dy Chmox surmise. — Centro di taratura
Via Matin estema, 18 - 41012 Carpi - Modena - Telefono 059-663006 - Fax 059.663128
Report of Calibration Number 09-RT-246
Number ofpages 3
Date of issue 14.12.2009
Customer MARCHESINIGROUPS.p. Stab di Latina
Customer Address Via Beli, 1S = 08100 Latina (LI)
Instrument ‘Themometic chains fortwo welding rollers
Manufacturer MARCHESINI GROUP S.p..
Model ‘Strip Packaging Machine MST200
Serial number 2080005
Measurements performed on 10-12.2009
Performing site MARCHESINI GROUP S.p.A., Latina (LT) ~ Via Belioe, 15
The measurement results reported in this certificate were obtained following the procedures
reported in the following rages (logether with the first line standards which begin the
‘traceability chain and their valid cerifictes of calibration.
The measurement uncertaimies stated inthis document are estimated atthe level af twice the
standard devietion (corresponding inthe case of normal distribution, to a confidence level of
‘abou 9336
Head ofthe Centre
JSR ady Cuox. urrmmersu. Centro di taratura
Via Malini estema, 18 - 41012 Carpi - Modena - Telefono 059-563006 - Fax 059-663128
Report of calibeation Nr 09:R7-246
‘The measurement results reported inthis report were obtained following the procedutes ofthe
Centre NR, PTO1, PTOZE.
"he traceability chain to international standards begins from the fist line standard and theit
valid eertticates of calibration
Platinum Resistance thermometer ROSEMOUNT 162CE id. n, TRISISR, certificate N. 08-
1173.01 UNRIM),
‘multimeter HP 34584 id. n, EMIOO1, certificate 09-2081173480-1 (SIT-05 Agilent)
ration pre Laborator i em
Scope of this testis to calibrate the instruments in item by comparison with a reference
Standard: citer the probes under fest and the reference standard were patted into the well of
Portable calibration furnace, mod, MT-l, sn. 11-00-005, at a depth. of 150mm,
‘A precise temperature meter, mod. ISO-CAL 9000+, THERMO ELECTRIC: sin, 23787, was
‘sed in conjunction with a ype PL100 RTD probe , sn, TR74 the chain was SIT cenfied
(certificate n. 09-81-2231 issied on 23.11.2009)
Calibration was caried out in the range + 15°C around the mean working temperature
indicated by Marchesini Grcup SpA. 3 tempersture points was selected and measured from
the lower othe higher ones
‘Uncertainty in the temperature measurement
‘The expanded value of uncertainty (2 sigma) is determined by evaluating, the uncertainty
contributions ofall the paraneters affecting the measurement: it comprises the uncertainty