 2015 ●
Function test of splitter operations 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of aligned axles 2015 ●
Learning of clutch with manual gearbox 2015 ●
Legal speed limit 2015 ●
Level sensor test 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Parameterization of Lane assistant camera 2015 ●
Read vehicle control unit list 2015 ●
Resetting the fault memory function 2015 ●
Solenoid valve test 2015 ●
Steering and learning of additional axle 2015 ●
Switchover of function ASR (Acceleration Slip Regulation)
2015 ●
Test of clutch 2015 ●
Test of NOx sensors 2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
Unit pump programming cylinder 5 2015 ●
Unit pump programming cylinder 6 2015 ●

O530 Citaro euro VI 2015 ● ● ● ● ● ● ●


Actuation of AdBlue delivery pump 2015 ●
Boost pressure regulator 2015 ●
Compression test 2015 ●
Cylinder deactivation 2015 ●
Engine brake solenoid valve, stage 1 2015 ●
Engine brake solenoid valve, stage 2 2015 ●
Exhaust Gas Recirculation controller 2015 ●
Fan clutch solenoid valve 2015 ●
Fuel Metering Solenoid Valve 2015 ●
Fuel shutoff valve 2015 ●
Kneeling calibration of the right hand side 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of clutch with manual gearbox 2015 ●
Level sensor calibration 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Pressure sensors, Calibration 2015 ●
Read vehicle control unit list 2015 ●
Test of NOx sensors 2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
6 (60)

Unit pump programming cylinder 5 2015 ●


Unit pump programming cylinder 6 2015 ●

Fiat
Ducato [-05] 2002-2005 ● ●
Fuel pressure regulator replacement 2002-2005 ●

Strada 2011-2013 ● ● ●
Fuel pressure regulator replacement 2011-2013 ●
TPMS (Tyre pressure monitoring system) control unit
2011-2013
configuration●reset

Doblo [00-09] 2001-2009 ● ● ● ●


Fuel pressure regulator replacement 2003-2009 ●
Power on and disable user inputs 2006-2009 ●
System shutdown 2006-2009 ●

Doblo [10-] 2010-2013 ● ●


Fuel pressure regulator replacement 2010-2013 ●
Power on and disable user inputs 2010-2013 ●
System shutdown 2010-2013 ●

Fiorino [08-] 2008-2013 ● ●


Fuel pressure regulator replacement 2008-2013 ●
TPMS (Tyre pressure monitoring system) control unit
2008-2013
configuration●reset

Ducato [06-] 2006-2015 ● ● ● ● ● ● ● ●


Accept configuration 2014-2015 ●
Accumulator depressurisation 2014-2015 ●
Activate bluetooth identification mode 2014-2015 ●
Additional diesel circuit filling 2014-2015 ●
Additional heater 2014-2015 ●
Additive pump 2014-2015 ●
Air flow meter replacement 2014-2015 ●
Air flow meter/Air mass meter 2014-2015 ●
Anti-tilt sensor check 2014-2015 ●
Audio system test 2014-2015 ●
AUTO switch replacement 2014-2015 ●
Bleed front left hand wheel circuit 2014-2015 ●
Bleed front right hand wheel circuit 2014-2015 ●
Bleed rear left hand wheel circuit. 2014-2015 ●
Bleed rear right hand wheel circuit. 2014-2015 ●
Bluetooth Network disconnection 2014-2015 ●
Change 2014-2015 ●
Check of the operation of the exhaust heat recovery
2014-2015
valve ●
Clutch bleed 2014-2015 ●
Clutch group and/or clutch potentiometer replacement
2014-2015 ●
Clutch replacement 2014-2015 ●
Clutch self-calibration 2014-2015 ●
7 (60)

Control unit replacement 2014-2015 ● ●


Convergence system reset 2014-2015 ●
Cooling fan step 1 2014-2015 ●
Cooling fan step 2 2014-2015 ●
Date of last service operation 2014-2015 ●
Delete oil change servicing information 2014-2015 ●
Differential Pressure Sensor Replacement 2014-2015 ●
Dusk and rain sensor check 2014-2015 ●
ECO switch replacement 2014-2015 ●
ECO/Sport switch replacement 2014-2015 ●
EGR exchanger exclusion valve 2014-2015 ●
EGR throttle learn 2014-2015 ●
EGR valve 2014-2015 ●
EGR Valve check 2014-2015 ●
EGR valve programming 2014-2015 ●
EGR valve test 2014-2015 ●
Electric pump replacement 2014-2015 ●
End of line / service self-calibration 2014-2015 ●
Engine decelerating 2014-2015 ●
Fire protection system 2014-2015 ●
Flap actuators learning test 2014-2015 ●
Flashing lights configuration 2014-2015 ●
Fuel pressure regulator 2014-2015 ●
Fuel pressure regulator replacement 2006-2015 ●
Gearbox lever replacement 2014-2015 ●
Gearbox oil accumulator replacement 2014-2015 ●
Glow plug preheating circuit test 2014-2015 ●
High pressure circuit leak test 2014-2015 ●
High pressure pump replacement 2014-2015 ●
Hydraulic kit replacement 2014-2015 ●
Inertia switch rearm (FIS) 2014-2015 ●
Injector 1 2014-2015 ●
Injector 2 2014-2015 ●
Injector 3 2014-2015 ●
Injector 4 2014-2015 ●
Injector classification 2014-2015 ●
Injector code programming 2014-2015 ●
Injector programming 2014-2015 ●
Injector programming cylinder 1 2014-2015 ●
Injector programming cylinder 2 2014-2015 ●
Injector programming cylinder 3 2014-2015 ●
Injector programming cylinder 4 2014-2015 ●
Injector programming cylinder 5 2014-2015 ●
Inlet air pressure sensor 2014-2015 ●
Inlet valve calibration 2014-2015 ●
Instrument panel replacement 2014-2015 ●
iTPMS self-learning 2014-2015 ●
Key programming 2014-2015 ●
Lambda sensor heater 2014-2015 ●
Lambda sensor replacement 2014-2015 ●
8 (60)

Language Change 2014-2015 ●


Language change in the display 2014-2015 ●
Lateral accelerator sensor calibration 2014-2015 ●
Lateral and longitudinal acceleration sensor calibration
2014-2015 ●
Lateral and longitudinal acceleration sensor calibration
2014-2015
reset ●
LIN data bus 2014-2015 ●
LIN siren check 2014-2015 ●
Longitudinal acceleration sensor calibration 2014-2015 ●
Longitudinal acceleration signal learn 2014-2015 ●
Main relay 2014-2015 ●
Mass air flow sensor 2014-2015 ●
Mechanical waste-gate valve replacement 2014-2015 ●
Modify lateral anti-tilt sensor 2014-2015 ●
Modify longitudinal anti-tilt sensor 2014-2015 ●
Modify volumetric sensors sensibility 2014-2015 ●
Neutral signal learn 2014-2015 ●
New actuators 2014-2015 ●
Odometer reset button 2014-2015 ●
Oil change 2014-2015 ● ●
Oil change reset (only for version with DPF) 2014-2015 ●
Particulate filter regeneration (only for version with
2014-2015
DPF) ●
Particulate filter replacement 2014-2015 ●
Phonic wheel replacement 2014-2015 ●
Pilot valve calibration 2014-2015 ●
Power on and disable user inputs 2012-2015 ●
Pre catalyser replacement 2014-2015 ●
Pressure sensor calibration 2014-2015 ●
Pump relay replacement 2014-2015 ●
Rail pressure sensor and injector/s replacement 2014-2015 ●
Rail pressure sensor replacement 2014-2015 ●
Rain and automatic lights sensors check 2014-2015 ●
Recall service message 2014-2015 ● ●
Recognition of speed sensor type 2014-2015 ●
Regeneration 2014-2015 ●
Relay, preheater 2014-2015 ●
Release transportmode 2014-2015 ●
Remote controls programming 2014-2015 ●
Replacement 2014-2015 ●
Replacement of automatic gearbox 2014-2015 ●
Replacement of control unit and injector/s 2014-2015 ●
Replacement of particulate filter with built-in pre-catalyser
2014-2015 ●
Replacement of the additive or the pump or the tubes2014-2015 ●
Replacement of the EGR valve 2014-2015 ●
Replacement of variable geometry turbo and/or turbo 2014-2015
position●sensor
Reset adaption 2014-2015 ●
Reset distance to next servicing 2014-2015 ●
Reset gearbox configuration 2014-2015 ●
Reset odometer 2014-2015 ●
Reset parameters configuration 2014-2015 ●
Reset service 2014-2015 ●
9 (60)

Resetting distance traveled with water in diesel warning


2014-2015
lamp on

Resetting distance traveled with water temperature2014-2015
warning lamp
● on
Seat belt warning buzzer 2014-2015 ●
Selection and/or engagement clutch electro valve 2014-2015
replacement ●
Self learnt functions reset 2014-2015 ● ●
Sensor replacement 2014-2015 ●
Speed limit setting 2014-2015 ●
Static test 2014-2015 ●
Statistical data deletion 2014-2015 ●
Steering angle calibration 2014-2015 ●
Steering angle reset 2014-2015 ●
Steering wheel levers replacement 2014-2015 ●
Supercharging air cooling solenoid valve opening 2014-2015 ●
System shutdown 2012-2015 ●
Throttle test 2014-2015 ●
Tire pressure monitoring sensors learning 2014-2015 ●
Tow hook 2014-2015 ●
TPMS (Tyre Pressure Monitoring System) 2014-2015 ●
TPMS (Tyre pressure monitoring system) control unit
2006-2015
configuration●reset
TPMS calibration 2014-2015 ●
Turbocharger actuator 2014-2015 ●
Turbocharger replacement 2014-2015 ●
Tyre pressure monitoring 2014-2015 ●
Ultrasonic sensor check 2014-2015 ●
Variable geometry turbocharger 2014-2015 ●
Window wash system check 2014-2015 ●
Yaw sensor calibration 2014-2015 ●

Scudo [07-] 2007-2013 ● ● ● ●


Fuel pressure regulator replacement 2007-2013 ●
TPMS (Tyre pressure monitoring system) control unit
2007-2013
configuration●reset

Ford
Transit [06-14] 2013-2014 ●
Fuel Injection Pump Learn 2013-2014 ●
Pilot injection learn 2013-2014 ●
Reset the Fuel Pressure Relief Valve Open Count Learned
2013-2014
Value●
Reset the Fuel Pressure Relief Valve Open Duration2013-2014
Learned Value

Speed limiting 2013-2014 ●

Fiesta Van [13-] 2013-2015 ● ●


Manual learning of tire pressure sensors 2013-2015 ● ●
Programing of wheel sensor ID 2013-2015 ●
Selftest, ignition on, engine off 2013-2015 ●

Tourneo Connect [14-] 2014-2015 ● ●


Battery monitor 2014-2015 ●
Erase registered crash 2014-2015 ●
10 (60)

Manual learning of tire pressure sensors 2014-2015 ● ●


Selftest, ignition on, engine off 2014-2015 ●
Windscreen wiper motor calibration 2014-2015 ●

Transit Connect [14-] 2014-2015 ●


Manual learning of tire pressure sensors 2014-2015 ●

Ford Cargo
C8t 2005-2015 ● ●
Cylinder deactivation 2005-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C11t 2013-2015 ● ●
Trip Information 2013-2015 ●
Trip information reset 2013-2015 ●

C13t 2005-2015 ● ●
Cylinder deactivation 2005-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C15t 2005-2015 ● ●
Cylinder deactivation 2005-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C17t 2005-2015 ● ●
Cylinder deactivation 2005-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C19t 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C24t 2006-2015 ● ●
Cylinder deactivation 2006-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C26t 2006-2015 ● ●
Cylinder deactivation 2006-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C29t 2006-2011 ● ●
11 (60)

Cylinder deactivation 2006-2011 ●

C31t 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

C44t 2006-2007 ● ●
Cylinder deactivation 2006-2007 ●

C45t 2007-2011 ● ●
Cylinder deactivation 2007-2011 ●

C50t 2006-2011 ● ●
Cylinder deactivation 2006-2011 ●

C20t 2013-2015 ● ● ●
ECU Exchange 2013-2015 ●
System test while operating 2013-2015 ●

C28t 2013-2015 ● ● ●
ECU Exchange 2013-2015 ●
System test while operating 2013-2015 ●

Generic Bus Systems


30-pin Iveco diagnostic socket All years ●

All supported systems All years ●

Generic Truck Systems


All supported systems All years ●

30-pin Iveco diagnostic socket All years ●

Heuliez Bus
GX117 2001-2006 ●

Irisbus Chassis
Midirider/Midys/Mydway 2001-2006 ●

Proxys/Proway 2001-2006 ●
12 (60)

Eurorider/Domino 2001-2006 ●

Iveco
Daily V 2011-2014 ●

Daily VI 2014-2015 ● ● ● ● ●
AdBlue dosing valve 2014-2015 ●
Boost pressure sensor replacement 2014-2015 ●
Change air mass meter 2014-2015 ●
Change differential pressure sensor 2014-2015 ●
Compression test 2014-2015 ●
Cylinder deactivation 2014-2015 ●
Lambda sensor replacement 2014-2015 ●
Level sensor calibration 2014-2015 ●
Oil change 2014-2015 ●
Particle filter replacement 2014-2015 ●
Rail pressure control valve replacement 2014-2015 ●
Rail pressure sensor replacement 2014-2015 ●
Turbocharger replacement 2014-2015 ●

Iveco Trucks
Stralis [02-06] 2002-2006 ● ● ● ● ● ● ● ●
Additional fan 2002-2006 ●
Air Suspension activation 2002-2006 ●
Air suspension calibration 2002-2006 ●
Combustion air fan 2002-2006 ●
Control water pump 2002-2006 ●
Fuel pump 2002-2006 ●
Glowplug preheat check 2002-2006 ●
Status led 2002-2006 ●

Stralis [07-13] 2007-2013 ● ● ● ● ● ● ●


Adblue system test 2008-2013 ●
Additional fan 2007-2013 ●
Air Suspension activation 2007-2013 ●
Air suspension calibration 2007-2013 ●
Air system test 2008-2013 ●
Catalyst replacement 2007-2013 ●
Combustion air fan 2007-2013 ●
Compression test 2007-2013 ●
Condition test on the variable geometry turbocharger
2007-2013 ●
Control water pump 2007-2013 ●
Cylinder deactivation 2007-2013 ●
Dosing valve check 2008-2013 ●
Engine brake valve 2007-2013 ●
Engine speed 2007-2013 ●
13 (60)

Flushing phase 2008-2013 ●


Fuel pump 2007-2013 ●
Glowplug preheat check 2007-2013 ●
Pressure maintaining 2008-2013 ●
Pressurising phase 2008-2013 ●
Reach 28 2008-2013 ●
Self-adapting parameter reset 2008-2013 ●
Status led 2007-2013 ●
Storing of throttle valve parameters 2008-2013 ●
System emptying 2008-2013 ●
Test of the heater 2008-2013 ●
Turbocharger boost control actuator 2007-2013 ●

Stralis [14->] 2014 ● ● ● ● ● ● ●


Additional fan 2014 ●
Air Suspension activation 2014 ●
Brake lining condition 2014 ●
Combustion air fan 2014 ●
Glowplug preheat check 2014 ●
Status led 2014 ●

EuroTrakker 2002-2004 ● ● ● ●

Trakker [05-13] 2005-2013 ● ● ● ● ● ●


Adblue system test 2005-2013 ●
Additional fan 2005-2013 ●
Air Suspension activation 2005-2013 ●
Air suspension calibration 2005-2013 ●
Air system test 2005-2013 ●
Catalyst replacement 2005-2013 ●
Combustion air fan 2005-2013 ●
Compression test 2005-2013 ●
Condition test on the variable geometry turbocharger
2005-2013 ●
Control water pump 2005-2013 ●
Cylinder deactivation 2005-2013 ●
Dosing valve check 2005-2013 ●
Engine brake valve 2005-2013 ●
Engine speed 2005-2013 ●
Flushing phase 2005-2013 ●
Fuel pump 2005-2013 ●
Glowplug preheat check 2005-2013 ●
Pressure maintaining 2005-2013 ●
Pressurising phase 2005-2013 ●
Reach 28 2005-2013 ●
Status led 2005-2013 ●
System emptying 2005-2013 ●
Test of the heater 2005-2013 ●
Turbocharger boost control actuator 2005-2013 ●

Trakker [14->] 2014 ● ● ● ● ● ● ●


14 (60)

Additional fan 2014 ●


Air Suspension activation 2014 ●
Brake lining condition 2014 ●
Combustion air fan 2014 ●
Glowplug preheat check 2014 ●
Status led 2014 ●

EuroCargo [02-06] 2002-2006 ● ● ● ● ● ●


Air Suspension activation 2005-2006 ●
Air suspension calibration 2005-2006 ●
Clutch closing Valve: MV8 2006 ●
Clutch closing Valve: MV9 2006 ●
Clutch closing Valves: MV8_MV9 2006 ●
Clutch opening Valve: MV7 2006 ●
Cylinder deactivation 2002-2006 ●
Engage Valve: MV3 2006 ●
Engage Valve: MV4 2006 ●
Engage Valve: MV5 2006 ●
Hydraulic pump 2006 ●
Selection Valve: MV1 2006 ●
Selection Valve: MV2 2006 ●

EuroCargo [07-13] 2007-2013 ● ● ● ● ● ● ●


Adblue system test 2007-2013 ●
Additional fan 2008-2013 ●
Air Suspension activation 2007-2013 ●
Air suspension calibration 2007-2013 ●
Air system test 2007-2013 ●
Catalyst replacement 2007-2013 ●
Clutch closing Valve: MV8 2007-2013 ●
Clutch closing Valve: MV9 2007-2013 ●
Clutch closing Valves: MV8_MV9 2007-2013 ●
Clutch opening Valve: MV7 2007-2013 ●
Combustion air fan 2008-2013 ●
Compression test 2007-2013 ●
Condition test on the variable geometry turbocharger
2007-2013 ●
Cylinder deactivation 2007-2013 ●
Dosing valve check 2007-2013 ●
Engage Valve: MV3 2007-2013 ●
Engage Valve: MV4 2007-2013 ●
Engage Valve: MV5 2007-2013 ●
Engine brake valve 2007-2013 ●
Engine speed 2007-2013 ●
Flushing phase 2007-2013 ●
Glowplug preheat check 2008-2013 ●
Hydraulic pump 2007-2013 ●
Pressure maintaining 2007-2013 ●
Pressurising phase 2007-2013 ●
Reach 28 2007-2013 ●
Selection Valve: MV1 2007-2013 ●
15 (60)

Selection Valve: MV2 2007-2013 ●


Self-adapting parameter reset 2008-2013 ●
Status led 2008-2013 ●
Storing of throttle valve parameters 2008-2013 ●
System emptying 2007-2013 ●
Test of the heater 2007-2013 ●
Turbocharger boost control actuator 2007-2013 ●

EuroCargo [14->] 2014 ● ● ● ●


Air Suspension activation 2014 ●
Air suspension calibration 2014 ●

Mahindra/Renault
Logan 2003-2009 ●
Adaptives after injector replacement 2003-2009 ●
EGR programming cut off 2003-2009 ●

MAN
TGL [06-13] 2006-2013 ● ● ● ● ● ● ● ● ●
Accelerator pedal calibration 2006-2012 ●
Activate Brake pad wear symbol and display message 2013 ●
Activate check lamp brake red/display message 2013 ●
Activate check lamp yellow/display message 2013 ●
AdBlue main filter and pump heating 2013 ●
AdBlue metering module test large 2013 ●
AdBlue metering module test medium 2013 ●
AdBlue metering module test small 2013 ●
Anti theft warning system signal 2013 ●
Bleed valve (AdBlue) in supply module 2013 ●
Blower motor 2013 ●
Calibration level sensors 2006-2012 ●
Change engine oil quality 2006-2012 ●
Change gearbox oil quality 2006-2012 ●
Change rear axle oil quality 2006-2012 ●
Checking the air lines 2013 ●
Clutch calibration with lining change 2006-2013 ●
Clutch calibration without lining change 2006-2013 ●
Compression test 2006-2013 ●
Coolant valve for AdBlue heating circuit 2013 ●
Delete safety error memory 2013 ●
Emptying AdBlue circuit 2013 ●
ESP System Sensors Calibration 2013 ●
Fill fuel line 2013 ●
Glow plug preheating circuit test 2013 ●
Heating of AdBlue lines in the supply module 2013 ●
High-pressure test 2008-2013 ●
16 (60)

Initial startup 2013 ●


Level sensor calibration 2013 ●
Metering module 2013 ●
Metering pump 2013 ●
Pressure control module front axle left 1 Bar 2013 ●
Pressure control module, driven axle, left 1 Bar 2013 ●
Pressure control module, driven axle, left 10 Bar 2013 ●
Pressure control module, driven axle, left 5 Bar 2013 ●
Pressure control module, driven axle, right 1 Bar 2013 ●
Pressure control module, driven axle, right 10 Bar 2013 ●
Pressure control module, driven axle, right 5 Bar 2013 ●
Pressure control module, front axle, left 10 Bar 2013 ●
Pressure control module, front axle, left 5 Bar 2013 ●
Pressure control module, front axle, right 1 Bar 2013 ●
Pressure control module, front axle, right 10 Bar 2013 ●
Pressure control module, front axle, right 5 Bar 2013 ●
Pressure sensor calibration 2006-2012 ●
Pressure sensors, Calibration 2013 ●
Pump activation in the supply module 2013 ●
Read customer specific maintenance parameters 2006-2013 ●
Read service parameters 2006-2013 ●
Reset customer specific maintenance parameters 2006-2013 ●
Reset oxygen sensor adaptions 2008-2013 ●
Reset service 2006-2013 ●
Reset torque limiting 2008-2013 ●
Reset values after exchanging particulate trap 2008-2013 ●
Shut-off cylinder 1 2006-2013 ●
Shut-off cylinder 2 2006-2013 ●
Shut-off cylinder 3 2006-2013 ●
Shut-off cylinder 4 2006-2013 ●
Shut-off cylinder 5 2006-2013 ●
Shut-off cylinder 6 2006-2013 ●
Signal analysis, Exhaust gases 2008-2013 ●
Signal analysis, injection volume and engine speed2008-2013 ●

TGL [14->] 2014 ● ● ● ● ● ● ● ●


Activate Brake pad wear symbol and display message 2014 ●
Activate check lamp brake red/display message 2014 ●
Activate check lamp yellow/display message 2014 ●
AdBlue high flow dosing test 2014 ●
AdBlue medium flow dosing test 2014 ●
Air unit test 2014 ●
Anti theft warning system signal 2014 ●
Blower motor 2014 ●
Clutch calibration with lining change 2014 ●
Clutch calibration without lining change 2014 ●
Compression test 2014 ●
Cylinder deactivation 2014 ●
Delete safety error memory 2014 ●
ESP System Sensors Calibration 2014 ●
17 (60)

Fill fuel line 2014 ●


Glow plug preheating circuit test 2014 ●
HCI system test 2014 ●
Heating of AdBlue lines in the supply module 2014 ●
High-pressure test 2014 ●
Injector programming 2014 ●
Lambda correction factor 2014 ●
Level sensor calibration 2014 ●
Metering pump 2014 ●
Pressure control module front axle left 1 Bar 2014 ●
Pressure control module, driven axle, left 1 Bar 2014 ●
Pressure control module, driven axle, left 10 Bar 2014 ●
Pressure control module, driven axle, left 5 Bar 2014 ●
Pressure control module, driven axle, right 1 Bar 2014 ●
Pressure control module, driven axle, right 10 Bar 2014 ●
Pressure control module, driven axle, right 5 Bar 2014 ●
Pressure control module, front axle, left 10 Bar 2014 ●
Pressure control module, front axle, left 5 Bar 2014 ●
Pressure control module, front axle, right 1 Bar 2014 ●
Pressure control module, front axle, right 10 Bar 2014 ●
Pressure control module, front axle, right 5 Bar 2014 ●
Pressure limiting valve (DBV) open 2014 ●
Pressure sensors, Calibration 2014 ●
Read customer specific maintenance parameters 2014 ●
Read injector configuration 2014 ●
Read service parameters 2014 ●
Reset AdBlue plausibility 2014 ●
Reset customer specific maintenance parameters 2014 ●
Reset learned values of the pressure limiting valve 2014 ●
Reset parameter; number of interrupted regenerations 2014 ●
Reset parameter; too frequent regeneration request 2014 ●
Reset service 2014 ●
Reset the diesel particulate filter differential pressure sensor
2014 learned
● values
Reset values after exchanging particulate trap 2014 ●
Rev-up test 2014 ●
System fill-up 2014 ●
Test of AdBlue pump 2014 ●

TGM [06-13] 2006-2013 ● ● ● ● ● ● ● ● ●


Accelerator pedal calibration 2006-2012 ●
Activate Brake pad wear symbol and display message 2013 ●
Activate check lamp brake red/display message 2013 ●
Activate check lamp yellow/display message 2013 ●
AdBlue main filter and pump heating 2006-2013 ●
AdBlue metering module test large 2006-2013 ●
AdBlue metering module test medium 2006-2013 ●
AdBlue metering module test small 2006-2013 ●
Anti theft warning system signal 2013 ●
Bleed valve (AdBlue) in supply module 2006-2013 ●
Blower motor 2013 ●
18 (60)

Calibration level sensors 2006-2012 ●


Calibration of steering angle sensor 2010-2012 ●
Change engine oil quality 2006-2012 ●
Change gearbox oil quality 2006-2012 ●
Change rear axle oil quality 2006-2012 ●
Checking the air lines 2006-2013 ●
Clutch calibration with lining change 2006-2013 ●
Clutch calibration without lining change 2006-2013 ●
Compression test 2006-2013 ●
Coolant valve for AdBlue heating circuit 2006-2013 ●
Delete safety error memory 2010-2013 ●
Emptying AdBlue circuit 2006-2013 ●
ESP System Sensors Calibration 2013 ●
Fill fuel line 2013 ●
Glow plug preheating circuit test 2013 ●
Heating of AdBlue lines in the supply module 2006-2013 ●
High-pressure test 2008-2013 ●
Initial startup 2006-2013 ●
Level sensor calibration 2013 ●
Metering module 2006-2013 ●
Metering pump 2013 ●
Pressure control module front axle left 1 Bar 2013 ●
Pressure control module, driven axle, left 1 Bar 2013 ●
Pressure control module, driven axle, left 10 Bar 2013 ●
Pressure control module, driven axle, left 5 Bar 2013 ●
Pressure control module, driven axle, right 1 Bar 2013 ●
Pressure control module, driven axle, right 10 Bar 2013 ●
Pressure control module, driven axle, right 5 Bar 2013 ●
Pressure control module, front axle, left 10 Bar 2013 ●
Pressure control module, front axle, left 5 Bar 2013 ●
Pressure control module, front axle, right 1 Bar 2013 ●
Pressure control module, front axle, right 10 Bar 2013 ●
Pressure control module, front axle, right 5 Bar 2013 ●
Pressure control modules 2010-2012 ●
Pressure sensor calibration 2006-2012 ●
Pressure sensors, Calibration 2013 ●
Pump activation in the supply module 2006-2013 ●
Read customer specific maintenance parameters 2006-2013 ●
Read service parameters 2006-2013 ●
Reset customer specific maintenance parameters 2006-2013 ●
Reset oxygen sensor adaptions 2008-2013 ●
Reset service 2006-2013 ●
Reset torque limiting 2008-2013 ●
Reset values after exchanging particulate trap 2008-2013 ●
Shut-off cylinder 1 2006-2013 ●
Shut-off cylinder 2 2006-2013 ●
Shut-off cylinder 3 2006-2013 ●
Shut-off cylinder 4 2006-2013 ●
Shut-off cylinder 5 2006-2013 ●
Shut-off cylinder 6 2006-2013 ●
19 (60)

Signal analysis, Exhaust gases 2008-2013 ●


Signal analysis, injection volume and engine speed2008-2013 ●
Yaw Rate Sensor Calibration 2010-2012 ●

TGM [14->] 2014 ● ● ● ● ● ● ● ●


Activate Brake pad wear symbol and display message 2014 ●
Activate check lamp brake red/display message 2014 ●
Activate check lamp yellow/display message 2014 ●
AdBlue high flow dosing test 2014 ●
AdBlue medium flow dosing test 2014 ●
Air unit test 2014 ●
Anti theft warning system signal 2014 ●
Blower motor 2014 ●
Clutch calibration with lining change 2014 ●
Clutch calibration without lining change 2014 ●
Compression test 2014 ●
Cylinder deactivation 2014 ●
Delete safety error memory 2014 ●
ESP System Sensors Calibration 2014 ●
Fill fuel line 2014 ●
Glow plug preheating circuit test 2014 ●
HCI system test 2014 ●
Heating of AdBlue lines in the supply module 2014 ●
High-pressure test 2014 ●
Injector programming 2014 ●
Lambda correction factor 2014 ●
Level sensor calibration 2014 ●
Metering pump 2014 ●
Pressure control module front axle left 1 Bar 2014 ●
Pressure control module, driven axle, left 1 Bar 2014 ●
Pressure control module, driven axle, left 10 Bar 2014 ●
Pressure control module, driven axle, left 5 Bar 2014 ●
Pressure control module, driven axle, right 1 Bar 2014 ●
Pressure control module, driven axle, right 10 Bar 2014 ●
Pressure control module, driven axle, right 5 Bar 2014 ●
Pressure control module, front axle, left 10 Bar 2014 ●
Pressure control module, front axle, left 5 Bar 2014 ●
Pressure control module, front axle, right 1 Bar 2014 ●
Pressure control module, front axle, right 10 Bar 2014 ●
Pressure control module, front axle, right 5 Bar 2014 ●
Pressure limiting valve (DBV) open 2014 ●
Pressure sensors, Calibration 2014 ●
Read customer specific maintenance parameters 2014 ●
Read injector configuration 2014 ●
Read service parameters 2014 ●
Reset AdBlue plausibility 2014 ●
Reset customer specific maintenance parameters 2014 ●
Reset learned values of the pressure limiting valve 2014 ●
Reset parameter; number of interrupted regenerations 2014 ●
Reset parameter; too frequent regeneration request 2014 ●
20 (60)

Reset service 2014 ●


Reset the diesel particulate filter differential pressure sensor
2014 learned
● values
Reset values after exchanging particulate trap 2014 ●
Rev-up test 2014 ●
System fill-up 2014 ●
Test of AdBlue pump 2014 ●

TGS [08-13] 2008-2013 ● ● ● ● ● ● ● ●


Accelerator pedal calibration 2008-2011 ●
AdBlue main filter and pump heating 2008-2013 ●
AdBlue metering module test large 2008-2013 ●
AdBlue metering module test medium 2008-2013 ●
AdBlue metering module test small 2008-2013 ●
Anti theft warning system signal 2008-2013 ●
Bleed valve (AdBlue) in supply module 2008-2013 ●
Blower motor 2008-2013 ●
Calibration of steering angle sensor 2010-2013 ●
Change engine oil quality 2008-2011 ●
Change gearbox oil quality 2008-2011 ●
Change rear axle oil quality 2008-2011 ●
Checking the air lines 2008-2013 ●
Clutch calibration with lining change 2008-2012 ●
Clutch calibration without lining change 2008-2012 ●
Compression test 2008-2013 ●
Coolant valve for AdBlue heating circuit 2008-2013 ●
Delete safety error memory 2008-2013 ●
Emptying AdBlue circuit 2008-2013 ●
Fill fuel line 2008-2013 ●
Glow plug preheating circuit test 2008-2013 ●
Heating of AdBlue lines in the supply module 2008-2013 ●
High-pressure test 2008-2013 ●
Initial startup 2008-2013 ●
Level sensor calibration 2008-2013 ●
Metering module 2008-2013 ●
Metering pump 2008-2013 ●
Pressure control modules 2010-2013 ●
Pressure sensors, Calibration 2008-2013 ●
Pump activation in the supply module 2008-2013 ●
Read customer specific maintenance parameters 2008-2013 ●
Read service parameters 2008-2013 ●
Reset customer specific maintenance parameters 2008-2013 ●
Reset oxygen sensor adaptions 2008-2013 ●
Reset service 2008-2013 ●
Reset torque limiting 2008-2013 ●
Reset values after exchanging particulate trap 2008-2013 ●
Shut-off cylinder 1 2008-2013 ●
Shut-off cylinder 2 2008-2013 ●
Shut-off cylinder 3 2008-2013 ●
Shut-off cylinder 4 2008-2013 ●
Shut-off cylinder 5 2008-2013 ●
21 (60)

Shut-off cylinder 6 2008-2013 ●


Shut-off cylinder 7 2008-2013 ●
Shut-off cylinder 8 2008-2013 ●
Signal analysis, Exhaust gases 2008-2013 ●
Signal analysis, injection volume and engine speed2008-2013 ●
Steering angle sensor front axle 2013 ●
Steering angle sensor steered rear axle 2013 ●
Yaw Rate Sensor Calibration 2010-2013 ●

TGS [14->] 2014 ● ● ● ● ● ● ● ●


AdBlue high flow dosing test 2014 ●
AdBlue medium flow dosing test 2014 ●
Air unit test 2014 ●
Anti theft warning system signal 2014 ●
Blower motor 2014 ●
Calibration of steering angle sensor 2014 ●
Compression test 2014 ●
Cylinder deactivation 2014 ●
Delete safety error memory 2014 ●
Fill fuel line 2014 ●
Glow plug preheating circuit test 2014 ●
HCI system test 2014 ●
Heating of AdBlue lines in the supply module 2014 ●
High-pressure test 2014 ●
Injector programming 2014 ●
Lambda correction factor 2014 ●
Level sensor calibration 2014 ●
Metering pump 2014 ●
Pressure control modules 2014 ●
Pressure limiting valve (DBV) open 2014 ●
Pressure sensors, Calibration 2014 ●
Read customer specific maintenance parameters 2014 ●
Read injector configuration 2014 ●
Read service parameters 2014 ●
Reset AdBlue plausibility 2014 ●
Reset customer specific maintenance parameters 2014 ●
Reset learned values of the pressure limiting valve 2014 ●
Reset parameter; number of interrupted regenerations 2014 ●
Reset parameter; too frequent regeneration request 2014 ●
Reset service 2014 ●
Reset the diesel particulate filter differential pressure sensor
2014 learned
● values
Reset values after exchanging particulate trap 2014 ●
Rev-up test 2014 ●
Steering angle sensor front axle 2014 ●
Steering angle sensor steered rear axle 2014 ●
System fill-up 2014 ●
Test of AdBlue pump 2014 ●
Yaw Rate Sensor Calibration 2014 ●

TGX [08-13] 2008-2013 ● ● ● ● ● ● ● ●


22 (60)

Accelerator pedal calibration 2008-2011 ●


AdBlue main filter and pump heating 2008-2013 ●
AdBlue metering module test large 2008-2013 ●
AdBlue metering module test medium 2008-2013 ●
AdBlue metering module test small 2008-2013 ●
Anti theft warning system signal 2008-2013 ●
Bleed valve (AdBlue) in supply module 2008-2013 ●
Blower motor 2008-2013 ●
Calibration of steering angle sensor 2008-2013 ●
Change engine oil quality 2008-2011 ●
Change gearbox oil quality 2008-2011 ●
Change rear axle oil quality 2008-2011 ●
Checking the air lines 2008-2013 ●
Clutch calibration with lining change 2008-2012 ●
Clutch calibration without lining change 2008-2012 ●
Compression test 2008-2013 ●
Coolant valve for AdBlue heating circuit 2008-2013 ●
Delete safety error memory 2008-2013 ●
Emptying AdBlue circuit 2008-2013 ●
Fill fuel line 2008-2013 ●
Glow plug preheating circuit test 2008-2013 ●
Heating of AdBlue lines in the supply module 2008-2013 ●
High-pressure test 2008-2013 ●
Initial startup 2008-2013 ●
Level sensor calibration 2008-2013 ●
Metering module 2008-2013 ●
Metering pump 2008-2013 ●
Pressure control modules 2008-2013 ●
Pressure sensors, Calibration 2008-2013 ●
Pump activation in the supply module 2008-2013 ●
Read customer specific maintenance parameters 2008-2013 ●
Read service parameters 2008-2013 ●
Reset customer specific maintenance parameters 2008-2013 ●
Reset oxygen sensor adaptions 2008-2013 ●
Reset service 2008-2013 ●
Reset torque limiting 2008-2013 ●
Reset values after exchanging particulate trap 2008-2013 ●
Shut-off cylinder 1 2008-2013 ●
Shut-off cylinder 2 2008-2013 ●
Shut-off cylinder 3 2008-2013 ●
Shut-off cylinder 4 2008-2013 ●
Shut-off cylinder 5 2008-2013 ●
Shut-off cylinder 6 2008-2013 ●
Shut-off cylinder 7 2008-2013 ●
Shut-off cylinder 8 2008-2013 ●
Signal analysis, Exhaust gases 2008-2013 ●
Signal analysis, injection volume and engine speed2008-2013 ●
Steering angle sensor front axle 2013 ●
Steering angle sensor steered rear axle 2013 ●
Yaw Rate Sensor Calibration 2008-2013 ●
23 (60)

TGX [14->] 2014 ● ● ● ● ● ● ● ●


AdBlue high flow dosing test 2014 ●
AdBlue medium flow dosing test 2014 ●
Air unit test 2014 ●
Anti theft warning system signal 2014 ●
Blower motor 2014 ●
Calibration of steering angle sensor 2014 ●
Compression test 2014 ●
Cylinder deactivation 2014 ●
Delete safety error memory 2014 ●
Fill fuel line 2014 ●
Glow plug preheating circuit test 2014 ●
HCI system test 2014 ●
Heating of AdBlue lines in the supply module 2014 ●
High-pressure test 2014 ●
Injector programming 2014 ●
Lambda correction factor 2014 ●
Level sensor calibration 2014 ●
Metering pump 2014 ●
Pressure control modules 2014 ●
Pressure limiting valve (DBV) open 2014 ●
Pressure sensors, Calibration 2014 ●
Read customer specific maintenance parameters 2014 ●
Read injector configuration 2014 ●
Read service parameters 2014 ●
Reset AdBlue plausibility 2014 ●
Reset customer specific maintenance parameters 2014 ●
Reset learned values of the pressure limiting valve 2014 ●
Reset parameter; number of interrupted regenerations 2014 ●
Reset parameter; too frequent regeneration request 2014 ●
Reset service 2014 ●
Reset the diesel particulate filter differential pressure sensor
2014 learned
● values
Reset values after exchanging particulate trap 2014 ●
Rev-up test 2014 ●
Steering angle sensor front axle 2014 ●
Steering angle sensor steered rear axle 2014 ●
System fill-up 2014 ●
Test of AdBlue pump 2014 ●
Yaw Rate Sensor Calibration 2014 ●

F2000 1998-2001 ● ● ●

F2000 Evolution 2000-2002 ● ● ●

L2000 1998-2002 ● ● ●

LE2000 2002-2005 ● ● ●

M2000 1998-2002 ● ● ●
24 (60)

M2000 Evolution 2000-2002 ● ● ●

MAN Bus Chassis


A23 2004 ●

Mercedes
Sprinter [906] 2011-2016 ● ● ● ● ● ● ● ● ●
AdBlue metering valve 2014-2016 ●
Air recirculation flap learning 2014-2016 ●
Brake bleed system ABS/ESP 2014-2016 ●
Camshaft hall sensor, reset adaption data 2014-2016 ●
Clear adaption memory 2014-2016 ● ●
Control unit initialization 2014-2016 ● ●
Crankshaft position sensor 2014-2016 ●
Disable gas operation 2014-2016 ●
Enable gas operation 2014-2016 ●
Evacuate the gas system 2014-2016 ●
Fill the gas system 2014-2016 ●
Flap motors calibration 2014-2016 ●
Forced regeneration 2014-2016 ●
Fuel filter heater 2014-2016 ●
Fuel pressure sensor 2014-2016 ●
Fuel pump activation 2014-2016 ●
History of regeneration of diesel particulate filter 2014-2016 ●
Injection shut-off 2014-2016 ●
Injector programming 2014-2016 ●
Learning process: Selection range sensor 2014-2016 ●
O2 sensor circuit before catalytic converter 2014-2016 ●
Program diesel particle filter after engine control unit
2014-2016
change ●
Reset adaption values after replacement of Diesel 2014-2016
particulate filter
● / Oxidation catalytic converter
Reset control unit 2014-2016 ● ● ● ●
Reset diesel particle filter 2014-2016 ●
Reset of the intake air throttle valve values 2014-2016 ●
Reset oxygen sensor adaptions 2014-2016 ●
Reset quantity mean value adaptation 2014-2016 ●
Reset service 2014-2016 ● ●
Resetting of adaption data: Torque converter lockup 2014-2016
clutch ●
Resetting of adaption data: Up & Downshifts 2014-2016 ●
SCR catalytic converter 2014-2016 ●
Speed limiting 2014-2016 ●
Teach in component AdBlue injection valve 2014-2016 ●
Temperature sensor after SCR catalytic converter 2014-2016 ●
Throttle learning 2014-2016 ●
Throttle position learning 2014-2016 ●
Unlock independent/auxiliary heater 2014-2016 ●
25 (60)

Yaw rate, lateral and longitudinal acceleration sensor


2014-2016 ●
Zero quantity calibration 2014-2016 ●

Citan [415] 2016 ● ● ● ● ● ● ●


Air flow meter programming 2016 ●
Air intake flap adaptives 2016 ●
Calibration of steering angle sensor 2016 ●
Engine adaptives 2016 ●
Exhaust flap low setting 2016 ●
Flywheel target programming 2016 ●
Function smooth running adjustment 2016 ●
High pressure EGR valve programming 2016 ●
High pressure fuel pump 2016 ●
Injector programming 2016 ●
Low pressure EGR valve programming 2016 ●
Manifold pressure sensor programming 2016 ●
Particle filter pressure diff. sensor 2016 ●
Particle filter regeneration 2016 ●
Service light reset 2016 ● ●
Turbocharging programming 2016 ●
Yaw rate/longitude acceleration sensors 2016 ●

V-Class [W447] 2014-2016 ● ● ● ● ● ● ● ●


AdBlue metering valve 2016 ●
Brake bleed system ESP 2016 ●
Calibrate AdBlue fill level sensor 2016 ●
Calibration of steering angle sensor 2014-2016 ●
Cancel latest service reset 2016 ● ●
Drive [D] 2016 ●
Forced regeneration 2016 ●
Gear positions programming 2016 ●
High pressure and return pump 2016 ●
Learning of wheel sensor ID 2016 ●
Learning zero point level 2016 ●
Neutral [N] 2016 ●
Operating time 2016 ●
Operating time fan 2016 ●
Park [P] 2016 ●
Programing of wheel sensor ID 2016 ●
Recall service message 2016 ● ●
Reset control unit 2016 ● ● ● ● ●
Reset mass air flow adaptions 2016 ●
Reset of the intake air throttle valve values 2016 ●
Reset oxygen sensor adaptions 2016 ●
Reset quantity mean value adaptation 2016 ●
Reset the diesel particulate filter differential pressure sensor
2016 learned
● values
Resetting the calculated fill level of the adblue tank 2016 ●
Reverse [R] 2016 ●
Throttle learning 2016 ●
Zero quantity calibration 2016 ●
26 (60)

Vito [W447] 2015-2016 ● ● ● ● ● ● ● ●


AdBlue metering valve 2016 ●
Brake bleed system ESP 2016 ●
Calibrate AdBlue fill level sensor 2016 ●
Calibration of steering angle sensor 2015-2016 ●
Cancel latest service reset 2016 ● ●
Drive [D] 2016 ●
Forced regeneration 2016 ●
Gear positions programming 2016 ●
High pressure and return pump 2016 ●
Learning of wheel sensor ID 2016 ●
Learning zero point level 2016 ●
Neutral [N] 2016 ●
Operating time 2016 ●
Operating time fan 2016 ●
Park [P] 2016 ●
Programing of wheel sensor ID 2016 ●
Recall service message 2016 ● ●
Reset control unit 2016 ● ● ● ● ●
Reset mass air flow adaptions 2016 ●
Reset of the intake air throttle valve values 2016 ●
Reset oxygen sensor adaptions 2016 ●
Reset quantity mean value adaptation 2016 ●
Reset the diesel particulate filter differential pressure sensor
2016 learned
● values
Resetting the calculated fill level of the adblue tank 2016 ●
Reverse [R] 2016 ●
Throttle learning 2016 ●
Zero quantity calibration 2016 ●

Mercedes Truck
Actros MP III 2014-2015 ● ● ● ● ● ● ● ● ● ●
Actuation of clutch operator. Only on models with2014-2015
control unit GS. ●
Calibration level sensors 2014-2015 ● ●
Change onboard reset 2014-2015 ● ●
Check metering quantity of AdBlue metering unit 2014-2015 ●
Cleaning of AdBlue metering unit 2014-2015 ●
Clear alarmcause memory 2014-2015 ●
Clutch adjustment automatic gearbox 2014-2015 ●
Combustion air blower 2014-2015 ●
Compression test 2014-2015 ●
Cylinder Balancing 2014-2015 ●
Enter VIN-code 17 characters 2014-2015 ●
Glow plug 2014-2015 ●
Initial startup of SCR exhaust aftertreatment system
2014-2015 ●
Injection time 2014-2015 ●
Learning process: Move to vehicle level 2014-2015 ● ●
Learning, Foot throttle actuator 2014-2015 ●
27 (60)

Legal speed limit 2014-2015 ●


Level sensor test 2014-2015 ● ●
Major learning process for control module GS gear2014-2015
control ●
Measurment of all sensors 2014-2015 ●
Metering pump 2014-2015 ●
Minor learning process for control module GSII gear2014-2015
control ●
Parameter reading, Dashboard 2014-2015 ●
Parameter reading, Delay period of PTO switch 2014-2015 ●
Parameter reading, Engine 2014-2015 ● ●
Parameter reading, Exterior lamp switch 2014-2015 ●
Parameter reading, Fault properties 2014-2015 ●
Parameter reading, Headlamp range controller 2014-2015 ●
Parameter reading, Rear wall 2014-2015 ●
Parameter reading, Roof 2014-2015 ●
Parameter reading, Switch, Differential lock 2014-2015 ●
Parameter reading, Tire rolling circumference 2014-2015 ●
Parameter setting: Exterior lamp switch 2014-2015 ●
Parameter setting: Headlamp range controller 2014-2015 ●
Parameter setting: Switch, Differential lock 2014-2015 ●
Parameter settings,Engine: Extended oil change interval
2014-2015 ● ●
Parameter settings,Engine: Fuel quality 2014-2015 ● ●
Parameter settings,Engine: Maximum driving distance2014-2015 ● ●
Parameter settings,Engine: Maximum engine torque 2014-2015 ● ●
Parameter settings,Engine: Oil quality, sheet number
2014-2015 ● ●
Parameter settings,Engine: Oil viscosity 2014-2015 ● ●
Parameter settings: Dashboard 2014-2015 ●
Parameter settings: Delay period of PTO switch 2014-2015 ●
Parameter settings: Fault properties 2014-2015 ●
Parameter settings: Operation period of the compressed
2014-2015
air drier heater ●
Parameter settings: Rear wall 2014-2015 ●
Parameter settings: Roof 2014-2015 ●
Parameter settings: Tire rolling circumference of the
2014-2015
front axle ●
Parameter settings: Tire rolling circumference of the
2014-2015
rear axle ●
Parameter settings: Type of compressor 2014-2015 ●
Parameterization of Lane assistant camera 2014-2015 ●
Pressure sensors, Calibration 2014-2015 ● ●
Read vehicle control unit list 2014-2015 ●
Reading out additional information for SCR fault codes
2014-2015 ●
Re-learn terminal W ratio 2014-2015 ●
Reset fault memory bit 2014-2015 ●
Reset of cylinder balancing 2014-2015 ●
Reset service 2014-2015 ● ●
Selected Maximum Vehicle Speed Limit 2014-2015 ●
Solenoid valve, level control system, lower 3:rd axle
2014-2015 ● ●
Solenoid valve, level control system, ventilation 2014-2015 ● ●
Steering and learning of additional axle 2014-2015 ●
Test and data sheet 1 2014-2015 ● ●
Test and data sheet 2 2014-2015 ● ●
Test of AdBlue delivery circuit 2014-2015 ●
Test of AdBlue pump 2014-2015 ●
28 (60)

Test of AdBlue tank heater solenoid valve 2014-2015 ●


Test of SCR compressed air switching valve 2014-2015 ●
Transfer of base module parameters back from the2014-2015
mirror memory ●
Transfer of base module parameters to the mirror2014-2015
memory ●
Unit pump programming cylinder 1 2014-2015 ●
Unit pump programming cylinder 2 2014-2015 ●
Unit pump programming cylinder 3 2014-2015 ●
Unit pump programming cylinder 4 2014-2015 ●
Unit pump programming cylinder 5 2014-2015 ●
Unit pump programming cylinder 6 2014-2015 ●
Unit pump programming cylinder 7 2014-2015 ●
Unit pump programming cylinder 8 2014-2015 ●
Updating of control units: From ZDS to control units
2014-2015 ●
Updating of ZDS: From control units to ZDS 2014-2015 ●
Water pump 2014-2015 ●
Wheel speed sensor, rear axle left 2014-2015 ●
Wheel speed sensor, rear axle right 2014-2015 ●

Actros MP IV 2012-2015 ● ● ● ● ● ● ● ● ● ● ●
Actuation of ABS solenoid valves without output dynamometer
2012-2015 ●
Actuation of AdBlue delivery pump 2015 ●
Actuation of AdBlue heating element 2015 ●
Adaption Throttle valve actuator 2015 ●
Air distribution flap actuator motor 2015 ●
Blower motor speed level 2015 ●
Calibration by means of test drive 2015 ●
Calibration level sensors 2015 ●
Check pneumatic connections of component 'B17a2012-2015
(Brake value sensor)'
● for misconnection
Circulation coolant pump 2015 ●
Combustion air blower 2015 ●
Compression test 2015 ●
Cylinder deactivation 2015 ●
Defroster flap actuator motor 2015 ●
Exhaust gas recirculation 2015 ●
Flooding of retarder 2015 ●
Fresh air / Recirculation flap actuator motor 2015 ●
Fuel metering pump 2015 ●
Function test of countershaft brake 2015 ●
Function test of shift operation 2015 ●
Function test of splitter operations 2015 ●
Glow plug 2015 ●
Heating mode 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of aligned axles 2015 ●
Learning of clutch with manual gearbox 2015 ●
Legal speed limit 2015 ●
Level sensor test 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Parameter reading, Engine 2015 ● ●
Parameter settings,Engine: Fuel quality 2015 ● ●
29 (60)

Parameter settings,Engine: Maximum engine torque 2015 ● ●


Parameter settings,Engine: Oil quality, sheet number 2015 ● ●
Parameter settings,Engine: Oil viscosity 2015 ● ●
Parameterization of Lane assistant camera 2015 ●
Proportional valve test 2015 ●
Read vehicle control unit list 2015 ●
Refrigerant compressor magnetic clutch 2015 ●
Reset service 2015 ● ●
Solenoid valve test 2015 ●
Steering and learning of additional axle 2015 ●
Switchover of function ASR (Acceleration Slip Regulation)
2012-2015 ●
Temperature control 2015 ●
Test and data sheet 1 2015 ● ●
Test of Adblue metering amount 2015 ●
Test of clutch 2015 ●
Test of NOx sensors 2015 ●
Test of redundancy circuit of front axle 2012-2015 ●
Test of redundancy circuit of rear axle 2012-2015 ●
Trailer control valve 2012-2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
Unit pump programming cylinder 5 2015 ●
Unit pump programming cylinder 6 2015 ●
Updating of CDS: From control units to CDS 2015 ●
Updating of control units: From CDS to control units 2015 ●

Antos 2013-2015 ● ● ● ● ● ● ● ● ● ● ●
Actuation of ABS solenoid valves without output dynamometer
2013-2015 ●
Actuation of AdBlue delivery pump 2015 ●
Actuation of AdBlue heating element 2015 ●
AdBlue® heater, coolant solenoid valve 2015 ●
Air distribution flap actuator motor 2015 ●
Blower motor speed level 2015 ●
Boost pressure regulator 2015 ●
Calibration by means of test drive 2015 ●
Calibration level sensors 2015 ●
Check pneumatic connections of component 'B17a2013-2015
(Brake value sensor)'
● for misconnection
Compression test 2015 ●
Cylinder deactivation 2015 ●
Defroster flap actuator motor 2015 ●
Engine brake solenoid valve, stage 1 2015 ●
Engine brake solenoid valve, stage 2 2015 ●
Exhaust Gas Recirculation controller 2015 ●
Fan clutch solenoid valve 2015 ●
Fresh air / Recirculation flap actuator motor 2015 ●
Fuel Metering Solenoid Valve 2015 ●
Fuel shutoff valve 2015 ●
Function test of countershaft brake 2015 ●
30 (60)

Function test of shift operation 2015 ●


Function test of splitter operations 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of aligned axles 2015 ●
Learning of clutch with manual gearbox 2015 ●
Legal speed limit 2015 ●
Level sensor test 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Parameter reading, Engine 2015 ● ●
Parameter settings,Engine: Fuel quality 2015 ● ●
Parameter settings,Engine: Maximum engine torque 2015 ● ●
Parameter settings,Engine: Oil quality, sheet number 2015 ● ●
Parameter settings,Engine: Oil viscosity 2015 ● ●
Parameterization of Lane assistant camera 2015 ●
Read vehicle control unit list 2015 ●
Refrigerant compressor magnetic clutch 2015 ●
Reset service 2015 ● ●
Solenoid valve test 2015 ●
Steering and learning of additional axle 2015 ●
Switched water pump solenoid valve 2015 ●
Switchover of function ASR (Acceleration Slip Regulation)
2013-2015 ●
Temperature control 2015 ●
Test and data sheet 1 2015 ● ●
Test of Adblue metering amount 2015 ●
Test of clutch 2015 ●
Test of NOx sensors 2015 ●
Test of redundancy circuit of front axle 2013-2015 ●
Test of redundancy circuit of rear axle 2013-2015 ●
Trailer control valve 2013-2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
Unit pump programming cylinder 5 2015 ●
Unit pump programming cylinder 6 2015 ●
Updating of CDS: From control units to CDS 2015 ●
Updating of control units: From CDS to control units 2015 ●

Arocs 2013-2015 ● ● ● ● ● ● ● ● ● ● ●
Actuation of ABS solenoid valves without output dynamometer
2013-2015 ●
Actuation of AdBlue delivery pump 2015 ●
Actuation of AdBlue heating element 2015 ●
AdBlue® heater, coolant solenoid valve 2015 ●
Boost pressure regulator 2015 ●
Calibration by means of test drive 2015 ●
Calibration level sensors 2015 ●
Check pneumatic connections of component 'B17a2013-2015
(Brake value sensor)'
● for misconnection
Compression test 2015 ●
Cylinder deactivation 2015 ●
Engine brake solenoid valve, stage 1 2015 ●
31 (60)

Engine brake solenoid valve, stage 2 2015 ●


Exhaust Gas Recirculation controller 2015 ●
Fan clutch solenoid valve 2015 ●
Fuel Metering Solenoid Valve 2015 ●
Fuel shutoff valve 2015 ●
Function test of countershaft brake 2015 ●
Function test of shift operation 2015 ●
Function test of splitter operations 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of aligned axles 2015 ●
Learning of clutch with manual gearbox 2015 ●
Legal speed limit 2015 ●
Level sensor test 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Parameter reading, Engine 2015 ● ●
Parameter settings,Engine: Fuel quality 2015 ● ●
Parameter settings,Engine: Maximum engine torque 2015 ● ●
Parameter settings,Engine: Oil quality, sheet number 2015 ● ●
Parameter settings,Engine: Oil viscosity 2015 ● ●
Parameterization of Lane assistant camera 2015 ●
Reset service 2015 ● ●
Solenoid valve test 2015 ●
Steering and learning of additional axle 2015 ●
Switched water pump solenoid valve 2015 ●
Switchover of function ASR (Acceleration Slip Regulation)
2013-2015 ●
Test and data sheet 1 2015 ● ●
Test of Adblue metering amount 2015 ●
Test of clutch 2015 ●
Test of NOx sensors 2015 ●
Test of redundancy circuit of front axle 2013-2015 ●
Test of redundancy circuit of rear axle 2013-2015 ●
Trailer control valve 2013-2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
Unit pump programming cylinder 5 2015 ●
Unit pump programming cylinder 6 2015 ●

Atego III 2013-2015 ● ● ● ● ● ● ● ●


Actuation of ABS solenoid valves with brake test stand 2015 ●
Actuation of ABS solenoid valves without output dynamometer
2013-2015 ●
Actuation of AdBlue delivery pump 2015 ●
Actuation of AdBlue heating element 2015 ●
AdBlue® heater, coolant solenoid valve 2015 ●
Boost pressure regulator 2015 ●
Calibration level sensors 2015 ●
Check pneumatic connections of component 'B17a2013-2015
(Brake value sensor)'
● for misconnection
Check speed sensors 2015 ●
Compression test 2015 ●
32 (60)

Cylinder deactivation 2015 ●


Engine brake solenoid valve, stage 1 2015 ●
Engine brake solenoid valve, stage 2 2015 ●
Exhaust Gas Recirculation controller 2015 ●
Fan clutch solenoid valve 2015 ●
Fuel Metering Solenoid Valve 2015 ●
Fuel shutoff valve 2015 ●
Function test of countershaft brake 2015 ●
Function test of shift operation 2015 ●
Function test of splitter operations 2015 ●
Leak test of AdBlue metering device 2015 ●
Learning of clutch with manual gearbox 2015 ●
Legal speed limit 2015 ●
Level sensor test 2015 ●
Manual regeneration of diesel particulate filter 2015 ●
Parameter reading, Engine 2015 ● ●
Parameter settings,Engine: Fuel quality 2015 ● ●
Parameter settings,Engine: Maximum engine torque 2015 ● ●
Parameter settings,Engine: Oil quality, sheet number 2015 ● ●
Parameter settings,Engine: Oil viscosity 2015 ● ●
Reset service 2015 ● ●
Solenoid valve test 2015 ●
Switched water pump solenoid valve 2015 ●
Switchover of function ASR (Acceleration Slip Regulation)
2013-2015 ●
Test and data sheet 1 2015 ● ●
Test of Adblue metering amount 2015 ●
Test of clutch 2015 ●
Test of NOx sensors 2015 ●
Test of redundancy circuit of front axle 2013-2015 ●
Test of redundancy circuit of rear axle 2013-2015 ●
Trailer control valve 2013-2015 ●
Unit pump programming cylinder 1 2015 ●
Unit pump programming cylinder 2 2015 ●
Unit pump programming cylinder 3 2015 ●
Unit pump programming cylinder 4 2015 ●
Unit pump programming cylinder 5 2015 ●
Unit pump programming cylinder 6 2015 ●

Mercedes Truck South America


Actros MP II 2002-2008 ● ● ● ● ● ● ● ● ● ●
Actuation of clutch operator. Only on models with2002-2008
control unit GS. ●
Calibration level sensors 2002-2008 ● ●
Change onboard reset 2002-2008 ● ●
Check metering quantity of AdBlue metering unit 2002-2008 ●
Cleaning of AdBlue metering unit 2002-2008 ●
Clear alarmcause memory 2002-2008 ●
Clutch adjustment automatic gearbox 2002-2008 ●
Combustion air blower 2002-2008 ●
33 (60)

Compression test 2002-2008 ●


Cylinder Balancing 2002-2008 ●
Enter VIN-code 17 characters 2002-2008 ●
Glow plug 2002-2008 ●
Initial startup of SCR exhaust aftertreatment system
2002-2008 ●
Injection time 2002-2008 ●
Learning process: Move to vehicle level 2002-2008 ● ●
Learning, Foot throttle actuator 2002-2008 ●
Legal speed limit 2002-2008 ●
Level sensor test 2002-2008 ● ●
Major learning process for control module GS gear2002-2008
control ●
Measurment of all sensors 2002-2008 ●
Metering pump 2002-2008 ●
Minor learning process for control module GSII gear2002-2008
control ●
Parameter reading, Dashboard 2002-2008 ●
Parameter reading, Delay period of PTO switch 2002-2008 ●
Parameter reading, Engine 2002-2008 ● ●
Parameter reading, Exterior lamp switch 2002-2008 ●
Parameter reading, Fault properties 2002-2008 ●
Parameter reading, Headlamp range controller 2002-2008 ●
Parameter reading, Rear wall 2002-2008 ●
Parameter reading, Roof 2002-2008 ●
Parameter reading, Switch, Differential lock 2002-2008 ●
Parameter reading, Tire rolling circumference 2002-2008 ●
Parameter setting: Exterior lamp switch 2002-2008 ●
Parameter setting: Headlamp range controller 2002-2008 ●
Parameter setting: Switch, Differential lock 2002-2008 ●
Parameter settings,Engine: Extended oil change interval
2002-2008 ● ●
Parameter settings,Engine: Fuel quality 2002-2008 ● ●
Parameter settings,Engine: Maximum driving distance2002-2008 ● ●
Parameter settings,Engine: Maximum engine torque 2002-2008 ● ●
Parameter settings,Engine: Oil quality, sheet number
2002-2008 ● ●
Parameter settings,Engine: Oil viscosity 2002-2008 ● ●
Parameter settings: Dashboard 2002-2008 ●
Parameter settings: Delay period of PTO switch 2002-2008 ●
Parameter settings: Fault properties 2002-2008 ●
Parameter settings: Rear wall 2002-2008 ●
Parameter settings: Roof 2002-2008 ●
Parameter settings: Tire rolling circumference of the
2002-2008
front axle ●
Parameter settings: Tire rolling circumference of the
2002-2008
rear axle ●
Parameterization of Lane assistant camera 2002-2008 ●
Pressure sensors, Calibration 2002-2008 ● ●
Read vehicle control unit list 2002-2008 ●
Reading out additional information for SCR fault codes
2002-2008 ●
Re-learn terminal W ratio 2002-2008 ●
Reset fault memory bit 2002-2008 ●
Reset of cylinder balancing 2002-2008 ●
Reset service 2002-2008 ● ●
Selected Maximum Vehicle Speed Limit 2002-2008 ●
Solenoid valve, level control system, lower 3:rd axle
2002-2008 ● ●
34 (60)

Solenoid valve, level control system, ventilation 2002-2008 ● ●


Steering and learning of additional axle 2002-2008 ●
Test and data sheet 1 2002-2008 ● ●
Test and data sheet 2 2002-2008 ● ●
Test of AdBlue delivery circuit 2002-2008 ●
Test of AdBlue pump 2002-2008 ●
Test of AdBlue tank heater solenoid valve 2002-2008 ●
Test of SCR compressed air switching valve 2002-2008 ●
Transfer of base module parameters back from the2002-2008
mirror memory ●
Transfer of base module parameters to the mirror2002-2008
memory ●
Unit pump programming cylinder 1 2002-2008 ●
Unit pump programming cylinder 2 2002-2008 ●
Unit pump programming cylinder 3 2002-2008 ●
Unit pump programming cylinder 4 2002-2008 ●
Unit pump programming cylinder 5 2002-2008 ●
Unit pump programming cylinder 6 2002-2008 ●
Unit pump programming cylinder 7 2002-2008 ●
Unit pump programming cylinder 8 2002-2008 ●
Updating of control units: From ZDS to control units
2002-2008 ●
Updating of ZDS: From control units to ZDS 2002-2008 ●
Water pump 2002-2008 ●
Wheel speed sensor, rear axle left 2002-2008 ●
Wheel speed sensor, rear axle right 2002-2008 ●

Actros 1997-2002 ● ● ● ● ● ● ● ● ● ●
Actuation of clutch operator. Only on models with1997-2002
control unit GS. ●
Calibration level sensors 1997-2002 ●
Change onboard reset 1997-2002 ● ●
Check metering quantity of AdBlue metering unit 1997-2002 ●
Cleaning of AdBlue metering unit 1997-2002 ●
Clutch calibration with lining change 1997-2002 ●
Clutch calibration without lining change 1997-2002 ●
Clutch wear check, test 1997-2002 ●
Compression test 1997-2002 ●
Cylinder Balancing 1997-2002 ●
Initial startup of SCR exhaust aftertreatment system
1997-2002 ●
Injection time 1997-2002 ●
Learning process for control module GS (EPS) 1997-2002 ●
Learning process: Move to vehicle level 1997-2002 ●
Learning, Foot throttle actuator 1997-2002 ●
Legal speed limit 1997-2002 ●
Major learning process for control module GS gear1997-2002
control ●
Measurment of all sensors 1997-2002 ●
Parameter reading, Engine 1997-2002 ● ●
Parameter reading, Tire rolling circumference 1997-2002 ●
Parameter settings,Engine: Fuel quality 1997-2002 ● ●
Parameter settings,Engine: Longlife filter 1997-2002 ● ●
Parameter settings,Engine: Maximum driving distance1997-2002 ● ●
Parameter settings,Engine: Oil quality, sheet number
1997-2002 ● ●
Parameter settings,Engine: Oil viscosity 1997-2002 ● ●
35 (60)

Parameter settings: Tire rolling circumference of the


1997-2002
front axle ●
Parameter settings: Tire rolling circumference of the
1997-2002
rear axle ●
Parameterization of Lane assistant camera 1997-2002 ●
Pressure sensor calibration 1997-2002 ●
Read vehicle control unit list 1997-2002 ●
Reading out additional information for SCR fault codes
1997-2002 ●
Re-learn splitter ratio. Only on models without control
1997-2002
unit GS. ●
Re-learn terminal W ratio 1997-2002 ●
Reset fault memory bit 1997-2002 ●
Reset of cylinder balancing 1997-2002 ●
Reset service 1997-2002 ● ●
Selected Maximum Vehicle Speed Limit 1997-2002 ●
Test and data sheet 1 1997-2002 ● ●
Test and data sheet 2 1997-2002 ● ●
Test of AdBlue delivery circuit 1997-2002 ●
Test of AdBlue pump 1997-2002 ●
Test of AdBlue tank heater solenoid valve 1997-2002 ●
Test of SCR compressed air switching valve 1997-2002 ●
Unit pump programming cylinder 1 1997-2002 ●
Unit pump programming cylinder 2 1997-2002 ●
Unit pump programming cylinder 3 1997-2002 ●
Unit pump programming cylinder 4 1997-2002 ●
Unit pump programming cylinder 5 1997-2002 ●
Unit pump programming cylinder 6 1997-2002 ●
Unit pump programming cylinder 7 1997-2002 ●
Unit pump programming cylinder 8 1997-2002 ●

Atego 1998-2003 ● ● ● ●
Actuation of clutch operator. Only on models with1998-2002
control unit GS. ●
Check metering quantity of AdBlue metering unit 1998-2003 ●
Cleaning of AdBlue metering unit 1998-2003 ●
Clutch calibration with lining change 1998-2002 ●
Clutch calibration without lining change 1998-2002 ●
Clutch wear check, test 1998-2002 ●
Compression test 1998-2003 ●
Cylinder Balancing 1998-2003 ●
Initial startup of SCR exhaust aftertreatment system
1998-2003 ●
Injection time 1998-2003 ●
Learning, Foot throttle actuator 1998-2002 ●
Legal speed limit 1998-2002 ●
Measurment of all sensors 1998-2002 ●
Parameter reading, Tire rolling circumference 1998-2003 ●
Parameter settings: Tire rolling circumference of the
1998-2003
front axle ●
Parameter settings: Tire rolling circumference of the
1998-2003
rear axle ●
Read vehicle control unit list 1998-2003 ●
Reading out additional information for SCR fault codes
1998-2003 ●
Re-learn splitter ratio. Only on models without control
1998-2002
unit GS. ●
Re-learn terminal W ratio 1998-2002 ●
Reset of cylinder balancing 1998-2003 ●
Selected Maximum Vehicle Speed Limit 1998-2002 ●
36 (60)

Test of AdBlue delivery circuit 1998-2003 ●


Test of AdBlue pump 1998-2003 ●
Test of AdBlue tank heater solenoid valve 1998-2003 ●
Test of SCR compressed air switching valve 1998-2003 ●
Unit pump programming cylinder 1 1998-2003 ●
Unit pump programming cylinder 2 1998-2003 ●
Unit pump programming cylinder 3 1998-2003 ●
Unit pump programming cylinder 4 1998-2003 ●
Unit pump programming cylinder 5 1998-2003 ●
Unit pump programming cylinder 6 1998-2003 ●
Unit pump programming cylinder 7 1998-2003 ●
Unit pump programming cylinder 8 1998-2003 ●

Atego II 2004-2015 ● ● ● ●
Actuation of clutch operator. Only on models with2004-2015
control unit GS. ●
Check metering quantity of AdBlue metering unit 2004-2015 ●
Cleaning of AdBlue metering unit 2004-2015 ●
Clutch calibration with lining change 2004-2015 ●
Clutch calibration without lining change 2004-2015 ●
Clutch wear check, test 2004-2015 ●
Compression test 2004-2015 ●
Cylinder Balancing 2004-2015 ●
Initial startup of SCR exhaust aftertreatment system
2004-2015 ●
Injection time 2004-2015 ●
Learning, Foot throttle actuator 2004-2015 ●
Legal speed limit 2004-2015 ●
Measurment of all sensors 2004-2015 ●
Parameter reading, Tire rolling circumference 2004-2015 ●
Parameter settings: Tire rolling circumference of the
2004-2015
front axle ●
Parameter settings: Tire rolling circumference of the
2004-2015
rear axle ●
Read vehicle control unit list 2004-2015 ●
Reading out additional information for SCR fault codes
2004-2015 ●
Re-learn splitter ratio. Only on models without control
2004-2015
unit GS. ●
Re-learn terminal W ratio 2004-2015 ●
Reset of cylinder balancing 2004-2015 ●
Selected Maximum Vehicle Speed Limit 2004-2015 ●
Test of AdBlue delivery circuit 2004-2015 ●
Test of AdBlue pump 2004-2015 ●
Test of AdBlue tank heater solenoid valve 2004-2015 ●
Test of SCR compressed air switching valve 2004-2015 ●
Unit pump programming cylinder 1 2004-2015 ●
Unit pump programming cylinder 2 2004-2015 ●
Unit pump programming cylinder 3 2004-2015 ●
Unit pump programming cylinder 4 2004-2015 ●
Unit pump programming cylinder 5 2004-2015 ●
Unit pump programming cylinder 6 2004-2015 ●
Unit pump programming cylinder 7 2004-2015 ●
Unit pump programming cylinder 8 2004-2015 ●

Axor 2001-2003 ● ● ● ● ● ● ● ● ●
37 (60)

Actuation of clutch operator. Only on models with2001-2003


control unit GS. ●
Calibration level sensors 2001-2003 ●
Change onboard reset 2001-2003 ● ●
Check metering quantity of AdBlue metering unit 2001-2003 ●
Cleaning of AdBlue metering unit 2001-2003 ●
Clutch calibration with lining change 2001-2003 ●
Clutch calibration without lining change 2001-2003 ●
Clutch wear check, test 2001-2003 ●
Compression test 2001-2003 ●
Cylinder Balancing 2001-2003 ●
Initial startup of SCR exhaust aftertreatment system
2001-2003 ●
Injection time 2001-2003 ●
Learning process for control module GS (EPS) 2001-2003 ●
Learning process: Move to vehicle level 2001-2003 ●
Learning, Foot throttle actuator 2001-2003 ●
Legal speed limit 2001-2003 ●
Major learning process for control module GS gear2001-2003
control ●
Measurment of all sensors 2001-2003 ●
Parameter reading, Engine 2001-2003 ● ●
Parameter reading, Tire rolling circumference 2001-2003 ●
Parameter settings,Engine: Fuel quality 2001-2003 ● ●
Parameter settings,Engine: Longlife filter 2001-2003 ● ●
Parameter settings,Engine: Maximum driving distance2001-2003 ● ●
Parameter settings,Engine: Oil quality, sheet number
2001-2003 ● ●
Parameter settings,Engine: Oil viscosity 2001-2003 ● ●
Parameter settings: Tire rolling circumference of the
2001-2003
front axle ●
Parameter settings: Tire rolling circumference of the
2001-2003
rear axle ●
Pressure sensor calibration 2001-2003 ●
Read vehicle control unit list 2001-2003 ●
Reading out additional information for SCR fault codes
2001-2003 ●
Re-learn splitter ratio. Only on models without control
2001-2003
unit GS. ●
Re-learn terminal W ratio 2001-2003 ●
Reset fault memory bit 2001-2003 ●
Reset of cylinder balancing 2001-2003 ●
Reset service 2001-2003 ● ●
Selected Maximum Vehicle Speed Limit 2001-2003 ●
Test and data sheet 1 2001-2003 ● ●
Test and data sheet 2 2001-2003 ● ●
Test of AdBlue delivery circuit 2001-2003 ●
Test of AdBlue pump 2001-2003 ●
Test of AdBlue tank heater solenoid valve 2001-2003 ●
Test of SCR compressed air switching valve 2001-2003 ●
Unit pump programming cylinder 1 2001-2003 ●
Unit pump programming cylinder 2 2001-2003 ●
Unit pump programming cylinder 3 2001-2003 ●
Unit pump programming cylinder 4 2001-2003 ●
Unit pump programming cylinder 5 2001-2003 ●
Unit pump programming cylinder 6 2001-2003 ●
Unit pump programming cylinder 7 2001-2003 ●
Unit pump programming cylinder 8 2001-2003 ●
38 (60)

Axor II 2004-2015 ● ● ● ● ● ● ● ●
Actuation of clutch operator. Only on models with2004-2015
control unit GS. ●
Calibration level sensors 2004-2015 ●
Change onboard reset 2004-2015 ● ●
Check metering quantity of AdBlue metering unit 2004-2015 ●
Cleaning of AdBlue metering unit 2004-2015 ●
Clutch calibration with lining change 2004-2015 ●
Clutch calibration without lining change 2004-2015 ●
Clutch wear check, test 2004-2015 ●
Compression test 2004-2015 ●
Cylinder Balancing 2004-2015 ●
Initial startup of SCR exhaust aftertreatment system
2004-2015 ●
Injection time 2004-2015 ●
Learning process for control module GS (EPS) 2004-2015 ●
Learning process: Move to vehicle level 2004-2015 ●
Learning, Foot throttle actuator 2004-2015 ●
Legal speed limit 2004-2015 ●
Major learning process for control module GS gear2004-2015
control ●
Measurment of all sensors 2004-2015 ●
Parameter reading, Engine 2004-2015 ● ●
Parameter reading, Tire rolling circumference 2004-2015 ●
Parameter settings,Engine: Fuel quality 2004-2015 ● ●
Parameter settings,Engine: Longlife filter 2004-2015 ● ●
Parameter settings,Engine: Maximum driving distance2004-2015 ● ●
Parameter settings,Engine: Oil quality, sheet number
2004-2015 ● ●
Parameter settings,Engine: Oil viscosity 2004-2015 ● ●
Parameter settings: Tire rolling circumference of the
2004-2015
front axle ●
Parameter settings: Tire rolling circumference of the
2004-2015
rear axle ●
Pressure sensor calibration 2004-2015 ●
Read vehicle control unit list 2004-2015 ●
Reading out additional information for SCR fault codes
2004-2015 ●
Re-learn splitter ratio. Only on models without control
2004-2015
unit GS. ●
Re-learn terminal W ratio 2004-2015 ●
Reset fault memory bit 2004-2015 ●
Reset of cylinder balancing 2004-2015 ●
Reset service 2004-2015 ● ●
Selected Maximum Vehicle Speed Limit 2004-2015 ●
Test and data sheet 1 2004-2015 ● ●
Test and data sheet 2 2004-2015 ● ●
Test of AdBlue delivery circuit 2004-2015 ●
Test of AdBlue pump 2004-2015 ●
Test of AdBlue tank heater solenoid valve 2004-2015 ●
Test of SCR compressed air switching valve 2004-2015 ●
Unit pump programming cylinder 1 2004-2015 ●
Unit pump programming cylinder 2 2004-2015 ●
Unit pump programming cylinder 3 2004-2015 ●
Unit pump programming cylinder 4 2004-2015 ●
Unit pump programming cylinder 5 2004-2015 ●
Unit pump programming cylinder 6 2004-2015 ●
39 (60)

Unit pump programming cylinder 7 2004-2015 ●


Unit pump programming cylinder 8 2004-2015 ●

Actros MP III 2009-2015 ● ● ● ● ● ● ● ● ● ●


Actuation of clutch operator. Only on models with2009-2015
control unit GS. ●
Calibration level sensors 2009-2015 ● ●
Change onboard reset 2009-2015 ● ●
Check metering quantity of AdBlue metering unit 2009-2015 ●
Cleaning of AdBlue metering unit 2009-2015 ●
Clear alarmcause memory 2009-2015 ●
Clutch adjustment automatic gearbox 2009-2015 ●
Combustion air blower 2009-2015 ●
Compression test 2009-2015 ●
Cylinder Balancing 2009-2015 ●
Enter VIN-code 17 characters 2009-2015 ●
Glow plug 2009-2015 ●
Initial startup of SCR exhaust aftertreatment system
2009-2015 ●
Injection time 2009-2015 ●
Learning process: Move to vehicle level 2009-2015 ● ●
Learning, Foot throttle actuator 2009-2015 ●
Legal speed limit 2009-2015 ●
Level sensor test 2009-2015 ● ●
Major learning process for control module GS gear2009-2015
control ●
Measurment of all sensors 2009-2015 ●
Metering pump 2009-2015 ●
Minor learning process for control module GSII gear2009-2015
control ●
Parameter reading, Dashboard 2009-2015 ●
Parameter reading, Delay period of PTO switch 2009-2015 ●
Parameter reading, Engine 2009-2015 ● ●
Parameter reading, Exterior lamp switch 2009-2015 ●
Parameter reading, Fault properties 2009-2015 ●
Parameter reading, Headlamp range controller 2009-2015 ●
Parameter reading, Rear wall 2009-2015 ●
Parameter reading, Roof 2009-2015 ●
Parameter reading, Switch, Differential lock 2009-2015 ●
Parameter reading, Tire rolling circumference 2009-2015 ●
Parameter setting: Exterior lamp switch 2009-2015 ●
Parameter setting: Headlamp range controller 2009-2015 ●
Parameter setting: Switch, Differential lock 2009-2015 ●
Parameter settings,Engine: Extended oil change interval
2009-2015 ● ●
Parameter settings,Engine: Fuel quality 2009-2015 ● ●
Parameter settings,Engine: Maximum driving distance2009-2015 ● ●
Parameter settings,Engine: Maximum engine torque 2009-2015 ● ●
Parameter settings,Engine: Oil quality, sheet number
2009-2015 ● ●
Parameter settings,Engine: Oil viscosity 2009-2015 ● ●
Parameter settings: Dashboard 2009-2015 ●
Parameter settings: Delay period of PTO switch 2009-2015 ●
Parameter settings: Fault properties 2009-2015 ●
Parameter settings: Operation period of the compressed
2009-2015
air drier heater ●
Parameter settings: Rear wall 2009-2015 ●
40 (60)

Parameter settings: Roof 2009-2015 ●


Parameter settings: Tire rolling circumference of the
2009-2015
front axle ●
Parameter settings: Tire rolling circumference of the
2009-2015
rear axle ●
Parameter settings: Type of compressor 2009-2015 ●
Parameterization of Lane assistant camera 2009-2015 ●
Pressure sensors, Calibration 2009-2015 ● ●
Read vehicle control unit list 2009-2015 ●
Reading out additional information for SCR fault codes
2009-2015 ●
Re-learn terminal W ratio 2009-2015 ●
Reset fault memory bit 2009-2015 ●
Reset of cylinder balancing 2009-2015 ●
Reset service 2009-2015 ● ●
Selected Maximum Vehicle Speed Limit 2009-2015 ●
Solenoid valve, level control system, lower 3:rd axle
2009-2015 ● ●
Solenoid valve, level control system, ventilation 2009-2015 ● ●
Steering and learning of additional axle 2009-2015 ●
Test and data sheet 1 2009-2015 ● ●
Test and data sheet 2 2009-2015 ● ●
Test of AdBlue delivery circuit 2009-2015 ●
Test of AdBlue pump 2009-2015 ●
Test of AdBlue tank heater solenoid valve 2009-2015 ●
Test of SCR compressed air switching valve 2009-2015 ●
Transfer of base module parameters back from the2009-2015
mirror memory ●
Transfer of base module parameters to the mirror2009-2015
memory ●
Unit pump programming cylinder 1 2009-2015 ●
Unit pump programming cylinder 2 2009-2015 ●
Unit pump programming cylinder 3 2009-2015 ●
Unit pump programming cylinder 4 2009-2015 ●
Unit pump programming cylinder 5 2009-2015 ●
Unit pump programming cylinder 6 2009-2015 ●
Unit pump programming cylinder 7 2009-2015 ●
Unit pump programming cylinder 8 2009-2015 ●
Updating of control units: From ZDS to control units
2009-2015 ●
Updating of ZDS: From control units to ZDS 2009-2015 ●
Water pump 2009-2015 ●
Wheel speed sensor, rear axle left 2009-2015 ●
Wheel speed sensor, rear axle right 2009-2015 ●

Accelo 2005-2015 ● ● ●
Actuation of clutch operator. Only on models with2010-2015
control unit GS. ●
Check metering quantity of AdBlue metering unit 2005-2015 ●
Cleaning of AdBlue metering unit 2005-2015 ●
Clutch calibration with lining change 2010-2015 ●
Clutch calibration without lining change 2010-2015 ●
Clutch wear check, test 2010-2015 ●
Compression test 2005-2015 ●
Cylinder Balancing 2005-2015 ●
Initial startup of SCR exhaust aftertreatment system
2005-2015 ●
Injection time 2005-2015 ●
Learning, Foot throttle actuator 2010-2015 ●
41 (60)

Legal speed limit 2010-2015 ●


Measurment of all sensors 2010-2015 ●
Read vehicle control unit list 2010-2015 ●
Reading out additional information for SCR fault codes
2005-2015 ●
Re-learn splitter ratio. Only on models without control
2010-2015
unit GS. ●
Re-learn terminal W ratio 2010-2015 ●
Reset of cylinder balancing 2005-2015 ●
Selected Maximum Vehicle Speed Limit 2010-2015 ●
Test of AdBlue delivery circuit 2005-2015 ●
Test of AdBlue pump 2005-2015 ●
Test of AdBlue tank heater solenoid valve 2005-2015 ●
Test of SCR compressed air switching valve 2005-2015 ●
Unit pump programming cylinder 1 2005-2015 ●
Unit pump programming cylinder 2 2005-2015 ●
Unit pump programming cylinder 3 2005-2015 ●
Unit pump programming cylinder 4 2005-2015 ●
Unit pump programming cylinder 5 2010-2015 ●
Unit pump programming cylinder 6 2010-2015 ●
Unit pump programming cylinder 7 2010-2015 ●
Unit pump programming cylinder 8 2010-2015 ●

Atron 2008-2013 ● ●
Check metering quantity of AdBlue metering unit 2008-2013 ●
Cleaning of AdBlue metering unit 2008-2013 ●
Compression test 2008-2013 ●
Cylinder Balancing 2008-2013 ●
Initial startup of SCR exhaust aftertreatment system
2008-2013 ●
Injection time 2008-2013 ●
Reading out additional information for SCR fault codes
2008-2013 ●
Reset of cylinder balancing 2008-2013 ●
Test of AdBlue delivery circuit 2008-2013 ●
Test of AdBlue pump 2008-2013 ●
Test of AdBlue tank heater solenoid valve 2008-2013 ●
Test of SCR compressed air switching valve 2008-2013 ●
Unit pump programming cylinder 1 2008-2013 ●
Unit pump programming cylinder 2 2008-2013 ●
Unit pump programming cylinder 3 2008-2013 ●
Unit pump programming cylinder 4 2008-2013 ●

Nissan
Primastar 2002-2003 ●
Adaptives after injector replacement 2002-2003 ●
EGR programming cut off 2002-2003 ●

Interstar X70 2002-2010 ●


Adaptives after injector replacement 2002-2010 ●
EGR programming cut off 2002-2010 ●
42 (60)

Primastar X83 [04-] 2004-2013 ●


Adaptives after injector replacement 2004-2013 ●
EGR programming cut off 2004-2013 ●

Navara D40 [05-] 2005-2013 ●


Adaptives after replacing particle filter 2005-2010 ●
Particle filter regeneration 2005-2013 ●

Opel/Vauxhall
Astra H 2006-2014 ●
Calibration stepper motors 2012-2014 ●

Vivaro 2011-2015 ● ●
Clutch bleed 2011-2014 ●
Empty the accumulator 2011-2012 ●
Gearbox learning 2011-2012 ●
Hydraulic components replacement 2011-2012 ●
Hydraulic unit replacement 2011-2012 ●
Learning clutch movement 2011-2014 ●
Learning of wheel sensor ID 2015 ●
Program the clutch hydraulic system 2011-2014 ●
Programing of wheel sensor ID 2015 ●
Programming the control unit 2011-2014 ●
Read configurations 2015 ●

Zafira B 2006-2009 ●
Calibration stepper motors 2006-2009 ●

Optare
Olympus 2008-2011 ●
Read data from ECU and save data to file 2008-2011 ●
Write data to ECU from file 2008-2011 ●

OmniDekka 2008-2011 ●
Read data from ECU and save data to file 2008-2011 ●
Write data to ECU from file 2008-2011 ●

Esteem 2008-2009 ●
Read data from ECU and save data to file 2008-2009 ●
Write data to ECU from file 2008-2009 ●

Peugeot
Boxer Serie 3 [06-] 2006-2015 ●
43 (60)

Expert Serie 3 2014-2015 ●


Front left wheel learning 2014-2015 ●
Front right wheel learning 2014-2015 ●
Programing of wheel sensor ID 2014-2015 ●
Rear left wheel learning 2014-2015 ●
Rear right wheel learning 2014-2015 ●

Plaxton
Panther 2005-2010 ● ●
Read data from ECU and save data to file 2005-2010 ●
Write data to ECU from file 2005-2010 ●

Paragon 2005-2010 ● ●
Read data from ECU and save data to file 2005-2010 ●
Write data to ECU from file 2005-2010 ●

Renault
Kangoo II 2008-2014 ● ●
Actuators sequential control 2010-2014 ●
Adaptives after injector replacement 2008-2014 ●
Air conditioning with wire connection 2010-2014 ●
Air conditioning without wire connection 2010-2014 ●
B1 brake control solenoid valve 2010-2014 ●
B2 brake control solenoid valve 2010-2014 ●
Brake solenoid valve 1 2010-2014 ●
Brake solenoid valve 2 2010-2014 ●
Clutch motor cycle 2010-2014 ●
Clutch solenoid valve 1 2010-2014 ●
Clutch solenoid valve 2 2010-2014 ●
Clutch solenoid valve 3 2010-2014 ●
EGR programming cut off 2008-2012 ●
Erase auto-adaptives 2010-2014 ●
Erase converter lock up adaptive 2010-2014 ●
Erase OBD memory 2010-2014 ●
Gear lever locking control solenoid valve 2010-2014 ●
K2 clutch control solenoid valve 2010-2014 ●
K3 clutch control solenoid valve 2010-2014 ●
Line pressure regulation solenoid valve 2010-2014 ●
Load sensing pressure regulation solenoid valve 2010-2014 ●
Program clutch open position 2010-2014 ●
Programming clutch point 2010-2014 ●
Programming selection/engaging zones 2010-2014 ●
Read configurations 2010-2014 ●
Reset: Shutdown of hydraulics during work 2010-2014 ●
Selector lever locking electromagnet 2010-2014 ●
44 (60)

Sequence 1 solenoid valve 2010-2014 ●


Sequence 2 solenoid valve 2010-2014 ●
Shift drum motor 2010-2014 ●
Shift drum reference position 2010-2014 ●
Shift transmission to neutral 2010-2014 ●
Shutting off hydraulics during work 2010-2014 ●
SLC1 (Linear solenoid valve - clutch 1) 2010-2014 ●
Solenoid valve control sequence 1 2010-2014 ●
Solenoid valve control sequence 2 2010-2014 ●
Start actuator sequential control 2010-2014 ●
Stop actuator sequential control 2010-2014 ●
With check motor torque by ABS 2010-2014 ●
With selector lever locking 2010-2014 ●
With trajectory control 2010-2014 ●
Without check motor torque by ABS 2010-2014 ●
Without selector lever locking 2010-2014 ●
Without trajectory control 2010-2014 ●
Write date new clutch fitted 2010-2014 ●
Write date of last after sales operation 2010-2014 ●
Write transmission oil change date 2010-2014 ●

Master III 2010-2014 ●


Adaptives after injector replacement 2010-2014 ●

Trafic III 2014 ●


Adaptives after injector replacement 2014 ●

Trafic II 2001-2013 ●
Adaptives after injector replacement 2001-2013 ●
EGR programming cut off 2001-2013 ●

Kangoo I 1998-2008 ●
Adaptives after injector replacement 1998-2008 ●
EGR programming cut off 1998-2008 ●

Master II 2001-2008 ●
Adaptives after injector replacement 2001-2008 ●
EGR programming cut off 2001-2008 ●

Renault Trucks
Midlum dxi 2006-2013 ● ● ● ● ● ● ● ● ●
Activation/Deactivation of heater in APM unit 2013 ●
AdBlue freeze monitor, calibration 2013 ●
Brake pad thickness, test 2013 ●
Change air production manager (APM) 2013 ●
Cylinder Balancing 2013 ●
Cylinder compression 2006-2013 ●
Cylinder deactivation 2013 ●
45 (60)

Desiccant holder, air dryer, resetting 2013 ●


Dosing, test 2013 ●
Level sensor calibration 2013 ●
SCR system drain, test 2013 ●
Start-up SCR, test 2013 ●
Status, air dryer 2013 ●
Urea crystallisation SCR Catalytic silencer, regeneration 2013 ●
Urea injection, test 2013 ●
Warm-up valve, test 2013 ●
Vehicle preset max speed 2013 ●
Wheel speed sensor test 2013 ●

Premium dxi 2006-2013 ● ● ● ● ● ● ● ● ● ●


Activation/Deactivation of heater in APM unit 2013 ●
AdBlue freeze monitor, calibration 2013 ●
Brake pad thickness, test 2013 ●
Change air production manager (APM) 2013 ●
Clutch cylinder, test 2013 ●
Clutch drag, test 2013 ●
Clutch wear check, test 2013 ●
Clutch, gearbox and pulling position calibration, with clutch
2013change ●
Clutch, gearbox and pulling position calibration, without2013
clutch change ●
Cylinder Balancing 2013 ●
Cylinder compression 2006-2013 ●
Cylinder deactivation 2013 ●
Desiccant holder, air dryer, resetting 2013 ●
Dosing, test 2013 ●
Gears, test 2013 ●
Gearshift cylinder 1/reverse gear, test 2013 ●
Gearshift cylinder 2/3, test 2013 ●
Inclination sensor, test 2013 ●
Injector programming cylinder 1 2013 ●
Injector programming cylinder 2 2013 ●
Injector programming cylinder 3 2013 ●
Injector programming cylinder 4 2013 ●
Injector programming cylinder 5 2013 ●
Injector programming cylinder 6 2013 ●
Level sensor calibration 2013 ●
PWM valves clutch, test 2013 ●
Range cylinder, test 2013 ●
SCR system drain, test 2013 ●
Split cylinder, test 2013 ●
Start-up SCR, test 2013 ●
Status, air dryer 2013 ●
Urea crystallisation SCR Catalytic silencer, regeneration 2013 ●
Urea injection, test 2013 ●
Warm-up valve, test 2013 ●
Vehicle preset max speed 2013 ●
Wheel speed sensor test 2013 ●
46 (60)

Magnum dxi 2013 ● ● ● ● ● ● ● ● ● ●


Activation/Deactivation of heater in APM unit 2013 ●
AdBlue freeze monitor, calibration 2013 ●
Brake pad thickness, test 2013 ●
Change air production manager (APM) 2013 ●
Clutch cylinder, test 2013 ●
Clutch drag, test 2013 ●
Clutch wear check, test 2013 ●
Clutch, gearbox and pulling position calibration, with clutch
2013change ●
Clutch, gearbox and pulling position calibration, without2013
clutch change ●
Cylinder Balancing 2013 ●
Cylinder compression 2013 ●
Cylinder deactivation 2013 ●
Desiccant holder, air dryer, resetting 2013 ●
Dosing, test 2013 ●
Gears, test 2013 ●
Gearshift cylinder 1/reverse gear, test 2013 ●
Gearshift cylinder 2/3, test 2013 ●
Inclination sensor, test 2013 ●
Injector programming cylinder 1 2013 ●
Injector programming cylinder 2 2013 ●
Injector programming cylinder 3 2013 ●
Injector programming cylinder 4 2013 ●
Injector programming cylinder 5 2013 ●
Injector programming cylinder 6 2013 ●
Level sensor calibration 2013 ●
PWM valves clutch, test 2013 ●
Range cylinder, test 2013 ●
SCR system drain, test 2013 ●
Split cylinder, test 2013 ●
Start-up SCR, test 2013 ●
Status, air dryer 2013 ●
Urea crystallisation SCR Catalytic silencer, regeneration 2013 ●
Urea injection, test 2013 ●
Warm-up valve, test 2013 ●
Vehicle preset max speed 2013 ●
Wheel speed sensor test 2013 ●

Kerax dxi 2013 ● ● ● ● ● ● ● ● ●


Activation/Deactivation of heater in APM unit 2013 ●
AdBlue freeze monitor, calibration 2013 ●
Brake pad thickness, test 2013 ●
Change air production manager (APM) 2013 ●
Clutch cylinder, test 2013 ●
Clutch drag, test 2013 ●
Clutch wear check, test 2013 ●
Clutch, gearbox and pulling position calibration, with clutch
2013change ●
Clutch, gearbox and pulling position calibration, without2013
clutch change ●
Cylinder Balancing 2013 ●
Cylinder compression 2013 ●
47 (60)

Cylinder deactivation 2013 ●


Desiccant holder, air dryer, resetting 2013 ●
Dosing, test 2013 ●
Gears, test 2013 ●
Gearshift cylinder 1/reverse gear, test 2013 ●
Gearshift cylinder 2/3, test 2013 ●
Inclination sensor, test 2013 ●
Injector programming cylinder 1 2013 ●
Injector programming cylinder 2 2013 ●
Injector programming cylinder 3 2013 ●
Injector programming cylinder 4 2013 ●
Injector programming cylinder 5 2013 ●
Injector programming cylinder 6 2013 ●
PWM valves clutch, test 2013 ●
Range cylinder, test 2013 ●
SCR system drain, test 2013 ●
Split cylinder, test 2013 ●
Start-up SCR, test 2013 ●
Status, air dryer 2013 ●
Urea crystallisation SCR Catalytic silencer, regeneration 2013 ●
Urea injection, test 2013 ●
Warm-up valve, test 2013 ●
Vehicle preset max speed 2013 ●
Wheel speed sensor test 2013 ●

Scania
G-Series 2005-2015 ● ● ● ● ● ● ● ● ● ●
Activating unit injector solenoid valves 2015 ●
Auto-adaptive parameters reset 2015 ●
Base settings for injectors 2015 ●
Basic setting and calibration of the EGR system 2015 ●
Basic setting of adaptation of the power take-off 2015 ●
Basic setting of adaptation values of the mass flow sensor
2015 ●
Calibrating of all levels 2015 ●
Calibrating the drive level 2015 ●
Checking fuel pressure in the accumulator 2015 ●
Clutch adaption 2015 ●
Condition test on the variable geometry turbocharger 2015 ●
Cylinder Balancing 2015 ●
Cylinder deactivation 2015 ●
Cylinder output test 2015 ●
Data reset for soot and ash 2015 ●
Default setting for injected reductant volume adaptation2015 ●
Diesel particulate filter regeneration 2015 ●
Fluid change and bleeding the clutch actuator 2015 ●
Injector programming 2015 ●
Pressure sensor calibration 2015 ●
Read data from ECU and save data to file 2005-2015 ●
48 (60)

Read service parameters 2015 ●


Reading calibration values for variable geometry turbocharger
2015 ●
Reducing the fuel pressure 2015 ●
Reset differential pressure sensor 2015 ●
Reset the service interval 2015 ●
Resetting air meter 2015 ●
Setting total clutch disk thickness 2015 ●
Test of Adblue metering amount 2015 ●
Vehicle preset max speed 2015 ●
Write data to ECU from file 2005-2015 ●

P-Series 2005-2015 ● ● ● ● ● ● ● ● ● ●
Activating unit injector solenoid valves 2015 ●
Auto-adaptive parameters reset 2015 ●
Base settings for injectors 2015 ●
Basic setting and calibration of the EGR system 2015 ●
Basic setting of adaptation of the power take-off 2015 ●
Basic setting of adaptation values of the mass flow sensor
2015 ●
Calibrating of all levels 2015 ●
Calibrating the drive level 2015 ●
Checking fuel pressure in the accumulator 2015 ●
Clutch adaption 2015 ●
Condition test on the variable geometry turbocharger 2015 ●
Cylinder Balancing 2015 ●
Cylinder deactivation 2015 ●
Cylinder output test 2015 ●
Data reset for soot and ash 2015 ●
Default setting for injected reductant volume adaptation2015 ●
Diesel particulate filter regeneration 2015 ●
Fluid change and bleeding the clutch actuator 2015 ●
Injector programming 2015 ●
Pressure sensor calibration 2015 ●
Read data from ECU and save data to file 2005-2015 ●
Read service parameters 2015 ●
Reading calibration values for variable geometry turbocharger
2015 ●
Reducing the fuel pressure 2015 ●
Reset differential pressure sensor 2015 ●
Reset the service interval 2015 ●
Resetting air meter 2015 ●
Setting total clutch disk thickness 2015 ●
Test of Adblue metering amount 2015 ●
Vehicle preset max speed 2015 ●
Write data to ECU from file 2005-2015 ●

R-Series 2005-2015 ● ● ● ● ● ● ● ● ● ●
Activating unit injector solenoid valves 2015 ●
Auto-adaptive parameters reset 2015 ●
Base settings for injectors 2015 ●
Basic setting and calibration of the EGR system 2015 ●
Basic setting of adaptation of the power take-off 2015 ●
49 (60)

Basic setting of adaptation values of the mass flow sensor


2015 ●
Calibrating of all levels 2015 ●
Calibrating the drive level 2015 ●
Checking fuel pressure in the accumulator 2015 ●
Clutch adaption 2015 ●
Condition test on the variable geometry turbocharger 2015 ●
Cylinder Balancing 2015 ●
Cylinder deactivation 2015 ●
Cylinder output test 2015 ●
Data reset for soot and ash 2015 ●
Default setting for injected reductant volume adaptation2015 ●
Diesel particulate filter regeneration 2015 ●
Fluid change and bleeding the clutch actuator 2015 ●
Injector programming 2015 ●
Pressure sensor calibration 2015 ●
Read data from ECU and save data to file 2005-2015 ●
Read service parameters 2015 ●
Reading calibration values for variable geometry turbocharger
2015 ●
Reducing the fuel pressure 2015 ●
Reset differential pressure sensor 2015 ●
Reset the service interval 2015 ●
Resetting air meter 2015 ●
Setting total clutch disk thickness 2015 ●
Test of Adblue metering amount 2015 ●
Vehicle preset max speed 2015 ●
Write data to ECU from file 2005-2015 ●

Scania Bus Chassis


K-Series 2006-2014 ●
Read data from ECU and save data to file 2006-2014 ●
Write data to ECU from file 2006-2014 ●

F-Series 2006-2013 ●
Read data from ECU and save data to file 2006-2013 ●
Write data to ECU from file 2006-2013 ●

N-Series 2006-2014 ●
Read data from ECU and save data to file 2006-2014 ●
Write data to ECU from file 2006-2014 ●

Omni-Series 2006-2014 ●
Read data from ECU and save data to file 2006-2014 ●
Write data to ECU from file 2006-2014 ●

Citywide 2012-2014 ●
Read data from ECU and save data to file 2012-2014 ●
Write data to ECU from file 2012-2014 ●
50 (60)

Škoda
Roomster 2010-2015 ● ● ● ● ● ● ● ● ●
Adaption fuel pressure regulation valve 2014-2015 ●
Adaption of remote control 2014-2015 ●
Basic setting of the mechatronic 2014-2015 ●
Bleeding, fuel system 2014-2015 ●
Boost pressure regulation 2014-2015 ●
Boost pressure regulator 2014-2015 ●
Central electronic system configuration 2014-2015 ●
Change value for oil quality 2014-2015 ●
Clear adaption memory 2014-2015 ●
Climate control 2014-2015 ●
Climate regulation 2014-2015 ●
Code control unit 2014-2015 ● ● ● ● ●
Code trailer function 2014-2015 ●
Coding central electronics control unit 2014-2015 ●
Cruise control function 2014-2015 ●
Deactivate factory mode 2014-2015 ●
Difference pressure sensor replaced 2014-2015 ●
EGR-valve, adaption 2014-2015 ●
Electronic throttle control 2014-2015 ●
Erasing fault memory - All systems 2014-2015 ●
Gateway configuration 2014-2015 ●
General-purpose configuration 2014-2015 ● ●
Idle speed adjustment 2011-2015 ●
Initialization of the steering angle sensor 2014-2015 ●
Injector programming 2014-2015 ●
Instrument cluster coding 2014-2015 ●
Intake manifold damper, adaption 2014-2015 ●
Language Change 2014-2015 ●
Mechatronic adaption value resetting 2014-2015 ●
Mechatronic remove position 2014-2015 ●
Oil level check 2014-2015 ●
Particle filter replaced 2014-2015 ●
Particle filter, check the carbon content 2014-2015 ●
Recall service message 2014-2015 ● ●
Regeneration (During test drive) 2014-2015 ●
Regeneration (Stationary vehicle) 2011-2015 ●
Reset adaption 2014-2015 ●
Reset oxygen sensor adaptions 2014-2015 ●
Reset throttle position adaptions 2014-2015 ●
Service interval data - carbon content 2014-2015 ●
Service interval data - days since last inspection 2014-2015 ●
Service interval data - distance travelled since last 2014-2015
inspection ●
Service interval data - lower limit for distance to next
2014-2015
inspection ●
Service interval data - lower limit for time to next inspection
2014-2015 ●
Service interval data - oil quality 2014-2015 ●
Service interval data - thermal load 2014-2015 ●
51 (60)

Service interval data - upper limit for distance to next


2014-2015
inspection ●
Service interval data - upper limit for distance to next
2014-2015
inspection (at permanent
● service interval)
Service interval data - upper limit for time to next 2014-2015
inspection ●
Service interval data - upper limit for time to next 2014-2015
inspection (at permanent
● service interval)
System status, gateway 2014-2015 ●
Test drive after basic setting 2014-2015 ●
Transport mode activation 2014-2015 ●
Transport mode inactivation 2014-2015 ●
Variant coding 2014-2015 ●
Zero compensation of brake pressure sensor 2014-2015 ●
Zero compensation of sensor module ESP 2014-2015 ●

Praktik 2010-2015 ● ● ● ● ● ● ● ● ●
Adaption fuel pressure regulation valve 2014-2015 ●
Adaption of remote control 2014-2015 ●
Basic setting of the mechatronic 2014-2015 ●
Bleeding, fuel system 2014-2015 ●
Boost pressure regulation 2014-2015 ●
Boost pressure regulator 2014-2015 ●
Central electronic system configuration 2014-2015 ●
Clear adaption memory 2014-2015 ●
Climate control 2014-2015 ●
Climate regulation 2014-2015 ●
Code control unit 2014-2015 ● ● ● ● ●
Code trailer function 2014-2015 ●
Coding central electronics control unit 2014-2015 ●
Cruise control function 2014-2015 ●
Deactivate factory mode 2014-2015 ●
Difference pressure sensor replaced 2014-2015 ●
EGR-valve, adaption 2014-2015 ●
Electronic throttle control 2014-2015 ●
Erasing fault memory - All systems 2014-2015 ●
Gateway configuration 2014-2015 ●
General-purpose configuration 2014-2015 ● ●
Idle speed adjustment 2011-2015 ●
Initialization of the steering angle sensor 2014-2015 ●
Injector programming 2014-2015 ●
Instrument cluster coding 2014-2015 ●
Intake manifold damper, adaption 2014-2015 ●
Language Change 2014-2015 ●
Mechatronic adaption value resetting 2014-2015 ●
Mechatronic remove position 2014-2015 ●
Oil level check 2014-2015 ●
Particle filter replaced 2014-2015 ●
Particle filter, check the carbon content 2014-2015 ●
Recall service message 2014-2015 ●
Regeneration (During test drive) 2014-2015 ●
Regeneration (Stationary vehicle) 2011-2015 ●
Reset adaption 2014-2015 ●
Reset mileage dependent inspection/extrawork 2015 ●
52 (60)

Reset oxygen sensor adaptions 2014-2015 ●


Reset the oil service 2015 ●
Reset throttle position adaptions 2014-2015 ●
Reset time dependent inspection/extrawork 2015 ●
Service interval data - carbon content 2014-2015 ●
Service interval data - days since last inspection 2014-2015 ●
Service interval data - distance travelled since last 2014-2015
inspection ●
Service interval data - lower limit for distance to next
2014-2015
inspection ●
Service interval data - lower limit for time to next inspection
2014-2015 ●
Service interval data - oil quality 2014-2015 ●
Service interval data - thermal load 2014-2015 ●
Service interval data - upper limit for distance to next
2014-2015
inspection ●
Service interval data - upper limit for distance to next
2014-2015
inspection (at permanent
● service interval)
Service interval data - upper limit for time to next 2014-2015
inspection ●
Service interval data - upper limit for time to next 2014-2015
inspection (at permanent
● service interval)
System status, gateway 2014-2015 ●
Test drive after basic setting 2014-2015 ●
Transport mode activation 2014-2015 ●
Transport mode inactivation 2014-2015 ●
Variant coding 2014-2015 ●
Zero compensation of brake pressure sensor 2014-2015 ●
Zero compensation of sensor module ESP 2014-2015 ●

Trailers
Knorr All years ●

VDL Berkhof
Axial 2006-2010 ●
Read data from ECU and save data to file 2006-2010 ●
Write data to ECU from file 2006-2010 ●

VDL Bus & Coach


Futura 2014-2015 ● ● ● ● ● ●
Accelerator pedal calibration 2014-2015 ●
Adblue tank heater relay 2014-2015 ●
Cleaned diesel particulate filter installation 2014-2015 ●
Engine brake 2014-2015 ●
Indicator lamps on instrument panel 2014-2015 ●
Injector programming 2014-2015 ●
New diesel particulate filter installation 2014-2015 ●
Relay, preheater 2014-2015 ●
Vehicle preset max speed 2014-2015 ●
Wheel speed sensors 2014-2015 ●
53 (60)

Jonckheere 2014-2015 ● ● ● ● ● ●
Accelerator pedal calibration 2014-2015 ●
Adblue tank heater relay 2014-2015 ●
Cleaned diesel particulate filter installation 2014-2015 ●
Engine brake 2014-2015 ●
Indicator lamps on instrument panel 2014-2015 ●
Injector programming 2014-2015 ●
New diesel particulate filter installation 2014-2015 ●
Relay, preheater 2014-2015 ●
Vehicle preset max speed 2014-2015 ●
Wheel speed sensors 2014-2015 ●

Synergy 2014-2015 ● ● ● ● ● ●
Accelerator pedal calibration 2014-2015 ●
Adblue tank heater relay 2014-2015 ●
Cleaned diesel particulate filter installation 2014-2015 ●
Engine brake 2014-2015 ●
Indicator lamps on instrument panel 2014-2015 ●
Injector programming 2014-2015 ●
New diesel particulate filter installation 2014-2015 ●
Relay, preheater 2014-2015 ●
Vehicle preset max speed 2014-2015 ●
Wheel speed sensors 2014-2015 ●

Citea 2014-2015 ● ● ● ● ● ●
Indicator lamps on instrument panel 2014-2015 ●
Trip Information 2014-2015 ●
Trip information reset 2014-2015 ●
Wheel speed sensors 2014-2015 ●

MidEuro 2011-2013 ●

MidCity 2011-2013 ●

VDL Jonckheere
Transit 2006-2010 ●
Read data from ECU and save data to file 2006-2010 ●
Write data to ECU from file 2006-2010 ●

Volare
4x4 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

V6L 2012-2015 ● ●
Trip Information 2012-2015 ●
54 (60)

Trip information reset 2012-2015 ●

V8L 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

W6 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

W7 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

W8 2012-2015 ● ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

W9 2012-2015 ● ●

DW9 2012-2015 ● ● ● ●
Actuation of clutch operator. Only on models with2012-2015
control unit GS. ●
Check metering quantity of AdBlue metering unit 2012-2015 ●
Cleaning of AdBlue metering unit 2012-2015 ●
Clutch calibration with lining change 2012-2015 ●
Clutch calibration without lining change 2012-2015 ●
Clutch wear check, test 2012-2015 ●
Compression test 2012-2015 ●
Cylinder Balancing 2012-2015 ●
Initial startup of SCR exhaust aftertreatment system
2012-2015 ●
Injection time 2012-2015 ●
Learning, Foot throttle actuator 2012-2015 ●
Legal speed limit 2012-2015 ●
Measurment of all sensors 2012-2015 ●
Parameter reading, Tire rolling circumference 2012-2015 ●
Parameter settings: Tire rolling circumference of the
2012-2015
front axle ●
Parameter settings: Tire rolling circumference of the
2012-2015
rear axle ●
Read vehicle control unit list 2012-2015 ●
Reading out additional information for SCR fault codes
2012-2015 ●
Re-learn splitter ratio. Only on models without control
2012-2015
unit GS. ●
Re-learn terminal W ratio 2012-2015 ●
Reset of cylinder balancing 2012-2015 ●
Selected Maximum Vehicle Speed Limit 2012-2015 ●
Test of AdBlue delivery circuit 2012-2015 ●
Test of AdBlue pump 2012-2015 ●
Test of AdBlue tank heater solenoid valve 2012-2015 ●
Test of SCR compressed air switching valve 2012-2015 ●
Unit pump programming cylinder 1 2012-2015 ●
Unit pump programming cylinder 2 2012-2015 ●
Unit pump programming cylinder 3 2012-2015 ●
55 (60)

Unit pump programming cylinder 4 2012-2015 ●


Unit pump programming cylinder 5 2012-2015 ●
Unit pump programming cylinder 6 2012-2015 ●
Unit pump programming cylinder 7 2012-2015 ●
Unit pump programming cylinder 8 2012-2015 ●

W-L 2012-2015 ● ●

Volksbus
5.xxx 2013-2015 ● ●
Trip Information 2013-2015 ●
Trip information reset 2013-2015 ●

8.xxx 2008-2015 ● ●
Cylinder deactivation 2008-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

9.xxx 2004-2015 ● ●
Cylinder deactivation 2004-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

15.xxx 2006-2015 ● ● ●
Compression test 2012-2015 ●
High-pressure test 2012-2015 ●
Reset oxygen sensor adaptions 2012-2015 ●
Reset torque limiting 2012-2015 ●
Reset values after exchanging particulate trap 2012-2015 ●
Shut-off cylinder 1 2012-2015 ●
Shut-off cylinder 2 2012-2015 ●
Shut-off cylinder 3 2012-2015 ●
Shut-off cylinder 4 2012-2015 ●
Shut-off cylinder 5 2012-2015 ●
Shut-off cylinder 6 2012-2015 ●
Signal analysis, Exhaust gases 2012-2015 ●
Signal analysis, injection volume and engine speed2012-2015 ●

17.xxx 2006-2015 ● ● ● ●
Compression test 2012-2015 ●
High-pressure test 2012-2015 ●
Reset oxygen sensor adaptions 2012-2015 ●
Reset torque limiting 2012-2015 ●
Reset values after exchanging particulate trap 2012-2015 ●
Shut-off cylinder 1 2012-2015 ●
Shut-off cylinder 2 2012-2015 ●
Shut-off cylinder 3 2012-2015 ●
Shut-off cylinder 4 2012-2015 ●
56 (60)

Shut-off cylinder 5 2012-2015 ●


Shut-off cylinder 6 2012-2015 ●
Signal analysis, Exhaust gases 2012-2015 ●
Signal analysis, injection volume and engine speed2012-2015 ●

18.xxx 2006-2015 ● ● ● ●
Compression test 2012-2015 ●
Cylinder deactivation 2006-2012 ●
High-pressure test 2012-2015 ●
Reset oxygen sensor adaptions 2012-2015 ●
Reset torque limiting 2012-2015 ●
Reset values after exchanging particulate trap 2012-2015 ●
Shut-off cylinder 1 2012-2015 ●
Shut-off cylinder 2 2012-2015 ●
Shut-off cylinder 3 2012-2015 ●
Shut-off cylinder 4 2012-2015 ●
Shut-off cylinder 5 2012-2015 ●
Shut-off cylinder 6 2012-2015 ●
Signal analysis, Exhaust gases 2012-2015 ●
Signal analysis, injection volume and engine speed2012-2015 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

26.xxx 2013-2015 ● ● ●
Trip Information 2013-2015 ●
Trip information reset 2013-2015 ●

Volkswagen Truck
Constellation 2005-2015 ● ● ●
Compression test 2012-2015 ●
Cylinder deactivation 2005-2013 ●
ECU Exchange 2005-2015 ●
High-pressure test 2012-2015 ●
Reset oxygen sensor adaptions 2012-2015 ●
Reset torque limiting 2012-2015 ●
Reset values after exchanging particulate trap 2012-2015 ●
Shut-off cylinder 1 2012-2015 ●
Shut-off cylinder 2 2012-2015 ●
Shut-off cylinder 3 2012-2015 ●
Shut-off cylinder 4 2012-2015 ●
Shut-off cylinder 5 2012-2015 ●
Shut-off cylinder 6 2012-2015 ●
Signal analysis, Exhaust gases 2012-2015 ●
Signal analysis, injection volume and engine speed2012-2015 ●
System test while operating 2005-2015 ●
Trip Information 2005-2015 ●
Trip information reset 2005-2015 ●
57 (60)

Delivery 2003-2015 ●
Cylinder deactivation 2003-2012 ●
Trip Information 2012-2015 ●
Trip information reset 2012-2015 ●

Worker 2003-2015 ● ●
Compression test 2012-2015 ●
Cylinder deactivation 2003-2011 ●
High-pressure test 2012-2015 ●
Reset oxygen sensor adaptions 2012-2015 ●
Reset torque limiting 2012-2015 ●
Reset values after exchanging particulate trap 2012-2015 ●
Shut-off cylinder 1 2012-2015 ●
Shut-off cylinder 2 2012-2015 ●
Shut-off cylinder 3 2012-2015 ●
Shut-off cylinder 4 2012-2015 ●
Shut-off cylinder 5 2012-2015 ●
Shut-off cylinder 6 2012-2015 ●
Signal analysis, Exhaust gases 2012-2015 ●
Signal analysis, injection volume and engine speed2012-2015 ●

Volvo Bus Chassis


B7R 2001-2005 ●
Cylinder Balancing 2001-2005 ●
Cylinder compression 2001-2005 ●
Cylinder deactivation 2001-2005 ●
Vehicle preset max speed 2001-2005 ●

B9S 2002-2012 ●

B7L 2001-2005 ●
Cylinder Balancing 2001-2005 ●
Cylinder compression 2001-2005 ●
Cylinder deactivation 2001-2005 ●
Vehicle preset max speed 2001-2005 ●

B9R 2003-2012 ●

B9L 2005-2012 ●
Vehicle preset max speed 2005-2008 ●

B9TL 2005-2012 ●

B12M 2005-2012 ●

B12B 2005-2012 ●
58 (60)

B12R 2005-2012 ●

B11R 2011-2013 ●
Cylinder compression 2011-2013 ●

B5L 2013-2015 ● ●
Brake pad thickness, test 2013-2015 ●
Level sensor calibration 2013-2015 ●
Level sensor test 2013-2015 ●
Modulator, 2:nd axle left 2013-2015 ●
Modulator, 2:nd axle right 2013-2015 ●
Modulator, 3:rd axle 2013-2015 ●
Modulator, front 2013-2015 ●
Pressure sensor test 2013-2015 ●
Wheel speed sensor test 2013-2015 ●

B8R 2014-2015 ● ● ●
Brake pad thickness, test 2014-2015 ●
Clutch cylinder, test 2014-2015 ●
Clutch drag, test 2014-2015 ●
Clutch wear check, test 2014-2015 ●
Clutch, gearbox and pulling position calibration, with
2014-2015
clutch change ●
Clutch, gearbox and pulling position calibration, without
2014-2015
clutch change ●
Control lever test 2014-2015 ●
Gears, test 2014-2015 ●
Gearshift cylinder 1/reverse gear, test 2014-2015 ●
Gearshift cylinder 2/3, test 2014-2015 ●
Inclination sensor, test 2014-2015 ●
Level sensor calibration 2014-2015 ●
Level sensor test 2014-2015 ●
Modulator, 2:nd axle left 2014-2015 ●
Modulator, 2:nd axle right 2014-2015 ●
Modulator, 3:rd axle 2014-2015 ●
Modulator, front 2014-2015 ●
Pressure sensor test 2014-2015 ●
Pressure setting retarder, test 2014-2015 ●
PWM valves clutch, test 2014-2015 ●
PWM-valves retarder, test 2014-2015 ●
Range cylinder, test 2014-2015 ●
Solenoid valve, brake, intermediate shaft test 2014-2015 ●
Split cylinder, test 2014-2015 ●
Wheel speed sensor test 2014-2015 ●

Volvo Truck South America


VM 2006-2012 ●
59 (60)

Volvo Trucks
FL 2006-2013 ●
Cylinder Balancing 2007 ●
Cylinder compression 2007 ●
Cylinder deactivation 2007 ●
Vehicle preset max speed 2007 ●

FE 2006-2013 ●

FH16 2004-2006 ●

FL (3) 2014-2015 ● ●
Air suspension control box in-output signals status,2014-2015
test ●
Air suspension switches in-output signals status, test
2014-2015 ●
Bogie switches test 2014-2015 ●
Brake pad thickness, test 2014-2015 ●
Control box test 2014-2015 ●
Level sensor calibration 2014-2015 ●
Level sensor test 2014-2015 ●
Modulator, front 2014-2015 ●
Modulator, left rear 2014-2015 ●
Modulator, right rear 2014-2015 ●
Modulator, trailing axle 2014-2015 ●
Modulator, trailing unit 2014-2015 ●
Pressure sensor test 2014-2015 ●
Solenoid valve test 2014-2015 ●
Wheel speed sensor test 2014-2015 ●

FE (3) 2014-2015 ● ●
Air suspension control box in-output signals status,2014-2015
test ●
Air suspension switches in-output signals status, test
2014-2015 ●
Bogie switches test 2014-2015 ●
Brake pad thickness, test 2014-2015 ●
Control box test 2014-2015 ●
Level sensor calibration 2014-2015 ●
Level sensor test 2014-2015 ●
Modulator, front 2014-2015 ●
Modulator, left rear 2014-2015 ●
Modulator, right rear 2014-2015 ●
Modulator, trailing axle 2014-2015 ●
Modulator, trailing unit 2014-2015 ●
Pressure sensor test 2014-2015 ●
Solenoid valve test 2014-2015 ●
Wheel speed sensor test 2014-2015 ●

FH (4) 2013-2015 ● ●
Clutch, gearbox and pulling position calibration, with
2013-2015
clutch change ●
Clutch, gearbox and pulling position calibration, without
2013-2015
clutch change ●
Self-adaptions parameters reset 2013-2015 ●
60 (60)

FMX (4) 2013-2015 ● ●


Clutch, gearbox and pulling position calibration, with
2013-2015
clutch change ●
Clutch, gearbox and pulling position calibration, without
2013-2015
clutch change ●
Self-adaptions parameters reset 2013-2015 ●

FM (4) 2013-2015 ● ●
Clutch, gearbox and pulling position calibration, with
2013-2015
clutch change ●
Clutch, gearbox and pulling position calibration, without
2013-2015
clutch change ●
Self-adaptions parameters reset 2013-2015 ●

FL6 2000-2006 ●
Cylinder Balancing 2000-2006 ●
Cylinder deactivation 2000-2006 ●

FM10 1998-2001 ●
Cylinder Balancing 1998-2001 ●
Cylinder deactivation 1998-2001 ●

FM7 1998-2001 ●
Cylinder Balancing 1998-2001 ●
Cylinder deactivation 1998-2001 ●

You might also like