Professional Documents
Culture Documents
Readme lOGIXPRO
Readme lOGIXPRO
For those unfamiliar with RSLogix, I've included a program file for the
Silo Simulation to get you started. When you have LogixPro running
select the Silo Simulation, then click Load in the File Menu and select
the file "silo.rsl". Once it is loaded and you can see it, you can then
"DownLoad" it to the PLC. At this point you can place the PLC into the
"RUN" mode. If all goes well, just clicking on the simulations START
pushbutton should get the whole process going. We don't support online
editing, so remember to place the PLC in the "PGM" mode to edit and
then "Download" to the PLC before attempting to "RUN" again.
Please let us know about any problems you encounter and pass along
your impression of the program as a training tool. With your help, we
intend to make LogixPro the standard tool of choice for PLC simulator
training.
Best Regards,
Professor Bill