Professional Documents
Culture Documents
* Copper Stripes - When the key is inserted, it's copper bars attached to it will
be connected to certain copper stripes depending to its position to the key which
serves as its code.
.The copper stripes then send signals to the arduino with certain
signal patterns.
* LDR's - Same as the copper stripes, when the key is inserted it also produces
different colors of light
which absorbs to the LDR's and the LDR's send signals to the arduino with
different values of light that serves as it's security code.
* Servo - When the circuit starts due to the insertion of the key, the servo with
the copper stripes attached to it rotates to make the copper stripes and copper
bars on the key attached.
When that happens, it can now send certain signals to the arduino.
* 5v Relay - When the auto start mechanism is triggered. The relays will switched
on and gives a bridge from battery to the entire parts of the circuit.
So its major fucntion to the circuit is a switch.
* Auto-start mechanism - Auto-start mechanism is made of two copper bars with small
distance away from each other. When the key
is inserted, the two copper bars attached and gives a bridge to
deliver electricity to power up the circuit.
It functions as the main switch of the circuit.