Professional Documents
Culture Documents
Critchley Wire Markers PDF
Critchley Wire Markers PDF
"
# $ %& &
CONTENTS
CABLE IDENTIFICATION 1
1 CABLE MARKERS
Z-Type® 4, 7, 12
K-Type® 5, 7, 12
O-Type™ 5, 8, 12
E-Type™ 5, 8, 13
G-Type™ 5, 9, 13
Applicators 6, 9
V-Type™ 6, 10,
Permark® 316 6, 11
2 LABELLING SYSTEMS
About
Whatever your cable marking requirements, we can provide you
with a suitable product. If you need to identify cables, we are sure
that we can help and give you piece of mind that the cable will be
clearly marked whenever you want to read it.
Z-TYPE® MARKERS
Expanding gusset The Z-Type® marker has may be printed sequentially,
an expanding gusset which numerically or alphabetically,
Wide size range
enables each size of marker and include any combination
Various pack styles to accommodate a wide range of characters and character
to suit your production of cable sizes. The size range height. Special symbols may
requirements allows marking of cables from also be produced. All marks
less than 0.5mm2 to 35mm2. can be packed in the order
Straight or chevron cut
As well as straight cut, chevron of use. For more information
Colour coding option cut markers are available for telephone +44 (0) 1527 540 400.
enables identification interlocking and alignment
SERVICE TEMPERATURE
when mark is obscured of mark. Z-Type® markers are
RANGE:
also available colour coded
Pre-print service also –45˚C to +70˚C.
to BS6746C:1993.
available, contact
MATERIAL: Plasticised PVC.
Tyco Electronics A customised service for
Z-Type® and K-Type® (see MARKS AVAILBLE: A-Z, 0-9,
overleaf) markers is also +, –, /, phase, earth, blank
available. Customised markers and full stop.
4
CABLE MARKERS
K-TYPE® MARKERS 1
Elliptical profile for fitting The K-Type® marker has an conduit or pipe before or
to cables or carrier strips elliptical profile which allows after termination. Marks
a wide cable diameter range can be changed easily.
Large characters for
from 4mm2 to 10mm2 to be
easy reading SERVICE TEMPERATURE
accommodated. An alternative
RANGE: –45˚C to +70˚C.
Colour coding option method of fixing using carrier
enables identification strips and retaining straps MATERIAL: Plasticised PVC.
when mark is obscured in various forms allows the MARKS AVAILABLE:
Pre-print service available, K-Type® marker to be used A-Z, 0-9, +, –,/, phase, earth,
contact Tyco Electronics for marking of outer cable, blank and full stop.
O-TYPE™ MARKERS
Conforms to BS3858: The O-Type™ marker is a thin circumference of the marker.
1992 Type 3 walled plasticised PVC marker
Letters and symbols are
which is particularly suited to
Colour coding enables printed on a pink background.
high density wiring applications
identification when
where space saving is paramount. SERVICE TEMPERATURE
mark is obscured
Nine sizes of marker cover RANGE: –65˚C to +95˚C.
Thin wall for densely cable sizes up to 16mm2. They MATERIAL: Plasticised PVC.
packed wiring are colour coded to BS3858:
MARKS AVAILABLE: A-Z, 0-9,
1992 which includes repeated
+, –,/, phase, earth, blank
printing of the individual digit
and full stop.
three times around the
E-TYPE™ MARKERS
Snap-on marker for E-Type™ markers allow for the allows them to grip the wire and
terminated cables marking of in-situ wiring or remain in place once applied.
cables after termination. Markers The chevron cut ensures legends
Built-in applicator for
are easily and quickly applied remain aligned.
ease of use
using the built-in applicator. The
SERVICE TEMPERATURE
10 sizes cover cable range flared end of the applicator is
RANGE: –40˚C to +125˚C.
from 0.10mm2 to 100mm2 placed on the wire to be marked
and markers are pushed down MATERIAL: High quality copolymer.
European colour coding
option enables identification the applicator on to the wire. MARKS AVAILABLE: A-Z, 0-9,
when mark is obscured The material used to produce +, –,/, phase, earth, blank and
the markers is very elastic which full stop.
G-TYPE™ MARKERS
Zero halogen, UL94 Vo The G-Type™ marker, made chevron cut ensures legends
gusseted marker from a zero halogen, cadmium remain aligned. The markers
free and silicone free, UL94 Vo are available in black on yellow.
Mark permanence to BS3858
material has been specifically
Clause 9.9, DIN VDE 0611 SERVICE TEMPERATURE
developed for use in confined
Part 1 and DIN VDE 0360 Part 1 RANGE: –45 C to +70 C.
areas when human life or electronic
Five sizes cover outside cable components could be at risk. MATERIAL: Modified thermo-
diameters from 1.4 to 12.5mm The products of combustion plastic compound (halogen,
are free from halogens. The silicone and cadmium free).
Expanding gusset for ease
of application gussetted design means each MARKS AVAILABLE:
size will cover a range of cable A-Z, 0-9, +, –,/, phase, earth,
Interlocking for alignment
diameter sizes and the blank and full stop.
of marks
5
CABLE MARKERS
V-TYPE™ MARKERS
Temperature rating from V-Type™ markers are individual Standard V-Type™ markers
–45˚C to +70˚C (-50˚F push-on characters used to are yellow or white with black
to +158˚F). identify wires and small legends and can be supplied
cables permanently. They are as loose pieces packed in
Resistant to sea water,
designed with an expanding boxes, on reels or flat disc
fuels and oils.
profile, enabling each marker reels. Color coded markers
4 sizes covering wire to accommodate a wide range are also available.
diameters from 1.4mm of wire/cable sizes. V-Type™
SERVICE TEMPERATURE
to 16.0mm (0.06 to markers are a simple, cost-
RANGE: –45˚C to +70˚C
0.63 inches) effective solution for many
(–50˚F to +158˚F).
commercial wire identification
applications. MATERIAL: Plasticized
polyvinyl chloride (PPVC).
The markers are supplied
chevron cut and this ensures MARKS AVAILABLE:
the legends remain aligned. A-Z, 0-9, +, –,/, phase, earth,
blank and full stop.
PERMARK® MARKERS
Pre-marked to customer Tyco Permark® 316 stainless SERVICE TEMPERATURE
PER requirements. steel markers are recommended RANGE: 80˚C to +500˚C
MAR
K Customer-defined kits for
for marking in hostile (112˚F to +932˚F).
environments. Using state-
ease of installation. MATERIAL:
of-the-art technology and
Excellent character legibility. no inks, the marking process Stainless Steel
One-piece, 316 stainless produces a permanent, deep PRINTER INFORMATION:
steel construction. surface mark with a darkened
Pre-printed per customer
character in high contrast
Variety of fixing methods. requirements.
to the background. Permark®
Mark will endure the lifetime markers are produced to Permark® Speciality Products
of a Permark® S/S marker. individual customer requirements
Excellent resistance to on a fast turn-around basis
weather extremes and with the flexible and easy-to-
high levels of UV light. use Permark® software that
allows electronic or manual
Resistant to corrosive
data entry. Completed markers
marine and industrial
are supplied in customer
atmospheres.
defined kits for ease of
Excellent resistance to a installation. We recommend
variety of hydrocarbons, installation with 316
organic chemicals, acids, stainless steel cable ties.
alkalis and inorganic
salts. For resistance to a
specific chemical, contact
your local Tyco representative.
6
CABLE MARKERS
COLOUR OPTIONS (STRAIGHT CUT) COLOUR OPTIONS (CHEVRON CUT) MATERIAL PPVC.
White body marked black: A-Z, 0-9 White body marked black: A-Z, SERVICE TEMPERATURE RANGE
and symbols, available on reels 0-9 and symbols, available in –45˚C to +70˚C.
(R) in boxes (A) and on pancake boxes (A) only.
CHEMICAL RESISTANCE
reels (PR). Yellow body marked black: A-Z,
Excellent: Aircraft Fuel, Propan-
Yellow body marked black: A-Z, 0-9 0-9 and symbols, available on
2-ol, 1,1,1 Trichloroethane, Kilfrost
and symbols, available on reels (R) only. reels (R) only.
Silicone Hydraulic Fluid Poor:
Colour coded: 0-9 all sizes, available Colour coded: 0-9, size 11 only,
Aeroshell (4), Sullage Fluid,
in boxes (A). 0-9 box pack (100 available in boxes (A) or on reels (R).
Gas Turbine Oil 98. Poor:
off each number) also available.
Skydrol 500 B4
K-TYPE® MARKERS
For Cable For Cable size• Marker Marker Packed (R) Order code
dia mm mm2 (BS6004) (BS6231) size length mm Reel
7
CABLE MARKERS
E-TYPE™ MARKERS
For Cable For Cable size• Marker Applicator Order code
dia mm mm2 (BS6004) (BS6231) size Colour Packed
8
CABLE MARKERS
G-TYPE™ MARKERS
For Cable For Cable size• Marker Packed Order code
1
dia mm mm2 (BS6004) (BS6231) size Box (A)
1 20 7 1 1251
2 25 9 1 1252
3 30 11 1 1253
4 40 13 1 1254
5 – 15 1 1255
6 55 18 1 1256
9
CABLE MARKERS
V-TYPE™ MARKERS
For Cable Marker Packed Order code
dia mm (inches) size Box
Order example: 07611400 (V-Type™ markers size 3, yellow marker with black legend “0”, boxed packaging)
10
CABLE MARKERS
PERMARK® MARKERS
PER Available sizes and formats
MAR Ordering description Product description Size (L x H) Printable area (L x H)
K mm inches mm inches
PM09512-<# text lines>-<font height>-<# characters> Pre-marked 316 S/S marker 95 x 12 3.74 x 0.47 55 x 10 2.16 x 0.40
Options
Part numbering system: Fonts Various available
PM 0 75 07–1–4–5 Lines per marker One, two or three (Determined by selected font height. Minimum 1 mm / 0.04" spacing between lines.)
Characters/spaces per line Saddle fixings 13 mm L x 2.4 mm H (0.51" L x 0.09" H)
Font height (mm) Hole fixings 7 mm (0.28")
Number of text lines
Standard colours Metallic
Tag height (mm)
Tag kength (mm) Font heights Characters per line
Filler character Standard Condensed
Permark® 2.5 mm (0.10") 30 N/A
3.0 mm (0.12") 25 N/A
4.0 mm (0.16") 20 30
5.0 mm (0.20") 15 25
6.0 mm (0.24") 15 25
8.0 mm (0.31") 10 20
10.0 mm (0.40") 10 15
PM07507-1-<font height>-<# characters> Pre-marked 316 S/S marker 75 x 7 2.95 x 0.28 50 x 5 1.6 x 0.20
Options
Fonts Various available
Lines per marker One only
Saddle fixings 9.5 mm L x 2.4 mm H (0.37" L x 0.09" H)
Hole fixings None
Standard colours Metallic
11
CABLE MARKERS
2
Cable size* mm 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25 35 50 70
11
13
15
18
23
35
K-TYPE® MARKERS
Cable diameter
mm 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0
Cable size* mm2 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25 35 50 70
65
Cable size* mm2 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25 35 50 70
0.75
10
12
15
20
25
30
40
55
12
CABLE MARKERS
E-TYPE™ MARKERS
Cable diameter
1
mm 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0
Cable size* mm2 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25 35 50 70 95
12
15
17
21
24
G-TYPE™ MARKERS
Cable diameter
mm 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0
2
Cable size* mm 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25 35 50 70
G3/10
G3/20
G4/10
G6/10
G6/20
13
LABELLING SYSTEMS
14
LABELLING SYSTEMS
90 90 TKM-50
60 60 TKM-60
30 30 TKM-150
30 30 TKM-230
CARRIER STRIP
15
p r o d u c t d a t a
Computerised Multi-Mark
Protected by a clear PVC carrier that slides onto the
cable, Multi-Mark is ideal for post-termination identification
or when re-labelling is required.
i d e n t i f i c a t i o n s o l u t i o n s
Computerised Multi-Mark
Legend
MARKER MARKER PACK PAGES ORDER
LENGTH COLOUR HEIGHT QUANTITY PER PACK CODE
mm mm
Carriers
FOR CABLE FOR CABLE CARRIER CARRIER CAPACITY PACK ORDER
DIAMETER mm SIZE mm2 SIZE LENGTH mm (DIGITS) QUANTITY CODE
Multi-Mark Legend
MATERIAL CHEMICAL RESISTANCE APPROVALS/STANDARDS
Polyolefin Resistant to common Mark Permanence:
STANDARD COLOURS fluids, lubricants and MIL-M-81531
solvents BS 3G 198 Part 3
White and yellow
Multi-Mark Carriers
MATERIAL SERVICE TEMPERATURE
Clear PVC -45ºC to + 70ºC
‘Critchley’, ‘HSI’, ‘Cable Label’, ‘Panel Label’ and ‘LFH’ are Trademarks of Critchley Limited, United Kingdom. ‘Multi-Mark’ is a Trademark of Critchely Electrical Products Pty. Ltd., Australia.
2274/A
The information on this data sheet is believed to be correct at the time of going to print. Specifications given in this publication are subject to change without notice. © copyright 1997, Critchley Limited. EXECUTIVE PRESS – 4/98
Critchley Electrical Products Pty Ltd 101 Deakin Street Silverwater NSW 2128 Australia
Telephone 61 (0) 2 9648 5033 Fax 61 (0) 2 9647 1652
! "
# $ %& &