Professional Documents
Culture Documents
Owner’s Manual
1 Version A
INTRODUCTION
Computer
Safety key
Handle bar
Upright post
Motor cover
Side rail
Running belt
Rear cover
Owner’s Manual 1
KEY FEATURES
This treadmill is especially designed to give you reliable performance and enjoyable workout in the
comforts of your home. Please find below the features and benefits of this treadmill.
◇ LED or LCD console let you read the digital easily to know your exercise information.
◇ Low impact design with cushions, and PU roller so that your joints are protected against
possible injury.
TECHNOLOGY DATA
Unfolding:2005*949*1520MM
Horsepower 2.5HP
Speed 1.0-20.0Km/h
Weight 127KG
Function Running
◇ Remark: Our company retain the priority of revision not to advise in advance.
CAUTION:
Before beginning any exercise program always consult your physician. If you experience chest pains,
nausea, dizziness or shortness of breath, stop exercising and consult your physician before continuing.
Owner’s Manual 2
IMPORTANT SAFETY PRECAUTIONS
GROUNDING INSTRUCTIONS
This product must be grounded! If treadmill should malfunction or breakdown, grounding provides a
path of least resistance for electrical current to reduce the risk of electrical shock. The product is
equipped with a cord having an equipment-grounding conductor and a grounding lug. This plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with local codes and ordinances.
DANGER! Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product- if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
ELECTRICAL SAFETY
To reduce the risk of burns, fire, electrical shock, or injury to persons, take the following
precautions.
● When plugged in, do not leave the treadmill unattended at any time. Unplug the treadmill from
the power source when it is not in use.
● Do not use the treadmill if the unit is wet or the plug or cable is damaged or the treadmill is not
working properly. Do not use a damaged or defective equipment.
● Keep the power cable and plug away from heated surfaces.
● Never place the power cord under carpeting or place any object on top of the power cord.
● Use only the power cord provided with this treadmill
● Please turn the switch to the “off” position before shut down power supply, then remove the plug
from the outlet.
This exercise equipment is designed and built for optimum safety for the home use. However,
certain precautions always apply whenever you operate any exercise equipment. Be sure to read
the entire manual before assembly and operation of this machine. Also, please note the following
safety precautions.
WARNING!
Connect this unit to a properly grounded outlet only. Please using special circuit with special power
supply, plug with power supply must be connected with earth.
Owner’s Manual 3
MECHANICAL SAFETY
● Before you start to exercise, make sure the unit functions correctly. To maintain the safety level
of the exercise equipment does not use a faulty device.
● Replace defective components immediately and/or keep the equipment out of use until repair.
● Inspect the equipment prior to exercising to ensure that all nuts and bolts are fully tightened
before each use.
● Do not use attachments not recommended by the manufacturer.
● Never drop or insert any object into any opening.
● Never activate the speed when someone is standing on the treadmill.
APPROPRIATE ATTIRE
● Always wear appropriate clothing. Do not wear clothing that might catch on any part of this
treadmill
● Always wear non-slippery shoes while working with the treadmill. Do not wear shoes with heels
or leather soles. Check the soles of your shoes and remove any dirt and embedded stones.
CAUTION!
Stop your workout immediately if you feel any painor abnormal symptoms and consult
your physician. .Read this manual before operating this treadmill.
Owner’s Manual 4
ASSEMBLY INSTRUCTIONS
ASSEMBLY TREADMILL
1/ ASSEMBLE THE UPRIGHT POSTS (as picture 1)
Fix each upright post and base frame together with 10pcs bolts (M10*20) for each side.
Do not tighten these bolts until the console frame have been tightened.
(1)
Provide the base frame protect cover to the upright post as the show picture .
(2)
Owner’s Manual 5
3/ ASSEMBLY THE CONSOLE AND UPRIGHT POST(as picture 3)
Fix the upright posts and computer with 3pcs bolts (M10X20) each side
tighten the bolts between upright post and base frame and the holder of computer
(3)
4/ ASSEMBLY THE HANDLE BAR COVER AND THE COMPUTER (as picture 4)
Fix the the handle bar cover and the motor cover with 4PCS ST4*15, Than fix tighten the upright
post and the bottom frame, And than fix the bottom protect cover to the bottom frame with 2pcs of
M5*10.
(4)
Owner’s Manual 6
SETTING UP YOUR TREADMILL
To make exercise a desirable daily activity for you, the treadmill should be placed in a comfortable
and attractive setting. This treadmill is designed to use minimal floor space and to go nicely in your
home.
·Do not place the treadmill outdoors.
·Do not place the treadmill near water or in high moisture content environment.
·Made sure power cord is no tin the path of heavy traffic.
·If your room is carpeted, check the clearance to make sure there is enough space
between the carpet fiber and the treadmill deck. If you are uncertain, it is best to place
mat beneath your treadmill.
·Locate the treadmill at least 4 feet from walls or furniture.
·Allow the safety area of 2m x1m behind the treadmill so that you can easily get on and
off the treadmill without getting trapped during an emergency.
Occasionally after extended use you will find a black dust below your treadmill. This is normal wear
and does not mean there is anything wrong with your treadmill. This dust can be easily removed
with a vacuum cleaner. If you wish to prevent this dust from getting on your floor or carpet, place a
mat beneath your treadmill.
CAUTION!
Make sure the running deck is level to the ground. If the deck is positioned on uneven surface,it would
cause premature damage to the electronic system.
Owner’s Manual 7
GETTING STARTED
TURN POWER ON
The On/Off switch for the treadmill is located next to the power supply cord at the back of the motor
cover. Flip this switch to the “ON” position.
Your treadmill will not start unless the safety key is properly inserted into the key holder in the
middle of the console. The other end of the safety key should be securely clipped to your clothing
so that in the case that you fall, you will pull the safety key from the console, which will stop the
treadmill immediately to minimize injury. For your safety, never use the treadmill without securing
the safety key clipped to your clothing. Pull on the safety key clip to make turn it will not come off
your clothing.
During exercise, keep your body and head facing forward at all times. Never attempt to turn around
on the treadmill when the running belt is still moving. When you have finished exercising, stop the
treadmill by pressing the red stop button. Wait until the treadmill comes to a complete stop before
attempting to get off the treadmill.
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the belt when the speed is no more than 3km/h.
Owner’s Manual 8
HANDLING YOUR TREADMILL
Cylinder
Wheel
Pedal
Owner’s Manual 9
LED OPERATING THE CONSOLE
LED Window
Program button
Incline + Speed +
Incline - Speed -
Owner’s Manual 10
I: Incline quick button : 2%,4%,6%,8%,10%,12%,14%,15%, when the motor is running ,press
these incline quick button directly to select the incline you need .
2: Program instruction :
A :Program instruction
(1) : Manual Mode (p00) include : Normal Mode ,Time reciprocal , Distance
reciprocal ,Calories reciprocal,
(2) : 8 Program Mode : P01,P02,P03,P04,P05,P06,P07,P08;each program has 3
Modes,each modes has three Programs ,each programs classify L1,L2,L3 .
(3): Three user-defined Mode :U01 ,U02,U03.
(4): One body fat program
3:Manual Program :
(1):How to enter to Manual Program ?
A: Turn on the switch ,the machine will enter into the Normal Mode of the Manual Program .
B: When the machine is stopped ,press “program “ than will enter in to the Manual Program .
(2) :The three setting functions under the Manual Program :Time reciprocal setting ,Distance
setting , Calories setting
A: When start enter in to the Manual program setting ,the time display window will display 0:00.
B: When under Manual Program setting ,press “Program” than will enter into “Time reciprocal
Mode”, the time display window will display the time ,and shining ,the initialization time is
30:00,the middle window will display “adjust time then press start” .than press “Speed + /- ” to
setting the time you want ,the time setting range is “5:00-99:00”.press “start/stop” can enter into
“Time reciprocal program to run the motor .the middle window will display raceway ,400M for one
round .
C: When under Time reciprocal program ,press “Program “ than will enter into “Distance
reciprocal program”,the initialization distance will show 1.00 kilometer ,press “speed+/-“ to set the
distance you want ,the distance range is 1.00-99.0kilometer .The middle window will show
“Adjust distance then press start”, than the distance window will be shining .
D: When under the distance reciprocal Mode ,press “Program” than will enter into Calories
reciprocal Mode ,the calories window will display “50 therm”,press “speed +\- “ to set the calories
range you want ,the calories range is :20-999.0 therm. The middle window will display “adust
calories than press start” ,and the calories window will be shining .
E: When under the time counting program ,can not set anything .just can show the time of the
motor running .
F: When under the time counting program , time counting down program, distance counting down
program, calories counting down program ,the counting down is finished ,than the middle window
will display “END-PRESS ,PROGRAM KEY TO SELECT PROGRAM”.
Owner ’s Manual 11
(3):operation of manual mode
a. Press “start” key, than the time will count down the for 5 second, then the motor is running,
the initialization speed is 1.0km/h
b. Press speed +, speed – to adjust the speed.
c. Press incline +,,incline – to adjust the incline.
d. When the motor is running, press the stop key, the motor will be stopped.
e:Press the start/stop key again, the motor will runs ,and the init ialization speed will be
1.00km/h.
f. Press quick speed , and the value will comply with the quick key you press.
g. Pull the safety key can stop the motor runn ing, the speed window will display E07, with
bi-bi-bi sound.
h. When the setting time is decreasing to st op ,and the machine will bi-bi for 10 times until
stopped; the middle window will display “END –PRESS ,PROGRAM KEY TO SELECT PROGRAM”,
Than press “program “to reset the program .
i. The distance will decrease to stop and the bi-bi sounds 10 times every second when the
speed decreases to zero; the middle window will display “END –PRESS ,PROGRAM KEY TO
SELECT PROGRAM”, Than press “program “to reset the program .
j. The calories will decrease to stop and the bi-bi sounds 10 times every second when the set
speed decreases to zero; the middle window will display “END –PRESS ,PROGRAM KEY TO
SELECT PROGRAM”. Press ”program” key, Than press “program “to reset the program .
4. PROGRAM OPERATION:
(1): Press the “program” key ,the initial time show 30mins, the time setting range
is :5:00-99:00,Press speed+/- key to adjust the time value. If you press “program” key ,the time
window will display L1,than press “speed+\-“,key ,you will have to option to sporting :L2 and L3.L2
will be 1.2KM/H higher than L1 ,and L3 will be 2.4km/h higher than L1.
(2): Press start key, the motor will be run , the speed will be according to program initialization
setting .
(3): Press speed +/- to adjust speed you want .
(4): Press incline +,- to adjust incline you want
(5): Press quick speed key to the set speed you want .
(6): Press quick incline key to the set incline you want .
(7): Each program divide into 20 segments, the time of each segment will be 1/20 of the total .
(8): When the program segment change, the buzzer will sounds beep—beep— for 3 times .
(9): When the motor is running, press stop key, the motor will stop running, each parameter will
not change.
(10): Press start key, the speed will be increased from 1km/h to the value of the setting speed
which display on the window
(11): when the time decrease and reach zero, the motor will slow down and stop﹐the buzzer
sounds beep—beep—for 15 time ; the middle window will display “END-PRESS PROGRAM KEY
TO SELECT PROGRAM”, than Press “Program” to reset the program you want .
(12):Take off the safety key, the motor will stop running , and the speed window will be display
E07,the buzzer will sounds bi-bi-bi all the time until you put on the safety key.
Owner’s Manual 12
(1):Press the “program “key than will enter in to U0I ,U02 ,U03 program .
(2): Press “Mode” key will enter into the speed and incline setting ,the speed window and the
incline window will display the speed and the incline ,than press “speed +\-“ to select the speed you
want and press the “incline +/-“ to select the incline you want . when press “MODE key to last
segment, than press “start/stoy” the treadmill will be stopped running .if did not press “MODE “to the
last segment ,the treadmill will not stopped running .when the program is running to adjust the
time ,the middle window will display “ADJUST TIME THEN PRESS START”, after you have setting
the time ,the motor will runs .when the program is finished ,the middle window will display “END
–PRESS PROGRAM KEY TO SELECT PROGRAM”.
6. BODY FAT TEST FUNCTION:
(1):When the treadmill is stopped ,press “program” key to select the body fat testing program .
(2):When the figure display on the distance window is the setting value ,than the middle
window will display some English to instruct .
(3):When you enter in to body fat program ,the distance window will display :01, than you
need to select the male or female you are , press “speed+/-“key to select . 01(male);02(female).the
middle window will display “enter sex” to remind you to select the sex you are .
(4):Press “mode” key ,the distance window will display :25,than you need to select the age
you are ,press “Speed +/-“ to select ,the age range is :1-99 ,the middle window will display “enter
age”, to remind you to select the age you are .
(5):Press “mode “key ,the distance window will display :170,than you need to select the
stature you are ,the stature range is :100-200cm. the middle window will display the “enter high” to
remind you to select the stature you are .
(6): press “mode” key ,the distance window will display :70, than you need to select the weight
you are ,the weight range is :20-150kgs, the middle window will display “enter weight “to remind you
to select the weight you are .
(7):Press “mode” key ,the distance window will display :00,means you have enter into the
body fat test function ,than you put your two hands on the handle pulse which on the handle
bar ,than the distance window will display the value of your body fat after 8 seconds .the middle
window will display “FAT TEST “.
(8): According to the Asian standard, slim means fat is lower than 18, between 18 and 23 is
ideal weight, between 23 and 28 is overweight, to be higher than 29 is obesity.
7. SAFETY KEY FUNCTION
Anytime you take off the safety key , stop the motor peremptorily, the time windows display:E07
and sounds “Beep-Beep-Beep” all the time.
8.PRARMETER :
INITAL INITIAL SETTING SETTING RANGE DISPLAY RANGE
9.PROGRAM TABLE
Owner’s Manual 13
P01-L1 P01-L2 P01-L3 P02-L1 P02-L2 P02-L3
NO. Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline
0 2.0 0 3.2 0 4.4 0 2.0 0 3.2 0 4.4 0
1 3.0 1 4.2 1 5.4 1 4.0 2 5.2 2 6.4 2
2 3.0 2 4.2 2 5.4 2 4.0 2 5.2 2 6.4 2
3 4.0 2 5.2 2 5.4 2 5.0 2 6.2 2 7.4 2
4 5.0 2 6.2 2 7.4 2 6.0 2 7.2 2 8.4 2
5 3.0 2 4.2 2 5.4 2 4.0 3 5.2 3 6.4 3
6 4.0 3 5.2 3 6.4 3 6.0 3 7.2 3 8.4 3
7 5.0 3 6.2 3 7.4 3 6.0 2 7.2 2 8.4 2
8 5.0 2 6.2 2 7.4 2 6.0 2 7.2 2 8.4 2
9 3.0 1 4.2 1 5.4 1 4.0 2 5.2 2 6.4 2
10 4.0 2 5.2 2 6.4 2 5.0 2 6.2 2 7.4 2
11 5.0 2 6.2 2 7.4 2 6.0 2 7.2 2 8.4 2
12 4.0 2 5.2 2 6.4 2 4.0 3 5.2 3 6.4 3
13 4.0 1 5.2 1 6.4 1 4.0 3 5.2 3 6.4 3
14 4.0 1 5.2 1 6.4 1 4.0 3 5.2 3 6.4 3
15 2.0 3 3.2 3 4.4 3 2.0 4 3.2 4 4.4 4
16 3.0 3 4.2 3 5.4 3 2.0 4 3.2 4 4.4 4
17 3.0 2 4.2 2 5.4 2 5.0 3 6.2 3 7.4 3
18 5.0 2 6.2 2 7.4 2 4.0 2 5.2 2 6.4 2
19 3.0 0 4.2 0 5.4 0 2.0 0 3.2 0 4.4 0
Owner’s Manual 14
P05-L1 P05-L2 P05-L3 P06-L1 P06-L2 P06-L3
NO. Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline
0 2.0 0 3.2 0 4.4 0 2.0 0 3.2 0 4.4 0
1 4.0 3 5.2 3 6.4 3 4.0 5 5.2 5 6.4 5
2 4.0 3 5.2 3 6.4 3 4.0 5 5.2 5 6.4 5
3 5.0 4 6.2 4 7.4 4 4.0 5 5.2 5 6.4 5
4 6.0 4 7.2 4 8.4 4 5.0 4 6.2 4 7.4 4
5 7.0 5 8.2 5 9.4 5 6.0 4 7.2 4 8.4 4
6 7.0 5 8.2 5 9.4 5 8.0 4 9.2 4 10.4 4
7 5.0 5 6.2 5 7.4 5 8.0 3 9.2 3 10.4 3
8 6.0 4 7.2 4 8.4 4 6.0 3 7.2 3 8.4 3
9 7.0 4 8.2 4 9.4 4 7.0 3 8.2 3 9.4 3
10 8.0 4 9.2 4 10.4 4 8.0 3 9.2 3 10.4 3
11 8.0 4 9.2 4 10.4 4 8.0 4 9.2 4 10.4 4
12 5.0 5 6.2 5 7.4 5 6.0 4 7.2 4 8.4 4
13 4.0 5 5.2 5 6.4 5 4.0 4 5.2 4 6.4 4
14 3.0 3 4.2 3 5.4 3 4.0 3 5.2 3 6.4 3
15 3.0 3 4.2 3 5.4 3 2.0 3 3.2 3 4.4 3
16 6.0 3 7.2 3 8.4 3 5.0 3 6.2 3 7.4 3
17 5.0 2 6.2 2 7.4 2 4.0 4 5.2 4 6.4 4
18 4.0 2 5.2 2 6.4 2 3.0 3 4.2 3 5.4 3
19 2.0 0 3.2 0 4.4 0 2.0 0 3.2 0 4.4 0
Owner’s Manual 15
LCD OPERATING THE CONSOLE
LCD Window
Mode
Incline +
Speed +
Incline -
Speed -
Start / Stop
3:Manual Program :
(1):How to enter to Manual Program ?
A: Turn on the treadmill ,the machine will enter into the Normal Mode of the Manual Program .
B: When the machine is stopped , press “program “ to select the Normal Mode of the manual
program.
(2) :There are three setting functions under the Manual Program :Time reciprocal
setting ,Distance setting , Calories setting
A: At the beginning of start to enter in to the Manual program setting ,the time display window
will display :0:00, and than will also display “press program or mode or start” under the
raceway window .
B: When under Manual Program setting ,press “Program” than will enter into “Time reciprocal
Mode”, the time display window will display the time ,and shining ,the initialization time is
30:00,press “speed+/- “ to select the time you want ,the time setting range
is :5:00-99:00,than will display “adjust value to press start” under the race way .
C: When under Time reciprocal mode ,press “Program “ than will enter into “Calories
reciprocal program”, the initialization Calories will show 50 therm ,press “speed+/-“ to
set the distance you want ,the Calories range is 50-990 therm,will remind “adjust value to
press start “under the raceway .
D: When under the Calories reciprocal Mode ,press “Program” than will enter into distance
reciprocal Mode ,the initialization distance will show 1.0km,press the speed+/- to adjust the
distance you want .the distance range is :1.0-99.0,will remind “adjust value to press start
“under the raceway .
Owner’s Manual 17
(8). When the setting time is decreasing to stop ,and the machine will bi-bi for 15times until
stopped, Than press “program “to reset the program .
(9). The distance will decrease to stop and the bi-bi sounds 15times every second when the
speed decreases to zero; Than press “program “to reset the program .
(10). The calories will decrease to stop and the bi-bi sounds 15times every second when the
set speed decreases to zero; Press ”program” key, Than press “start “to reset the program .
5: PROGRAM OPERATION:
(1): Press the “program” key ,the initial time show 30mins, the time setting range
is :5:00-99:00,Press speed+/- key to adjust the time value. If you press “program” key ,the time
window will display L1,than press “speed+\-“,key ,you will have to option to sporting :L2 and
L3.L2 will be 1.2KM/H higher than L1 ,and L3 will be 2.4km/h higher than L1.
(2): Press start key, the motor will be run , the speed will be according to program
initialization setting .
(3): Press speed +/- to adjust speed you want .
(4): Press incline +,- to adjust incline you want
(5): Press quick speed key to the set speed you want .
(6): Press quick incline key to the set incline you want .
(7): Each program divide into 20 segments, the time of each segment will be 1/20 of the
total .
(8): When the program segment change, the buzzer will sounds beep—beep— for 3 times .
(9): When the motor is running, press stop key, the motor will stop running, each parameter
will not change.
(10): Press start key, the speed will be increased from 1km/h to the value of the setting
speed which display on the window
(11): when the time decrease and reach zero, the motor will slow down and stop﹐the buzzer
sounds beep—beep—for 15 time ; the middle window will display “END-PRESS PROGRAM KEY
TO SELECT PROGRAM”, than Press “Program” to reset the program you want .
(12):Take off the safety key, the motor will stop running , the LCD window will display
“safety key”
,the buzzer will sounds bi-bi-bi all the time until you put on the safety key.
Owner’s Manual 18
(6): press “mode” key ,the distance window will display :70, than you need to select the weight
you are ,the weight range is :20-150kgs, the middle window will display “enter weight “to remind you
to select the weight you are .
(7):Press “mode” key ,the distance window will display :00,means you have enter into the
body fat test function ,than you put your two hands on the handle pulse which on the handle
bar ,than the distance window will display the value of your body fat after 8 seconds .the middle
window will display “FAT TEST “.
(8): According to the Asian standard, slim means fat is lower than 18, between 18 and 23 is
ideal weight, between 23 and 28 is overweight, to be higher than 29 is obesity.
8:PRARMETER:
INITAL INITIAL SETTING SETTING RANGE DISPLAY RANGE
Owner’s Manual 19
EXERCISE TIPS AND GUIDELINES
STRETCH
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury.
Ease into each of these stretches with a slow gentle motion. Hold for a count of ten. Do not
bounce. Repeat the stretch exercises again after the cool down will help to loosen and relax your
muscles to prevent soreness.
WARM UP
The first five minutes of a work out should be devoted to warming up. This warm up will limber your
muscles and prepare them for more strenuous exercise. Warm up on the treadmill by walking at
slow speeds.
COOL DOWN
Never stop exercising suddenly. A cool down period of about 5 minutes will allow your heart to
readjust to the decreased demand. Use a low speed setting during the cool down to gradually lower
your heart rate.
HOW OFTEN?
It is most often recommended that you exercise at least three to four times a week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal
faster with more frequent exercise. Whether it is three days or six days, remember that your
ultimate goal should be to make exercise a lifetime habit.
HOW LONG?
For aerobic exercise benefits, it is recommended that you exercise for about thirty minutes per
session. Always start slowly, especially if you have been sedentary during the past year. In the
beginning you may began with as little as five minutes per session. Your body will need time to
adjust to the new activity. As your body adjusts, gradually increase your workout time per session.
If your goal is weight loss, a longer exercise session at lower intensities has been found to be most
effective. A workout time of 45-50 minutes or more is recommended for best weight loss results.
HOW HARD?
How hard you work out is determined by your goal. Regardless of your fitness goals, always begin
an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by evaluating your perceived
exertion level and the second is by monitoring your heart rate.
>>>
CAUTION!
Always consult your physician before beginning any
exercise program.
Owner’s Manual 20
MAINTENANCE
CLEANING
Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and clean the
floor with vacuum periodically will help to prolong the treadmill product life.
Never use solvents on the deck or running belt. Use of solvents can reduce critical lubrication of the
deck and belt.
After making the adjustment walk on the belt for five minutes to test. If necessary, repeat the
procedure but never turn the bolts more than 1/4 turn at a time. Over tightening the belt can
significantly shorten the belt life.
Owner’s Manual 21
DRIVE BELT TENSIONING ADJUSTMENT
If you have tensioned the running belt and are still experiencing a slipping sensation, call your
dealer. Only an authorized dealer should perform tensioning of the drive belt.
To check the lubrication level, simply lift the running belt, and put your hand as far into the center of
the belt as you can reach. If your hand shows signs of silicone, then it does not need additional
lubrication. If the board feels dray and there is very little evidence of silicone on your hand, then
additional lubrication should be added.
CAUTION!
Over tightening of the belt will severely shorten the life of the belt and may cause further damage to
other components.
NOTE:
A well lubricated deck will ensure longevity of your treadmill in addition to providing you with the
optimal performance.
DANGER!
To reduce the risk of electrical shock, always unplug the treadmill from the electrical outlet
immediately after use and before cleaning.
Owner’s Manual 22
THE ADJUSTMENT OF THE MOTOR BELT
Before all the machine leaving the factory, it’s in the best position, but after a period running,
the belt may become loose.
Adjust Screw
调整螺丝
电机
Motor
Belt
皮带
Front
前滚筒 roller
Attention:
Please turn off the machine when you adjust the
motor belt
Periodically tidy up the leather belt and leather belt
round grooves to sweep.
Owner’s Manual 23
EXPLODED DRAWING
36
84 85
26 31 14 76
15 31
39 31
81 15 80
47 4 41
71 31 46
31
53 71 79
39 23
48 52 29 35
82 39
30 25 83
49 39 28
29 90 35
32 51 24 62
32 29
32 35
32 54 28 27
32 50 40 61
33 75 89 35
32 40
32
96 33 78 74 35 27
7 32
77 72 28
95 29 54 86
30 96 98
32 50 32 33 33 87 35
33
96 92 21 28
94 15 35
21 39
32 15 30 96 91 22
2 73 62 35
15 21 98
6 66 72
21 39
22
5 15 93 73
72
64
58 34
15 21
56 63
10 21 65
15 21 34 30
37
9 34
57 34
65 30 17
30 34 30
34
37 68 21 34 67
55 21 34 43
59 30 43
43 34
69 39 43 21
39 20 17 67
18
8 12 11
1 19 45 44
13 39
16 43
38 37 97 88 20
59 42 21 43
60 68 21 43 39 39 39
21 21 97
37 43
3 42 39 70 20 88 43
38 39
44 11 39 70 39
13 20
Owner’s Manual 24
PART LIST
ART NAME SPECIFICATION QUANTITY
1 Base frame 1
2 Main frame 1
3 Incline bracket 1
4 Motor Frame 1
5 Left up right post 1
6 Right up right post 1
7 Computer Support Frame 1
8 Pedal Hook 1
9 Fold connector chip right 1
10 Fold connector chip left 1
11 Wheel connector chip 2
12 Circumscribe tube 1
13 Inside 6Corner Screw M10*50 2
14 Inside 6Corner Screw M10*35 1
15 Inside 6Corner Screw M10*20 18
16 Inside 6Corner Screw M8*80 1
17 Inside 6Corner Screw M8*65 2
18 Inside 6Corner Screw M8*60 2
19 Inside 6Corner Screw M8*50 1
20 Inside 6Corner Screw M8*50 4
21 Inside 6Corner Screw M8*10 14
22 Inside 6Corner Screw M8*75 2
23 Inside 6Corner Screw M8*65 1
24 Inside 6Corner Screw M8*30 2
25 Inside 6Corner Screw M8*40 4
26 6Corner Screw M8*40 2
27 Cross screw M8*25 2
28 Cross screw M6*25 4
29 Cross screw M5*20 4
30 Cross screw M5*10 15
31 Cross screw M4*10 11
32 Cross screw ST4*15 12
33 Cross screw ST4*10 8
34 Cross screw ST4*15 20
35 Cross screw ST4*15 8
36 Cross screw ST3*10 2
37 Washer ¢25*¢8.2*2 4
Owner’s Manual 25
38 Washer ¢10 2
39 Washer ¢8 20
40 Washer ¢6*¢20 6
41 Lock washer ¢5 1
42 Lock nut M10 2
43 Lock nut M8 10
44 Powder metal cover ¢17*¢10*31 2
45 Spring 1
46 Running belt 1
47 Computer up cover 1
48 Computer down cover 1
49 Safety key 1
50 Handle bar foam 2
51 Left motor cover 1
Owner’s Manual 26
74 Wire clip 1
75 Wire clip 1
76 Fasten rope 8
77 Switch 1
78 Fuse holder 1
79 Control board 1
80 Power cable 1
81 Filter 1
82 Inducement 1
83 Transformer 1
84 Motor 1
85 Incline motor 1
86 Magnetism circle ¢33*¢14*33 1
87 Magnetism circle ¢20* ¢9*32 1
88 Cylinder 2
89 Running board 1
90 Front roller 1
91 Rear roller 1
92 Upright post Cable 1
93 Control board cable 1
94 Left Handle bar cover 1
95 Right handle bar cover 1
96 Washer ¢6 4
97 Insulate cover 2
98 ornamental 2
99
100
101
102
103
104
105
106
Owner’s Manual 27
TROUBLE SHOOTING
2 "E02": the controller can not test the voltage of the motor
Solution: Check the all the cable of the motor is connect well with the control board or not.
3 "E03":The control board can not test the speed of the motor.
Solution :A/ Please check the terminal of the motor and terminal of the inducement if connect
well ,also check the inducement if broken down .
B/ Check the photoelectricity sensor is intact or not.
C/ Check the sensor wire is connect well with the control board or not.
Owner’s Manual 28
OTHER PROBLEM SHOOTING
Treadmill can not start 1. Not plugged in 1. Plug into grounded outlet.
Running belt slips 1. Running belt not tight enough 1. Adjust running belt tension
Owners’ Manual 29
WARRANTY
▪ It remains in the possession of the original purchaser and proof of purchase is demonstrated.
▪ It has not been subject to accident, misuse, abuse, improper service or unauthorized
modifications.
▪ Claims are made within the 12 months manufacturer’s warranty period.
WARRANTY REGISTRATION
The warranty registration must be completed in full. Send or fax this information along with a proof
of purchase to your dealer to keep on file. Your dealer must have this information on file before a
warranty claim can be processed.
Owner’s Manual 30