You are on page 1of 2

National University of Civil Engineering

BRIDGE & TUNNEL DIVISION

61CDE Bridge Management, Mainternance and 2020.Sp


Mornitoring (120455)
(2020.04.23)
Time: 90 min.

Problem 1:
Which aspects should be inspected for the concrete superstructures ?
Problem 2:
What is spalling ? What are the main reasons which cause spalling in concrete structure ?
Problem 3:
Calculate the maximum moment in a 12m simply supported beam due to the following axle loads:
Problem 4:
Rating the concrete slab bridge at midspan for moment.

Table 1. Table of Parameter


Name B L H S3 No. Name B L H S3
No.
(mm) (mm) (mm) (mm) (mm) (mm)
1 Nguyễn Việt Anh 2500 6000 275 ϕ16 13 Phạm Đăng Hoàng 3000 11000 600 Φ25
2 Hồ Huy Cảnh 2500 7000 345 ϕ16 14 Bùi Sĩ Hùng 3000 12000 650 Φ25
3 Dương Thế Cường 2500 8000 395 ϕ18 15 Lưu Quang Huy 3000 13000 650 Φ25
4 Lê Văn Duẩn 2500 9000 475 Φ20 16 Tăng Bá Huy 3500 6000 380 ϕ18
5 Vũ Trọng Duy 2500 10000 500 Φ20 17 Đỗ Đức Lộc 3500 7000 425 Φ20
6 Vũ Hải Đăng 2500 11000 550 Φ22 18 Phạm Duy Lương 3500 8000 450 Φ22
7 Đinh Văn Đồng 2500 12000 600 Φ22 19 Lê Nhật Nam 3500 9000 500 Φ22
8 Bùi Trần Thanh Đức 3000 6000 360 ϕ18 20 Nguyễn Hoàng Nam 3500 10000 600 Φ25
9 Mai Anh Đức 3000 7000 400 Φ20 21 Nguyễn Kim Ngân 3500 11000 650 Φ25
10 Nguyễn Minh Đức 3000 8000 450 ϕ20 22 Nguyễn Văn Tuấn 3500 12000 700 Φ25
11 Phan Công Đức 3000 9000 500 Φ22 23 Trần Đức Anh Tuấn 3500 13000 700 Φ25
12 Nguyễn Tiến Hiệp 3000 10000 550 Φ22 24

S3 @ 150 mm

You might also like