Professional Documents
Culture Documents
Dfs Tests For Wipair8000-5.5Ghz
Dfs Tests For Wipair8000-5.5Ghz
5GHz
RADAR_TEST_SIGNAL_D.3
dBm Trace A
-45
-50 1 2-1
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-1uS_PRF-700_BURST-18
Start: 0 s Stop: 30.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 30.00 ms
28/4/2015 11:36:26 AM CF: 5.500000 GHz E7405A
-50 1 2-1
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-0.5uS_PRF-1000_BURST-10
Start: 0 s Stop: 30.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 30.00 ms
28/4/2015 11:39:06 AM CF: 5.500000 GHz E7405A
RADAR_TEST_SIGNAL_D.4_# 2
dBm Trace A
-45
1 2-1
-50
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-3uS_PRF-200_BURST-15
Start: 0 s Stop: 100.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 100.00 ms
28/4/2015 11:57:29 AM CF: 5.500000 GHz E7405A
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-10uS_PRF-3000_BURST-25
Start: 0 s Stop: 15.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 15.00 ms
28/4/2015 12:01:43 PM CF: 5.500000 GHz E7405A
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-30uS_PRF-3000_BURST-20_Modulated PRF
Start: 0 s Stop: 15.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 15.00 ms
28/04/2015 3:51:16 PM CF: 5.500000 GHz HP8593E
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-1.4uS_PRF-350&400_BURST-10
Start: 0 s Stop: 30.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 30.00 ms
28/4/2015 1:32:11 PM CF: 5.500000 GHz E7405A
-55
-60
-65
-70
-75
-80
-85
-90
-95
PW-0.9-1.2uS_PRF-400_500_800_BURST-15
Start: 0 s Stop: 30.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 30.00 ms
28/4/2015 1:38:17 PM CF: 5.500000 GHz E7405A
Tests with a radar burst at the beginning of the Channel Availability Check Time
F=5.5GHz
-62dBm+10dBi +10dBm=-42dBm.
Radar burst, injected to UUT at T1+2 [sec], using radar test signal #1 as defined in table D.3 of ETSI EN 301
893 V1.7.1
1) “DFS Detected.”
2) Operational mode: Scanning (5.700 GHz). (Channel availability check on new channel).
After 61 [sec]), Operational mode changed to Online the UUT start transmission on the new channel, 5.700GHz,
Tests with a radar burst at the end of the Channel Availability Check Time
F=5.5GHz
-64dBm+10dBi +10dBm=-42dBm.
Radar burst, injected to UUT at T1+58 [sec], using radar test signal #1 as defined in table D.3 of ETSI EN
301 893 V1.7.1
1) “DFS Detected.”
2) Operational mode: Scanning (5.700 GHz). (Channel availability check on new channel).
After 61 [sec]), Operational mode changed to Online the UUT start transmission on the new channel, 5.700GHz,
Interference Detection Threshold (during the Channel Availability Check)
Master mode. For channels outside the 5 600 MHz to 5 650.
UUT completed power up sequence after 1 sec =T1.
UUT Unit Manager indicates Operational mode “Scanning (5.5000 GHz)”
F=5.5GHz
-62dBm+10dBi =-52dBm.
Radar burst, injected to UUT at T1 + 10 [sec], using radar test signal #1 as defined in table D.4 of ETSI EN 301
893 V1.7.1
1) “DFS Detected.”
2) Operational mode: Scanning (5.700 GHz). (Channel availability check on new channel).
3) After 61 [sec]), Operational mode changed to Online the UUT start transition on the new channel, 5.7000GHz.
*This test was repeated 20 times for radar signals 1,2,5 and 6 as defined in table D.4 of
ETSI EN 301 893 V1.7.1. Detection probabilities are described in the table below:
F=5.60GHz
-62dBm+10dBi+10 =-42dBm.
Radar burst, injected to UUT at T1 + X [sec], using radar test signal #1 as defined in table D.4 of ETSI EN 301
893 V1.7.1. Were X=any time during 10 minutes of Channel Availability Check
1) “DFS Detected.”
2) Operational mode: Scanning (5.640 GHz). (Channel availability check on new channel).
3) After 61 [sec]), Operational mode changed to Online the UUT start transmission on the new channel, 5.640GHz.
*This test was repeated 20 times for radar signals 1,2,5 and 6 as defined in table D.4 of
ETSI EN 301 893 V1.7.1. Detection probabilities are described in the table below:
In-Service Monitoring
dBm Trace A
0 2-1
1
-10
-20
-30
-40
3-1
-50
-60
-70
-80
-90
-100
UUT_TX data to slave during tests
Start: 0 s Stop: 20.0000 ms
Res BW: 3 MHz Vid BW: 3 MHz Sweep: 20.00 ms
8/11/2009 4:27:57 PM CF: 5.500000 GHz HP8593E
Radar burst, injected to UUT using radar test signal #1 as defined in table D.4 of
ETSI EN 301 893 V1.7.1
1) “DFS Detected.”
2) Operational mode: Scanning (5.700 GHz). (Channel availability check on new
channel).
3) After 61 [sec]), Operational mode changed to Online, the UUT start transmission
the new channel, 5.7000GHz.
*This test was repeated 20 times for each type of radar signals defined in table D.4 of
ETSI EN 301 893 V1.7.1.
Detection probabilities are described in the table below:
Radar Pulse PRF [pps] Pulses per # Of Detection
test signal width burst different probability
[µs] PRF
1 0.8 1000 10 1 100%
2 5 200 15 1 100%
3 10 3000 25 1 100%
4 30 2500 20 1 100%
5 1.4 320,400 10 2 100%
6 0.9-1.2 400,500,800 15 3 100%
UUT was set to scan for available channel only at channel 5.500GHz.
-62dBm+10dBi +10dBm=-42dBm.
Radar burst, injected to UUT using radar test signal #1 as defined in table D.3 of
ETSI EN 301 893 V1.7.1
1) “DFS Detected”
2) Operational mode: Scanning (5.500 GHz). (Channel availability check on new channel).
No transmission/output power was observed during 1sec of Channel closing transmission Time.
No transmission/output power was observed during 10 sec of Channel Move Time.
UUT stayed in Scanning (5.500 GHz) mode for 30 minutes equal to Non-Occupancy Period limit.
After 30 minutes the unit changed its operational mode to Online CH 01.
-20
-30
-40
1
2-1
-50
-60
-70
-80
-90
-100
-110
Channel Closing Time at 300 mSec span
Start: 0 s Stop: 200.0000 ms
Res BW: 1 MHz Vid BW: 1 MHz Sweep: 300.00 ms
28/4/2015 11:06:35 AM CF: 5.500000 GHz E7405A
-20 1
-25
-30
-35
-40
-45
-50
-55
2-1 3-1
-60
-65
Channel Move Time at 11 Sec span
Start: 0 s Stop: 11.0000 s
Res BW: 1 MHz Vid BW: 1 MHz Sweep: 11.00 s
28/15/2015 11:22:24 AM CF: 5.500000 GHz E7405A
In-Service Monitoring.
A link was established between the Slave unit to the Master unit,
utilizing more then 30% of UUT transmitting time.
-20
-30
-40
-50
3-1
-60
-70
-80
-90
-100
-110
Slave TX Duty Cycle
Start: 0 s Stop: 15.0000 ms
Res BW: 1 MHz Vid BW: 3 MHz Sweep: 15.00 ms
28/4/2015 12:09:59 PM CF: 5.500000 GHz E7405A
-62dBm+10dBi =-52dBm.
Radar burst, injected to UUT using radar test signal #1 as defined in table D.4 of
ETSI EN 301 893 V1.7.1
*This test was repeated 20 times for each type of radar signals defined in table D.4 of
ETSI EN 301 893 V1.7.1. Detection probabilities are described in the table below:
UUT was set to scan for available channel only at channel 1, 5.5GHz.
-62dBm+10dBi +10dBm=-42dBm.
Radar burst, injected to Master using radar test signal #1 as defined in table D.3 of
ETSI EN 301 893 V1.7.1
No transmission/output power was observed during 1sec of Channel closing transmission Time.
UUT stayed in scanning CH (5.500 GHz) mode for 30 minutes equal to Non-Occupancy Period limit.
-20
1
-30
-40
2-1
-50
-60
-70
-80
-90
-100
-110
UUT Slave Closing time
Start: 0 s Stop: 350.0000 ms
Res BW: 1 MHz Vid BW: 3 MHz Sweep: 350.00 ms
28/4/2015 12:15:03 PM CF: 5.500000 GHz E7405A
-20
-30
-40
-50
2-1 3-1
-60
-70
-80
-90
-100
-110
Slave Channel Closing Time at 11 Sec span
Start: 0 s Stop: 11.0000 s
Res BW: 1 MHz Vid BW: 3 MHz Sweep: 11.00 s
28/4/2015 12:21:45 PM CF: 5.500000 GHz E7405A