Professional Documents
Culture Documents
OpenToonz
Startup document
By Dr. Sato
1
Table of contents
Start
■ OpenToonz Main file p.3
□ About p.3
Tracing (Cleanup)
□ Creating a tlv file p.4
□ Without the anti-aliasing, Without any changes of size, tlv If you want to create a file p.8
□ Read the Level p.9 □ Copy / paste the range that you selected in
the image, move p.14
□ To save the Level p.9
□To edit a vector image p.15
□ To Create a new file Level p.9
□ To save the palette file p.9 □ Tools involved in the display of the image
□ OpenToonz Close (Terminate) p.10 □ Creating sheet files for performing color
□ Synthesis and group cutting of cells designation p.25
p.11 □ To display only the necessary frame p.25
□ To extract the color from the picture □To preview in such a transparent display
p.13 Double exposure shadow p.26
□ Automatically Connecting the broken lines □ Revocation of operation (undo)
p.13 p.15
□ The modification of the line p.13 □ Send the display of the serial number frame
□ Filling in the area (Fill Tool) p.16
p.13 □ Duplication and deletion of the frame
□ Drawing with a brush p.13 p.16
□ To edit the style of the palette p.17 □ tlv To display the frame p.22
■ OpenToonz, interface
OpenToonz's interface, one of the Rooms (workspace)
Is software that using a panel of each functional layout and display。
□ About Room
[
[Xsheet] :To synthesize a picture formed sheet
[Batches]: automatic multi-frame processing
[Browser]: for displaying and editing of files
■ Cleanup (trace)
In the Cleanup process, use the tif format of the file that you
created in the scan at GTS *, to create a paint file (Toonz raster
level file: tlv).
Please refer to the "GTS manual" for ※ scan in GTS.
Work switching to Cleanup room.
Image size of tlv, position of the image to be cut out, the density
of the line, setting the output destination, perform and write.
□ creation of tlv file
1. Load the tiff file scanned by GTS to Xsheet.
In Xsheet, select the column you want to place the tiff, and select the Load Level in the right-click menu of the Files
menu or column.
※ If you already use to read configuration file you have created (col), select the tiff file, from [Load] under Cleanup
Settings window, and then Load the configuration file. Load result will be reflected in the value of the Cleanup
Settings.
Layout kind → will continue to work in the order of the main become cell → other cells.
If it would overlap other picture on top of the tiff you want to preview to display only the picture required by the
[Camera Stand Visibility Toggle].
※ manually to step 3 If you go after the setting size. If you do the work by reading the settings to Step
5.3,the angle of the tiff image that is tilted will heal in the correct angle.
[Rotate]: Select the angle, when the Camera Test and Preview Cleanup, the value selected in the Rotate will
be reflected in the clockwise direction.
[Flip]: Reverses the picture to the left and right, up and down.
To set the size to Cleanup in Camera Test.
Choose a [Processing / Camera Test]. Red frame represents the range to be cut out with the tiff image on top
of the Viewer will be displayed.
□ scaling in drag, and move the range of Click and drag in the red frame range.
Be allowed to stretch the canvas size to Cleanup will retain the current DPI. Resolution (pixel size) will
change to fit the canvas sizes.
[Forced Squared Pixel]: When turned ON, the aspect ratio of 1 pixel 1: 1.
If the angle of 5.3.tif image is tilted will heal in the correct angle.
[Rotate]: Select the angle, when the Camera Test and Preview Cleanup, the value selected in the Rotate will
be reflected in the clockwise direction.
[Flip]: Reverses the picture to the left and right, up and down.
To set the size to Cleanup in 4.Camera Test.
Select the [Processing / Camera Test]. Red frame that represents the range to be cut out with the tif image
on top of the Viewer will be displayed.
□ scaling in drag, and move the range of Click and drag in the red frame range.
Be allowed to stretch the canvas size to Cleanup will retain the current DPI. Resolution (pixel size) will
change to fit the canvas size.
[Forced Squared Pixel]: When turned ON, the aspect ratio of 1 pixel 1: 1.
5. Preview.
If the line processing is not required, and the Line processing option to
none. The Greyscale If you want to recognize the line as black, if you want
to recognize the color,choose Color.
Setting of anti-aliasing
[Standard]: adds anti-aliasing in the resampling process by changing the scale.
The DPI of the output result, it is recommended to perform the process is shortened to less than 90% of the
original image.
[None]: it does not perform anti-aliasing.
[Morphological]: and smoothing by analyzing the image of the edge. There is no need to reduce the image size.
[Brightness]: the thickness of the line will change. The lower the value, the line will be thick.
[Contrast]: Adjust the application degree of anti-aliasing. The higher the pixel is clearly made in large
numbers, the smaller the value, it will be took pixel of Henri alias.
The amount of anti-aliasing can be checked by enabling the [Processing / Opacity Check].
※ usually set to the same value as the Brightness. When set to less than Brightness of the value of all of the
line will be a semi-transparent pixels.
※ If you set the None or Morphological anti-aliasing, Contrast parameter does not work. [Sharpness]: to define
the sharp degree of line. The higher the value will generate a hard line in Sharp. With a low value, it will be
more smooth lines.
[Despeckling]: Remove the small spots from the image. Value is what you view the size of the maximum area to be
removed, in pixels.
You can see the spots to be removed to enable the Opacity Check.
[MLAA Intensity]: Sets the blur strength in Morphological anti-aliasing. Numeric value will be about blurry line
is large.
(Morphological selection only when available)
In the case of color line drawing, to adjust the parameters, so that you can detect what color in the image is
how divided.
Automatically sets the color assigned to the line after the · Cleanup processing.
And color to be used for recognition, color assigned to the post-recognition or select Edit either from the box
at the bottom of the Style Editor, you can each change the color. ① in a color is used in the recognition, is
the color of the box that ② is assigned. It is also possible to pick up the color value from the image of the
work area in the RGB Picker tool.
①
②
① ②
9. • The black you can set different parameters. Black is usually defined as a solid line of line drawing. Other
colors are usually defined as a color Torres lines, such as shadows and highlights.
10. - Add or remove color list [+] of the part under color list - done by clicking the button [].
11. Parameters that can be set in the color list in addition to the above parameters will be the following.
12. [Color Threshold]: Sets black recognized as pixel should be, and for the pixel to be recognized as a
color. The higher the value, the more the amount of pixels that are considered to be color.
13. [White Threshold]: Set for the pixel to be considered as white. For example, you use, for example, to
ignore the color of the paper. The higher the value, the more the amount of pixels that are considered to be white.
14. [H Range]: Sets the hue range for color recognition. The higher the value, the color of the pixel will be
many.
15. [Line Width]: Sets the width of the colored line to be displayed. Line will be thicker higher the value.
16. The value of the processing of number7. Line is under Cleanup Settings window. Once you have decided on
the [Save In] item to specify the output location of tlv.
18. Click the [Save] button at the bottom of the Cleanup Settings window When you have finished all the
settings, Cleanup of the configuration file to specify the location
19. Save Le (extension cln).
20. ※ cln file, please save it in the same folder hierarchy The tiff file that serves as the original.
21. ※ When the already select the tiff you have created a cln, and Load the cln value automatically.
22. The same name in the Level, by saving in the same location, it can also be used in the animation level. In
this case, the settings are automatically displayed when you select tlv, is when the tlv is cleanup is always used.
23. The Setting of the loaded cln in the project and the scene, will be the default setting.
26. In the case of color line drawing, to adjust the parameters, so that you can detect what color in the
image is how divided.
27. Automatically sets the color assigned to the line after the · Cleanup processing.
28. And color to be used for recognition, color assigned to the post-recognition or select edit either from the box at the
bottom of the Style Editor, you can each change the color. ① in a color is used in the recognition, is the color of
the box that ② is assigned. It is also possible to pick up the color value from the image of the work area in the RGB
Picker tool. If you want to clean up the following cell, repeat steps 2-8.
29. After you save the cln of all of the cells, and then save the entire Xsheet data.
Once you have saved all of the cln in [Files / Save Scene As] to save the Xsheet.
Do a Cleanup.
Select the [Windows / Other Windows / Tasks], to display the Tasks window.
In the dialog that appears when you click the Tasks menu [Add Cleanup] button, select the tnz file that
you want to cleanup, and then click OK.
Since tnz you selected Tasks menu is registered, select the tasks that have been registered.
[Suspended]: Pause
To [Files / New Scene], will be updated and read the tnz file again with [Load Scene], to tiff display
on Xsheet (light blue) is tlv display (green).
[Skip]: only one frame to skip the Cleanup. (To move to the
next frame is not executed.)
When you have finished the calculation of 12.Cleanup, make sure tlv has been created properly.
Select the [Files / Load Scene] at Ink & paint Room, and Load the tnz was Cleanup.
Select the tlv on Xsheet window and select the right-click menu / Info]. Image Size, you can check the
information of Dpi.
Select the cell you want to check the movement in the Level Strip to check the movement of the frame in the
[Edit / Next Frame (Previous Frame)].
□ Without the anti-aliasing, by the file conversion function If you want to create a tlv file without any
changes of size, you can also create a tlv from general-purpose image serial number file such as tiff and
tga.
Right-click on the file you want to convert in the
file browser, and select the Convert....
⑤
⑥
⑦
①
②
③ ④
① enter the frame range that you want to create.
② Select the tlv of the destination you want to create.
③ Enter the file name.
④ Select the file format. If you want to create a tlv will select the tlv.
⑤ When checked, if the already tlv files to the destination exists, and create a new tlv it does not
overwrite the file.
⑥ When checked, you can delete the attached to the front of the frame number of the file name of tlv before
conversion [. (Dot)]. This function is used if you want to convert from a file of tlv to tga and other file
formats.
※ only if the file format after the conversion have not selected a tlv, function is enabled. Refer to
"convert the tlv file to a file format other than tlv" (p.23) for more information.
⑦ If you want to convert from serial number image file of a line drawing of no anti-aliasing to tlv is the
[Unpainted tlv from non AA source]
Choose. Without anti-aliasing, if you want to convert from already painted an image sequence files to tlv
will select the [Painted tlv from non AA source]. If you want to convert the already painted an image
sequence files to tlv is, a one-pixel line to the boundary of the coating will be converted are
automatically added (appearance does not change).
When painting, when you work one of tlv more than one person, enter only
the frame, each of which work in here.
(If ※ open the same frame, when you save the Level, all of the frames
that are open will be overwritten.)
The Xsheet appears only the number of frames specified from, the To, but, tlv is read all the
frames.
The following alert window and have not saved the tpl (palette file) when you run the save will
be displayed. Overwrite Palette …tlv Were stored, further tpl will be overwritten.
Do not Overwrite Palette ... tlv saves, tpl does not save.
Save Level As ... to save the tlv files are currently working with a different name.
Tpl that comes to tlv also save at the same time. (When you save a A.tlv, A.tpl also saved)
Open Recent Level File ... tlv that worked in the past is displayed as a history, and Load if you select the tlv.
Level Settings ... appears tlv of information of the currently selected in a separate window.
Save Palette ... Saves the palette file of tlv of the currently selected (tpl).
Open Recent Scene File ... tnz that worked in the past is displayed as a history, and Load If you select the tnz.
New Create Scene ... Scene a (tnz) to the new. It is also used when you close a file that is currently open.
If you do not save the Scene data, you will be prompted to select whether close without saving or save overwrite the
changes.
Scene if you do in order to close a file that is currently open without saving, and then select the [Discard].
If there is unsaved changes to tlv is, a confirmation dialog box will appear.
If you do not have to save the data, you will be prompted to select whether close without saving or save overwrite the
changes.
□ synthesis and process of splitting of cell
In OpenToonz, by treating as a Xsheet panel synthetic slip, you can carry out the synthesis of intuitively cell.
Run the [Files / Apply Match Lines] to synthesize a line of two of tlv.
【Step 1】
On the right side of tlv currently working (tlv to which you want to apply the child .Match Line of synthesis) to
Xsheet, and place the Match Line to tlv (tlv of parent .Match Line of synthesis). Together in each cell number by
arranging to Xsheet in synthetic form as the cell it is possible to paste the line. (※ The image below,
The G8 ~ 13 is the seat arrangement in the case where you want to paste a line of F1)
① ㋐ ㋑
[Step 3]
The following window is displayed. Match Lines Which Ink in Paste or, setting whether to bite
① Ink Usage
[Add Match Line Inks]: Match paste the color of the use that line in tlv to Line. The palette of
the current working page that [match lines] is created, the color that has been used will be
copied.
[Use Ink]: the style number of the current working specify one, and then paste the tlv in that
color.
※ If you do not want to use all of the line to paste, so that they can be deleted later
unnecessary line, and paste to create a temporary style rather than the style you want to
actually use.
Finger Tool… Use to line drawing. And trace the top of the line drawing, is a function that
can fill the hole that is surrounded on three sides.
Basic will use the colors you have selected, but when you click on the line, to extract the color
of the function as well as portions thereof of the Style Picker Tool.
[Invert]: When checked, to erase the part that stands out when you traced the top of the line.
Fill Tool… Is the ability to paint to the surface of the area and the line drawing.
[Type - Normal]: Areas to paint until the region of the surface, which is closed in the line
drawing in. Lines you can change the color to the point where the line drawing is interrupted.
[Type - Rectangular, Freehand, Polyline]: enclosed range only, and paint to a region of the
plane, which is closed in the line drawing in Areas. Lines you can change the color of the line
drawing.
[Mode - Areas]: to paint until the region of the surface, which is closed in the line drawing.
You can assign a keyboard shortcut.
[Mode - Lines]: to paint the line drawing. You can assign a keyboard shortcut.
[Mode - Lines & Areas]: to paint until the region of the surface, which is closed in the line
drawing, you can paint in a line drawing.
[Selective]: In the case of Areas only it is valid. You will not be able to paint again to the
plane that is already painted.
[Onion Skin]: Check this feature, when you run the right-click menu "Active Onion Skin" in the
Viewer, are dimmed to the lower frame to frame of tlv that was selected last is currently
selected, Fill - Areas run at once extraction → Fill the color of when you run the Onion Skin.
[Frame Range]: Run the Fill into a plurality of frames. This is useful when a plurality paint a
simple area.
Geometric Tool… Is a function that can draw such as lines and polygons.
[Size]: Set the width of the line.
[Shape]: Select the type of, such as a circle or a polygon.
[Polygon Sides]: Set the number of [Shape / Polygon] at the time of use side.
[Selective]: When checked, it will not be able to be overridden for line art that already exists.
[Pencil Mode]: When checked, it will be drawn line drawing the lines of the anti-aliasing with no
binary.
Eraser Tool… This function is to erase to the plane of the region and a line drawing.
[Size]: to set the brush size.
[Type - Normal]: is the brush mode.
[Type - Rectangular, Freehand, Polyline]: Clears the range enclosed.
[Mode - Areas]: to apply to the surface of the area.
[Mode - Lines]: Apply to line drawing.
[Mode - Lines & Areas]: You apply for both the surface of the area and the line drawing.
[Selective]: When checked, it will not be able to apply for the line art that already exists.
[Invert]: Run the Erase in a region other than the selected range.
[Frame Range]: Run the Erase into a plurality of frames.
[Pencil Mode]: Mode - is valid only when the Lines. When checked, we do not attach the anti-
aliasing when you turn off the line drawing。
More Tools/
Edit Tool…Camera selection, move, is the ability to perform editing such as changing the
ratio.
When you use the tool, you need to select the frame and the column at Xsheet.
□ Copy / paste, move the selected range of the image(More Tools/)
Selection Tool…Viewer On the window, it is the ability to select a specific area of the image.
Select the option of Type, enclose the range you want to select in the Viewer. There can be
multiple choice.
Movement and of the image in the selected range by the arrow keys, Copy from the Edit menu, Cut,
by combining the Insert Paste, duplicate, delete, you can paste.
It is also possible between the different frames.
※ It is valid only file of tlv.
□To edit a vector image(More Tools/)
Control Point Editor Tool…Edit the control point is the ability to change the shape of the
vector.
Pinch Tool…By clicking and dragging anywhere in the vector, it is the ability to change
the shape of the vector.
Pump Tool…This function is used to change the thickness of the vector line. Use Click and drag
the range you want to change。
Magnet Tool… This function is to change the multiple vectors. Use Click and drag the range you
want to change.
Iron Tool…This function is used to correct the wrinkles of the vector line. You can use to
move the cursor you want to modify the vector line.
Cutter Tool…This function is cut at a place where you click on the vector line.
Skeleton Tool…To define the character model is the ability to move as cutout animation.
Hook Tool…In stage gap tick, move the thing, is the ability to define a reference point at the
time of connecting the two things.
Plastic Tool…Character, or it is the ability to create a mesh for moving to deform a part of。
Rotate Tool…Viewer the display of the image will rotate in for work.
Hand Tool…Viewer Is the ability to move on. Click and drag to use。
To return to the previous state to cancel the operation was carried out in Redo ... Undo.
Copy ... will remember the original material that you want to replicate.
The material that you have stored in memory using the Insert Past ... Copy / Cut, copy and paste to the range that is
currently selected, or to paste inserted into the selected and that frame.
The Paste Into ... Copy the frame, is the ability to frame paste was selected. Level Strip is only valid.
Insert ... frame is selected, or to Xsheet, and insert the empty frame.
Invert Selection ...
Select All ... Selection Tool and, in the Level Strip, and select all the images or frames.
and Selection Tool, Reverses the range that you selected in the Level Strip.
Menu is used for display Windows ... each function in a floating window.
Style Editor ... is the window that you want to edit the color of the style.
③ [Wheel]: Left in the hue (H), can be changed by clicking and dragging the saturation (S) and
brightness (V) on the right.
⑦ [Color Window]: the left is the color of the currently being edited, and the right to display
the color at the time of the style selection.
⑧ [Auto Apply]: When enabled by clicking, the color of
①
② the style in real time will be synchronized when you
edit the color.
③
⑥ [Zero Matte]: to all the value of the Matte of the selected style 0.
⑦ [Fade To Color]: Set the RGBM values and press the Fade To button in Color,% of value worth, closer to the color has
set value.
Palette ... palette tool that comes with the tlv. The contents of the tpl file.①
②
③
④ ⑥ ⑤
① palette name
② page: You can save to add, delete and pallets the page in the right-click menu. It switched by the tab.
③ style: you will see a white frame in the style of the selected. Select a style, you can move to ctrl key + drag.
⑤ in same order on the value of the Matte, will bottom in the checkered display. Checker will appear darker as the value
is smaller.
⑥ style number: If you change the arrangement of the style number does not change.
① ② ③ ④ ⑤ ⑥ ⑧
⑦
① [Palette]: by dragging and dropping to the Studio Palette, and add it as a new page of the Current Palette to Studio
Palette.
④ [Set Key]: by setting the key color chip, you can create more than one color in one of tpl.
⑧ [Lock Palette] :You can toggle whether the editing of the palette content possible / impossible.
This window is used to display a palette that becomes a Studio Palette ... color swatch.
[Console menu]
Show / hide ① options
② You an image that is displayed and stored in the format set by the Output Settings. Only Preview mode is enabled.
③ will remember the one frame of the displayed picture to memory. This feature is used in ④.
④ And the frame that is stored in the "③", compares displaying the frame you preview again.
⑤ Display the background color in the RGB all 255
⑥ Display the background color in the RGB all 0
⑦ Display the background color in the Matte 0
⑧ move to the top of the frame
⑨ One Back frame
⑩ Pause frame
⑪Play frame
⑫ Loop play frame
⑬ Advance one frame
⑭ move to the last frame
⑮ R, G, B, there is a Matte button, display only each of the color information when you click
Display a histogram of the image ⑯
Set the ⑰ key frame. Go to the key frame in the left and right buttons.
⑱ Specifies the playing time of the frame rate.
□ To edit the time sheet (Windows /)
Xsheet ... to place the image files, such as tlv or tiff, it is a window for each work.
Stacking order of the left and right cell, the top and bottom displays the time axis。
①Show / Hide during preview
①
② Camera Stand Show / Hide
②
Thumbnail view the first frame of the ③ column
③
④ Peguba
④
Displays the display
⑤ Column · Cells the
type of
⑤ [Right-click menu]
※ the following items
will be applied to
Cells you have
selected.
① You can select the tlv that Load to Scene. Files that are displayed "*" is is the state that is not to save changes
are made.
① ② Frame number
③ Frame of the currently selected is displayed with a red frame. Red frame
to be displayed on the inside,
Viewer is the display range on. You can change the position of View when you
drag the frame. The addition of editing the image, displayed in real-time
③ will be updated.
[Right-click menu]
②
[Select All]: Select all of the frame.
[Invert Selection]: You are all selected frame inversion selection.
[Cut]: Cuts the selected frame.
[Copy]: Copies the selected frame.
[Insert Paste]: Insert paste into the frame you have selected the material
that was stored in the Copy.
[Paste Into]: the Copy frames, and frames paste was selected.
[Merge]: the Copy frame, and paste it to the location that corresponds to
the frame number of tlv the currently selected.
[Insert]: a few minutes frame to select that, insert the frame of the sky
(from).
[Delete]: to erase the image of the selected frame. Frame will not be
erased.
[Duplicate Drawing]: Select a few minutes’ frames, and then copy and paste
the bottom of the frame.
[Reverse]: image contents of the selected frame will be the reverse of the
order. Example) 1,2,3 → 3,2,1
[Swing]: and Reverse add the selected frame. Example) 1,2,3,4 →
1,2,3,4,3,2,1
[Step2 ~ 4]: Increase numerical worth of the selected frame. Example) Step2 1,2,3 → 1,1,2,2,3,3
[Each2 ~ 4]: numerically minute thinning cut the selected frame. Example) Each2 1,2,3,4 → 1,3
[Expose in Xsheet]: Adds the selected frame to Xsheet.
[Add Frames]: dedicated window is displayed, and when the numeric input to add a frame of the sky (from).
[Renumber]: Change the frame number of the selected frame.
[Revert to Cleaned Up]: Overrides the selected frame in the data of the No paint.
Cleanup will return immediately after the image.
Finishing work already files in OpenToonz, the case of such as opening a file to be taken using other software, you do
the conversion of the file (conversion) 。
1. Right-click on the file you want to convert in the file browser and select the [Convert] 。
⑥
⑦
⑤ To set the background color. This is usually RGB all 255 (white).
⑥ When checked, if you already have the same file to the destination exists, you create a new file without
⑦ When checked, you can delete the attached to the front of the frame number of the file name of tlv
Example) File Name the "A" Remove dot before the frame number the case of "off": A.0001.tga, A.0002.tga,
A.0003.tga ....
Example) File Name the "A_" Remove dot before frame number in the case of "on": A_0001.tga, A_0002.tga,
A_0003.tga ....
※ only if the file format after the conversion have not selected a tlv, function is enabled.
※ OpenToonz is, between the level name and the last four digits of the frame number "." (Dot) or "_"
(underscore) is in the form of a file, and then recognized as the level of a series.
■ PltEdit
In PltEdit room, create a file of extensive background material and the cell, and edit the palette. Among
the finishing process, and mainly used in the scene to determine the color.
□ when deciding to create the color of the sheet file for performing color specified, to create a sheet of files needed.
1. Load the files and painted tlv files of BG (background material) on the sheet.
Select the column where you want side-by-side on the Xsheet, read the tlv file in the Load Level.
Read the BG in the column of Xsheet 1 (material that becomes the top-back). Other Book materials and each cell will read
the file in the actual stacking order of the time sheet Street. Also read files of the layout for the alignment.
It will move to match the position of the 2.BG to the position of the layout file.
If BG is shifted to the layout, do the alignment.
It shows only the layout and BG.
Select the file (BG) of those who want to move, and move according to the layout using the Edit tool.
※ such as layout files, do not require cell to be displayed in the preview at the time, you can switch the display /
non-display by clicking the [Preview Visibility Toggle] at the top of each cell on the Xsheet.
If there is a 3.Book, move the position as well as the BG.
Select the [Windows / Other Windows / Schematic], to display the Schematic window.
To the other alignment of the Book as a number of column 1 (BG) is, on the Stage Schematic, click and drag the blue of
the Book ● column
It will lead to 1 red ●.
※ If the white edge to the Book at the time of the preview is displayed to select the Book on the FX Schematic, and then
select the right-click menu / Insert FX / Layer Blending / Premultiply]. Also by putting a check in the [Premultiply] of
Select the Book Level Settings You can turn off the edge at the time of preview.
Edit the style by using, for example 4.Style Editor and Studio Palette.
You can also extract the color from the background image in RGB Picker tool.
Run the preview, it is also possible to check the screen of the state multiplied by the processing.
□ To display only the necessary frame
Or arrange only the necessary number to Xsheet, use the Sub-Xsheet, it is also possible to preview the only sheet number
required.
[How to create a Sub-Xsheet]
Cell to select all you want to include, and then select the right-click menu / Collapse]. The following alert window is
displayed.
· Include relevant pegbars in the sub-xsheet as well. ... Also information of Pegbar including in Sub-Xsheet.・Include
only selected columns in the sub-xsheet. ... Information of Pegbar is not included in the Sub-Xsheet。
Sub-Xsheet appear in purple on Xsheet.
In a state in which the folded in Sub-Xsheet, you driving the sheet number you want to preview. □ Daburashi add effects
in a simple manner on the Schematic be previewed in such a transparent display shadow.
1. Process by copying the cell to which you want to apply it side-by-side two the same cell to Xsheet.
2. FX Schematic, select the cell, and then select each [right-click menu / Insert FX / Toonz Level / Palette Filter].
Once the FX has been added, and then double-click the FX. Setup screen appears.
[Color Indexes]: Enter the style number of the
shadow.
[Action]: one selects the keep, the other cell,
select Delete。