shall overlap in the direction of traffic flow Existing median or shoulder SBGR
fond channel sroll be bolted with 16mm bolt cut to length, Note 4 with wood or steel posts, wooden shown
[
Esreve Tate fw
mm | ers0-sia.0 re tw |
4<22mm dia A490 .6200%21 channel 4950mm in length
Bolts 100mm tong 20mm dia holes on & of chan
in 25mm holes Stor a hot ot om
/ -| | oPsD-912.401
5
Teh
aie
‘Temm bolts edditional holes Temporary concrete barrier
to eccomodate 20mm porary te
dia anchor bolts, Note 1
ELEVATION
20mm dic removable anchor bolts
c200%21 : each with on ultimate pullout value
NOTES: of 100kN in 30MPa_ concrete.
5 onchor bots 1 Additional holes may be field drilled. For Steel Beam Guide Rail detail to be
Notes 2 Flare rate of temporary transition reod in conjunction with OPSD-912.130,
rail and first precast concrete 912.140, or 912.141
barrier unit shall be 16:1 or flatter. When transitioning from a curb section
3 Two anchorage back up r only, onto a lower surface the temporary
4 Where temporary transition rail cannot be concrete barrier shall be supported
connected at post it shall be connected to attain a grade of 10% or flatter.
to existing guide rail between posts C All dimensions are in millimetres
using 6-M22 A230 bolts. unless otherwise shown.
ONTARIO PROVINCIAL STANDARD DRAWING Nov 2002
GUIDE RAIL SYSTEM, STEEL BEAM
TEMPORARY TRANSITION INSTALLATION-RAIL METHOD
SINGLE STEEL BEAM TO TEMPORARY CONCRETE BARRIER| OPSD — 912.330
SECTION A-A