Professional Documents
Culture Documents
Dear Customers,
in many countries around the world, we have
responsible distributors to provide you the
best service. These partners can be found at
www.maedler.de in the section Branch Offices.
For countries without a distributor, please contact:
MAEDLER GmbH
Export-Department
Traenkestrasse 6 - 8
D-70597 Stuttgart
Germany MÄDLER ® branches worldwide
Phone +49 711 720 95 885
Fax +49 711 720 95 33
export@maedler.de
Page 22 Page 22
® 3
Universal Handles GT from Silicone or Rubber NBR
d5
d4
d3
d1
safe to grip, also with thick gloves. On choice from silicone
for food machines / household sector or from oil-resistant
NBR for general use in mechanical engineering. l1
Temperature range type S: -55°C to +225ºC.
Temperature range type N: -10°C to +100ºC.
Ordering Details: e.g.: Product No. 662 400 04, Universal Handle GT Type S, 25mm
4 ®
Lifting Eye Bolts DIN 580 (Ring Bolts), Steel and Stainless steel, forged version
h
• With CE marking und user information.
Temperature range: -20°C to +200°C.
e
l
Ordering Details: e.g.: Product No. 654 580 06, Lifting Eye Bolt DIN 580, M6, C15E d1 d2
Product No. Product No. Product No. Product No. d1 d2 d3 d4 e h k l m F1 max.* F2 max.* F3 max.* Weight
C15E C15E zinc-pl. Stainless A2 Stainless A4 mm mm mm mm mm mm mm mm mm kg kg kg kg
654 580 06 654 581 06 654 582 06 654 584 06 M6 20 36 20 6 36 8 13 10 75 55 38 0,06
654 580 08 654 581 08 654 582 08 654 584 08 M8 20 36 20 6 36 8 13 10 140 100 70 0,06
654 580 10 654 581 10 654 582 10 654 584 10 M10 25 45 25 8 45 10 17 12 230 170 115 0,11
654 580 12 654 581 12 654 582 12 654 584 12 M12 30 54 30 10 53 12 20,5 14 340 240 170 0,18
654 580 16 654 581 16 654 582 16 654 584 16 M16 35 63 35 12 62 14 27 16 700 500 350 0,28
654 580 20 654 581 20 654 582 20 654 584 20 M20 40 72 40 14 71 16 30 19 1200 860 600 0,45
654 580 24 654 581 24 654 582 24 654 584 24 M24 50 90 50 18 90 20 36 24 1800 1290 900 0,74
654 580 30 654 581 30 - - M30 65 108 60 22 109 24 45 28 3200 2300 1600 1,66
654 580 36 654 581 36 - - M36 75 126 70 26 128 28 54 32 4600 3300 2300 2,65
654 580 42 654 581 42 - - M42 85 144 80 30 147 32 63 38 6300 4500 3150 4,03
F1 F2 ° F3 F
45 °
45
Axially load capacity per Load capacity per lifting Lateral load capacity per Do not use under shear
lifting eye bolt eye bolt at max. 45 ° lifting eye bolt at max. tension
45°
® 5
Lifting Eye Nuts DIN 582 (Ring Nuts), Steel and Stainless steel, forged version
h
Temperature range: -20°C to +200°C.
e
D1 d2
Ordering Details: e.g.: Product No. 654 586 06, Lifting Eye Nut DIN 582, M6, C15E
Product No. Product No. Product No. Product No. D1 d2 d3 d4 e h k m F1 max.* F2 max.* F3 max.* Weight
C15E C15E zinc-pl. Stainless A2 Stainless A4 mm mm mm mm mm mm mm mm kg kg kg kg
654 586 06 654 587 06 654 588 06 654 590 06 M6 20 36 20 8,5 36 8 10 75 55 38 0,05
654 586 08 654 587 08 654 588 08 654 590 08 M8 20 36 20 8,5 36 8 10 140 100 70 0,05
654 586 10 654 587 10 654 588 10 654 590 10 M10 25 45 25 10 45 10 12 230 170 115 0,09
654 586 12 654 587 12 654 588 12 654 590 12 M12 30 54 30 11 53 12 14 340 240 170 0,16
654 586 16 654 587 16 654 588 16 654 590 16 M16 35 63 35 13 62 14 16 700 500 350 0,24
654 586 20 654 587 20 654 588 20 654 590 20 M20 40 72 40 16 71 16 19 1200 860 600 0,36
654 586 24 654 587 24 654 588 24 654 590 24 M24 50 90 50 20 90 20 24 1800 1290 900 0,72
654 586 30 654 587 30 - - M30 65 108 60 25 109 24 28 3200 2300 1600 1,32
654 586 36 654 587 36 - - M36 75 126 70 30 128 28 32 4600 3300 2300 2,08
654 586 42 654 587 42 - - M42 85 144 80 35 147 32 38 6300 4500 3150 3,11
F1 F2 ° F3 F
45 °
45
Axially load capacity per Load capacity per lifting Lateral load capacity per Do not use under shear
lifting eye nut eye nut at max. 45 ° lifting eye nut at max. tension
45°
6 ®
Ring Bolts, Stainless steel, cast version
h
Temperature range: -20°C to +200°C.
e
l
Ordering Details: e.g.: Product No. 654 583 06, Ring Bolt, cast version, M6, A2 d1 d2
D1 d2
Ordering Details: e.g.: Product No. 654 589 06, Ring Nut, cast version, M6, A2
Note
These ring bolts and ring nuts are not according to DIN 580 / DIN 582. The load capacity is not like DIN.
So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications.
Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol.
® 7
Timing Bars, for Timing Belts Profile AT3
De
L1
L
Ordering Details: e.g.: Product No. 163 915 00, Timing Bar AT3, No. of Teeth 15
Profile AT 3
Product No. Number De L1 L Weight Product No. Number De L1 L Weight Product No. Number De L1 L Weight
of teeth mm mm mm kg of teeth mm mm mm kg of teeth mm mm mm kg
163 915 00 15 13,91 100 125 0,05 163 926 00 26 24,42 140 140 0,18 163 944 00 44 41,61 160 160 0,61
163 916 00 16 14,87 100 125 0,06 163 927 00 27 25,37 140 140 0,20 163 948 00 48 45,43 160 160 0,73
163 917 00 17 15,82 100 125 0,07 163 928 00 28 26,33 140 140 0,21 163 950 00 50 47,34 160 160 0,79
163 918 00 18 16,78 100 125 0,08 163 930 00 30 28,24 140 140 0,25 163 952 00 52 49,25 160 160 0,85
163 919 00 19 17,73 140 140 0,10 163 932 00 32 30,15 160 160 0,32 163 956 00 56 53,07 160 160 0,99
163 920 00 20 18,69 140 140 0,11 163 934 00 34 32,06 160 160 0,36 163 960 00 60 56,89 160 160 1,14
163 921 00 21 19,64 140 140 0,12 163 935 00 35 33,01 160 160 0,38 163 965 00 65 61,66 160 160 1,34
163 922 00 22 20,60 140 140 0,13 163 936 00 36 33,97 160 160 0,41 163 970 00 70 66,44 160 160 1,55
163 923 00 23 21,55 140 140 0,14 163 938 00 38 35,88 160 160 0,45 163 972 00 72 68,34 160 160 1,64
163 924 00 24 22,51 140 140 0,16 163 940 00 40 37,79 160 160 0,50 163 984 00 84 79,80 160 160 2,00
163 925 00 25 23,46 140 140 0,17 163 942 00 42 39,70 160 160 0,55 163 996 00 96 91,26 160 160 2,70
Spur Gears with One-Sided Hub, Milled Teeth, Straight Tooth System, Teeth Induction Hardened
da
B
d
B
Ordering Details: e.g.: Product No. 238 881 12, Spur Gear, Hardened, Module 8, 12 Teeth
Reworking within
24h-service possible.
Custom made parts
on request.
8 ®
Locking Assemblies SSGK
Material: Steel.
L
• For fixing a hub (e.g. drive wheel, rotor or L1
similar) on a shaft.
• For low torques.
• Very short version.
• Also suitable for small hub diameters.
D1
D
d
• Not self-centering.
• Not self-locking.
• Axial movement during mounting.
Ordering Details: e.g.: Product No. 615 201 14, Locking Assembly SSGK, 14 mm
T = transmittable torque at F ax = 0.
F ax = transmittable axial force at T = 0.
PW = surface pressure onto the shaft.
PN = surface pressure onto the hub.
TA = fastening torque of slotted nut.
® 9
Locking Assemblies TMK
D
d
• Self-centering.
• With a second hexagon to hold against
while tightening the nut.
SW L1
• Axial offset during mounting
(can be compensated by correct positioning). SW L
10 ®
Locking Assemblies TOK
D
d
• Self-centering.
• Axial offset during mounting
(can be compensated by correct positioning). SW L1
L
T = transmittable torque at F ax = 0.
F ax = transmittable axial force at T = 0.
PW = surface pressure onto the shaft.
PN = surface pressure onto the hub.
TA = fastening torque of the screws.
® 11
Single Direction Thrust Ball Bearings SKF ®, Single Row, inner diameter 10 - 30 mm
d1
D1
D
d
bore), housing ring (with ground outer diameter and bigger bore)
and ball cage with balls. The rings must not be confused with each
other. Temperature range: -30°C to +125°C.
Other versions or sizes on request.
Orderung Details: e.g.: Product No., quantity
For Loctite ®
bonding products
see www.maedler.de
12 ®
Single Direction Thrust Ball Bearings MÄDLER ®, Single Row, inner diameter 10 - 30 mm
d1
D1
D
d
bore), housing ring (with ground outer diameter and bigger bore)
and ball cage with balls. The rings must not be confused with each
other. Temperature range: -30°C to +125°C.
Other versions or sizes on request.
Orderung Details: e.g.: Product No., quantity
For Loctite ®
bonding products
see www.maedler.de
® 13
Pillow Block Bearing Units BK, for Fixed Side, Nickel-Plated
L2 L3 B1 SW
d4
d5
t
Ød
H
H1
d3
E
h
C1 C2 b
L1 L P
B
Material: Housing from steel, all surfaces machined, nickel-plated. Locknut and distance bushes are included. Due to the standard
With quality rolling bearings from Japan. dimensions, these units can also replace parts of other suppliers.
Ready-to-install housing bearing unit for trapezoidal and ballscrew Spindle reworking (on request) and bearing load data see page 17.
spindle drives, for the fixed side. With two angular contact ball Matching counterpart for support side: Pillow Block Bearing BF.
bearings, lightly preloaded, with seals. With 8 mounting holes.
Ordering Details: e.g.: Product No. 642 011 10, Ball Pillow Block Bearing Unit BK 10, Bore 10mm, nickel-plated
* Tolerance ± 0.02mm.
B1
d4
d5
t
d
H
H1
d3
E
h
b
L P
B
Material: Housing from steel, all surfaces machined, nickel-plated. Retaining ring for fixing on the spindle end is included.
With quality rolling bearing from Japan. Due to the standard dimensions, these units can also replace parts
Ready-to-install housing bearing unit for trapezoidal and ballscrew of other suppliers.
spindle drives, for the support side. With one movable single row Spindle reworking (on request) and bearing load data see page 17.
deep groove ball bearing. With 6 mounting holes. Matching counterpart for fixed side: Pillow Block Bearing BK.
Ordering Details: e.g.: Product No. 642 012 10, Ball Pillow Block Bearing Unit BF 10, Bore 8 mm, nickel-plated
With quality rolling bearings from Japan. Spindle reworking and bearing load data page 17.
14 ®
Pillow Block Bearing Units EK, for Fixed Side, Nickel-Plated
L2 L3 B1 SW
d4
Ød
H
h
H1
b
L1 L P
B
Material: Housing from steel, all surfaces machined, nickel-plated. Types EK06 and EK08 sealed only on the side without the nut.
With quality rolling bearings from Japan. With 2 mounting holes. Locknut and distance bushes are included.
Ready-to-install housing bearing unit for trapezoidal and ballscrew Due to the standard dimensions, these units can also replace parts
spindle drives, for the fixed side. With two angular contact ball of other suppliers. Spindle reworking (on request) and bearing load
bearings, lightly preloaded, with seals. data see page 17.
Matching counterpart for support side: Pillow Block Bearing EF.
Ordering Details: e.g.: Product No. 642 013 06, Ball Pillow Block Bearing Unit EK 6, Bore 6mm, nickel-plated
B1
d4
d
H1
h
b
L P
B
Material: Housing from steel, all surfaces machined, nickel-plated. Retaining ring for fixing on the spindle end is included.
With quality rolling bearing from Japan. Due to the standard dimensions, these units can also replace parts
Ready-to-install housing bearing unit for trapezoidal and ballscrew of other suppliers.
spindle drives, for the support side. With one movable single row Spindle reworking (on request) and bearing load data see page 17.
deep groove ball bearing. With 2 mounting holes. Matching counterpart for fixed side: Pillow Block Bearing EK.
Ordering Details: e.g.: Product No. 642 014 06, Ball Pillow Block Bearing Unit EF 6, Bore 6mm, nickel-plated
® 15
Flange Bearing Units FK, for Fixed Side, Nickel-Plated
L L1 L L2
F H H F
90° SW
ØA
ØD
Ød
Ød
LK
B
R0,6 max T1 T2 4 x d4 / d5 x t
E E
Material: Housing from steel, all surfaces machined, nickel-plated. Types FK06 and FK08 sealed only on the cylindrical side. Locknut
With quality rolling bearings from Japan. and distance bushes are included. Due to the standard dimensions,
these units can also replace parts of other suppliers.
Ready-to-install housing bearing unit for trapezoidal and ballscrew
spindle drives, for the fixed side. With two angular contact ball Spindle reworking (on request) and bearing load data see page 17.
bearings, lightly preloaded, with seals. With 4 mounting holes. Matching counterpart for support side: Flange Bearing FF.
Ordering Details: e.g.: Product No. 642 015 06, Flange Bearing Unit FK 6, Bore 6mm, nickel-plated
L
F H
ØA
ØD
LK
d
R0,6 max 4 x d4 / d5 x t
Material: Housing from steel, all surfaces machined, nickel-plated. Retaining ring for fixing on the spindle end is included.
With quality rolling bearing from Japan. Due to the standard dimensions, these units can also replace parts
of other suppliers.
Ready-to-install housing bearing unit for trapezoidal and ballscrew
spindle drives, for the support side. With one movable single row Spindle reworking (on request) and bearing load data see Page 17.
deep groove ball bearing. With 4 mounting holes. Matching counterpart for fixed side: Flange Bearing FK.
Ordering Details: e.g.: Product No. 642 016 06, Flange Bearing Unit FF 6, Bore 6mm, nickel-plated
16 ®
Shaft Reworking and Bearing Load Data for Spindle Bearing Units BK, EK and FK (Fixed Side)
Shaft Reworking:
At MÄDLER ®, trapezoidal and ballscrew spindles can get reworked,
L7* L7*
fitting to the bearing units. The spindle reworking in the drawing is
just a recommendation. Due to the customer´s request, the length L5 G
ød
could be shorter or longer and the shaft end could get a keyway
DIN 6885.
ød2
øD
Bearing Load Data:
The loading rates and speed limits shown in the table are the limits L6
just for the bearings. The limits of the spindles are much lower,
depending on the diameter, length and material. L5 L4 Wrench flats optional
against surchage
Recommendated Shaft Reworking for Fixed Side Units Bearing Load Data
Bearing- Spindle-Ø D Load rating axial Speed
Unit KGT TR dg6 d2h7 L4±0,2 L5±0,2 G L6±0,2 L71) Bearing dyn.C stat.Co limit
Type mm mm mm mm mm mm mm mm mm Type kN kN min-1
EK 06 / FK 06 8 10* 6 4 28 8 M6x0,75 8 5 706 A P5 2,03 0,80 46.400
EK 08 / FK 08 10/12 12*/14 8 6 32 9 M8x1 10 5,5 708 A P5 3,35 1,45 35.200
BK 10 12/14/15 16 10 8 36 15 M10x1 16 5,5 7000 A P5 5,35 2,60 29.440
EK 10 / FK 10 12/14/15 16 10 8 36 15 M10x1 11 5,5 7000 A P5 5,35 2,60 29.440
BK 12 14/15/16 18 12 10 36 15 M12x1 14 5,5 7001 A P5 5,8 2,89 25.760
EK 12 / FK 12 14/15/16 18 12 10 36 15 M12x1 11 5,5 7001 A P5 5,8 2,89 25.760
BK 15 18/20 20*/24 15 12 40 20 M15x1 12 6 7002 A P5 5,8 3,15 22.080
EK 15 18/20 20*/24 15 12 47 20 M15x1 13 10 7002 A P5 5,8 3,15 22.080
FK 15 18/20 20*/24 15 12 47 20 M15x1 13 10 7002 A P5 5,8 3,15 22.080
BK 17 20/25 24/28 17 15 53 23 M17x1 17 7 7203 A P5 10,1 5,45 18.400
FK 17 20/25 24/28 17 15 59 23 M17x1 17 10 7203 A P5 10,1 5,45 18.400
BK 20 25/28/30 30/36 20 17 53 25 M20x1 15 8 7004 A P5 10,3 6,10 16.560
EK 20 / FK 20 25/28/30 30/36 20 17 62 25 M20x1 17 11 7204 A P5 13,6 7,55 15.640
BK 25 30/32/36 36 25 20 65 30 M25x1,5 18 9 7205 A P5 15,4 9,45 13.800
FK 25 30/32/36 36 25 20 76 30 M25x1,5 20 15 7205 A P5 15,4 9,45 13.800
BK 30 / FK 30 36/40 36*/40 30 25 72 38 M30x1,5 25 9 7206 A P5 21,3 13,6 11.040
BK 35 45 36*/40 35 30 81 45 M35x1,5 28 12 7207 A P5 28,2 18,5 9.660
BK 40 50 50 40 35 93 50 M40x1,5 35 15 7208 A P5 33,5 23,3 8.832
1) The matching distance bushes are included in the scope of delivery of bearing units BK, EK and FK.
Shaft Reworking and Bearing Load Data for Spindle Bearing Units BF, EF and FF (Support Side)
Shaft Reworking:
At MÄDLER ®, trapezoidal and ballscrew spindles can get reworked,
fitting to the bearing units. The spindle reworking in the drawing is øds x m DIN 471
just a recommendation. Due to the customer´s request, the length L8
could be shorter or longer and the shaft end could get a keyway
øD
ød
DIN 6885.
Bearing Load Data:
The loading rates and speed limits shown in the table are the limits L9
just for the bearings. The limits of the spindles are much lower, L8
depending on the diameter, length and material.
Recommendated Shaft Reworking for Support Side Units Bearing Load Data
Bearing- Spindle-Ø D Load rating axial Speed
Unit KGT TR dg6 ds-0,15 L8±0,2 L9±0,2 mH13 DIN 4711) Bearing dyn.C stat.Co limit
Type mm mm mm mm mm mm mm mm Type kN kN min-1
EF 06 / FF 06 8 10* 6 5,7 9 6,8 0,8 6 606-2Z / -2RS 2,3 0,8 37.000
EF 08 10/12 10*/12 6 5,7 9 6,8 0,8 6 606-2Z / -2RS 2,3 0,8 37.000
BF 10 / EF 10 / FF 10 12/14/15 12*/14 8 7,6 10 7,9 0,9 8 608-2Z / -2RS 3,3 1,4 34.000
BF 12 / EF 12 / FF 12 14/15/16 16/18 10 9,6 11 9,15 1,15 10 6000-2Z / -2RS 4,6 2,0 31.000
BF 15 / EF 15 / FF 15 18/20 20*/24 15 14,3 13 10,15 1,15 15 6002-2Z / -2RS 5,6 2,8 23.000
BF 17 / FF 17 20/25 24/28 17 16,2 16 13,15 1,15 17 6203-2Z / -2RS 9,6 4,8 17.000
BF 20 25/28/30 30/36 20 19,0 16 13,15 1,15 20 6004-2Z / -2RS 9,4 5,0 15.000
EF 20 / FF 20 25/28/30 30/36 20 19,0 19 15,35 1,35 20 6204-2Z / -2RS 12,8 6,7 14.000
BF 25 / FF 25 30/32/36 36 25 23,9 20 16,35 1,35 25 6205-2Z / -2RS 14,0 7,9 12.000
BF 30 / FF 30 36/40 36*/40 30 28,6 21 17,75 1,75 30 6206-2Z / -2RS 19,5 11,3 9.500
BF 35 40/45 36/40 35 33 22 18,75 1,75 35 6207-2Z / -2RS 25,7 15,2 8.500
BF 40 50 50 40 38 23 19,95 1,95 40 6208-2Z / -2RS 29,5 18,0 8.000
1)The retaining ring DIN 471 is included in the scope of delivery of bearing units BF, EF and FF.
* A rest of the thread grooves may remain visible.
® 17
Hose clamps DIN 3017-1 (with Worm Gear Drive, Shape A)
10
Band width 9mm. Band thickness 0.6mm.
Type W1, steel zinc plated: With hexagon screw head size
7mm, with cross recess and slot. d
Ø
Type W4, stainless steel: With hexagon screw head size
7mm, with slot.
Other sizes and versions on request. 9
Ordering Details: e.g.: Product No. 638 110 12, Hose clamp DIN 3017-1, W1, 8 - 12mm
Ordering Details: e.g.: Product No. 653 153 00, Washer DIN EN ISO 7089 d1
for M3, steel, zinc-plated
18 ®
Metric Threaded Bars DIN 976-1 Shape A (ex DIN 975), Steel 10.9
Thread M...
Ordering Details: e.g.: Product No. 650 106 00, Threaded Bar DIN 976-1, 10.9, M6, blank
Metric Threaded Bars DIN 976-1 Shape A (ex DIN 975), Stainless
Ordering Details: e.g.: Product No. 650 994 03, Threaded Bar DIN 976-1, V2A, M3 x 1m
* V2A length 1 meter see MAEDLER catalogue or www.maedler.de For Loctite ® thread
locking and bonding
products see
www.maedler.de
® 19
Spring Plungers with moving Ball and Slot, black oxide finished or Stainless Steel, Standard Spring Tension
d2
d1
Material Type Stainless: STAINLESS
Body: Stainless steel. Ball: Stainless steel, hardened.
Bearing: Plastic. Spring: Stainless steel, standard spring tension. l s
Ordering Details: e.g.: Product No. 654 605 00B, Spring Plunger M5
Spring Plungers with moving Ball and Slot, black oxide finished or Stainless Steel, Strong Spring Tension
d2
d1
Note
Product No. Ød1 ±0,04 Ød2 l s Initial End Weight
mm mm mm mm N N g Spring plungers are used for fixation or as
654 997 04B 4 2,0 11 0,5 4,8 6,8 0,6 device to press something in or push it out.
654 997 05B 5 2,5 13 0,7 6,3 10 1,2 Due to the plastic bearing, the ball is
654 997 06B 6 3,5 15 0,95 16 24 2,0
654 997 08B 8 4,5 18 1,4 18,8 31,7 4,3
electrically insulated and the rolling in it
654 997 10B 10 6,5 20 2,3 26 49 7,1 minimizes the wear on the counterpart.
654 997 12B 12 8,5 22 3,1 38 68 11,0
20 ®
Adjusting Rings (Shaft Collars with Set Screw) according to the Old Standard DIN 703, black oxided
Heavy-duty series. With allen set screw made from steel like
DIN EN ISO 4027, but strength 12.9.
From size d 1 =70mm with 2 set screws, with offset 135°.
Blank turned and kalibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
® 21
Miniature Bevel Gearboxes MKU
Miniature angular gear unit for particular high loads and long
service life. Very robust construction, like the larger gearboxes Model K
KU/I. Gear unit size 035 with housing edge length 35mm is
available in ratio i=1:1. The gearbox size 045 with a housing
edge length of 45mm is available in translation i=1:1 to 4:1.
General data: 3 Designs, 6 standard version, and many further
variations available as multi-shaft gearboxes, please enquire.
Also available in corrosion-proof, NO-TOX version for the food
processing and pharmaceutic industry and with grease Version 10 Version 20
lubrication.
Housing: Housing and flanges made of aluminium, fully sealed
against oil leaks and protected against dust. Due to the cube Model L
shape, all 6 sides of the gear box can be used as mounting sur-
faces. The diameters c, l 1 and l 2 are provided for use as align-
ment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular
backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life Version 30 Version 60
with synthetic oil and maintenance free. The gearboxes have no
venting.
Model H
Model K: Input side C: Transmission ratio for gearing down.
Model L: Straight-through output shaft, slowly turning.
Model H: Straight-through output hollow shaft, slowly turning.
22 ®
Miniature Bevel Gearboxes MKU
f2
Model K
e2
h b
r r
p2 i o i
D
Ø d2
c s Version 10
Ø l2
Ø l2
E
Øc
b
B
h
A
e1
f1
Øc
C
Ø d1 s Version 20
p1
Ø l1 Øc
a a
Model L
h b
r r
d2 i o i
D
Ø d2
c s Version 30
Ø l2
E F
b
A B
h
e1
f1
Øc
C
Ø d1 s
p1
Ø l1 Øc Version 60
n n
Model H
h b
r r
i i
D
Ø d3
c s Version 70
Ø l2
Øc
E F
b
h
A B
e1
f1
Øc
C o
Ø d1 s
p1
Ø l1 Øc Version 80
The dimensions of the versions not shown arise by the reflection of the existing dimensions.
Gearbox a b Øcf7 Ød1j6 Ød2j6 Ød3H7 e1 e2 f1 f2 h i Øl1f7
Size mm mm mm mm mm mm mm mm mm mm mm mm mm
035 40 35 35 6 6 6 43 43 59 59 23 M3 22
045 57,5 45 45 10 10 10 53 53 78 78 30,5 M4 32
Gearbox Øl2f7 n o p1 p2 r Øs Feather Key Size at Ød1; Ød2 Feather Key Size at Ød3
Size mm mm mm mm mm mm mm mm mm
035 22 26,5 1,5 15 15 25 29 2 x 10 2 x 53
045 32 34,5 2 23 23 30 39 3 x 18 3 x 69
Permissible Radial and Axial Loads at shaft Ød1 Permissible Radial and Axial Loads at shaft Ød2; Ød3
Gearbox FR in N at Input Speed n1 = min-1 FR in N at Output Speed n2 = min-1
Size 3000 1000 500 250 100 50 3000 1000 500 250 100 50
035 10 20 30 50 70 90 30 50 80 120 150 220
045 80 100 120 150 200 250 100 170 220 300 400 500
The maximum permissible radial forces stated in the table are calculated for the centre of the output shaft end, depending on the
speed. The Axial loads F A can be absorbed, without need for further calculation, up to about 50% of the permissible radial forces.
If the axial load exceeds this value considerably or if combined loads of F R and F A occur – please ask us.
® 23
MÄDLER® - your expert for power transmission elements.
Discover our wide range:
Standard program:
Toothed parts such as gears, racks, bevel gears, pulleys, sprockets. Locking assemblies, lead screws
and nuts, splined shafts and hubs, linear motion, rolling bearings, standard parts, couplings,
gearboxes and geared motors, pneumatic elements, telescopic slides.
Special parts:
Transmission parts according to customer samples or drawings, from single parts to large series
and ready-to-install assemblies - short delivery times, competitive prices and perfect quality.
EN 09/2019