Industrial Ammonia Refrigeration Plant Contact Information
Original Bitzer Australia offers a wide range of single & multiple compressor packages to suit Bitzer Australia 134 Dunheved Circuit, manufactured equipment both medium & low temperature applications, all packages come with factory wired St Marys, NSW 2760 electrical option. Australia Features Include: tel +61 (2) 8801 9300 fax +61 (2) 9673 4698 • Capacities MT: 60kW - 900kW @ -10˚C SST 32˚C SCT info@bitzer.com.au • Capacities LT: 30kW - 348kW @ -32˚C SST 32˚C SCT • Dual capacity control with infinite or 4 stage capacity Victoria control (on 85 series only) tel +61 (3) 8326 8200 • Effective load profile matching & greater efficiencies at low fax +61 (3) 9310 2520 load conditions compared to large single screws Queensland • High efficiency rotor profile with further developed tel +61 (7) 3274 3620 geometry fax +61 (7) 3274 3621 Plate Heat Exchangers • Robust tandem axial bearings with counter bearings • Automatic start unloading South Australia High heat transfer capacity tel +61 (8) 8268 4500 Low charge • High quality shaft seal with metal bellows Low fouling tendency • Coaleser oil separators fax +61 (8) 8268 4555 High corrosion resistance Easy maintenance • Water or thermosyphon oil cooling Western Australia • Local IP54 rated Stand alone electrical panel tel +61 (8) 9359 2066 • Allen Bradley PLC for local compressor control fax +61 (8) 9359 2077 Ethernet & MODBUS network capability
Combination of approved Auckland New Zealand HS technology with the tel +64 (9) 9415 2030 innovative features of the fax +64 (9) 9415 2031 CHS series Optimized parallel compounding with space The Bitzer range of open drive reciprocating compressor packages offer a cost effective saving arrangement of all Bitzer Refrigeration Asia Limited connections on one side, & energy efficient solution for many commercial & light industrial refrigeration 200 Cantonment Road #06-02A, Slide valve control for infinite applications. Southpoint, Singapore 089763 or stepped capacity control. tel +65 6220 4942 Suitable for R134a, R404A, • High efficiency oil separator fax +65 6220 4794 R507A, R407C & R22 Distributed By: • Trax oil & solenoid valve fitted for systems@bitzer.com.sg oil return www.bitzer.com.sg • Capacity control options include cylinder head loading/unloading Bitzer India Private Ltd (33%-66%-100%) or VSD 618, 6th Floor Nirmal Lifestyle BITZER Quality Packaged Equipment • Fully wired electrical option Corporate Office Building • Oil pressure, discharge temperature, L.B.S. Marg., Mulund (West) HP/LP safeties as standard Mumbai 400 080 Maharashtra, India • Water cooled cylinder heads fitted tel +91 222 567 6006-9 Quality as standard In the interest of continuous improvement BITZER reserves the right to ISO 9001 fax +91 222 567 6011 change the specifications or design of any of its products without notice. The BITZER Symbol, name Bitzer Group of Companies and model names are registered trade marks. All products manufactured are pending design and specification registration and must not be copied or www.bitzer.com.au duplicated in any way. www.buffalotrident.com B ITZER G ROUP O F C OMPANIES 5 ISSUE: MAY 2009 NH3 SERIESs 6pp.:Layout 1 20/5/09 7:31 AM Page 2
Industrial Ammonia Refrigeration Systems R717 Chiller Packages LEVEL CONTROL
Accumulator level is measured by a highly Bitzer Australia’s R717 chiller packages are designed Features include: As the consumption of HCFC refrigerants in Australia is gradually phased out by to operate with a variety of secondary refrigerants such accurate pressure differential sensor, which • Fully factory assembled pressure tested packages, as CO2, Glycol & water & can provide cooling both provides a scaled analogue input to the PLC, this 2016, four years before Australia’s Montreal Protocol obligations, end users & complete with compressors, Plate Heat Exchanges above & below 00C. & pre wired with factory mounted electrical control in turn drives a Danfoss ICM modulating valve contactors need reliable, environmentally friendly & high efficiency alternatives in which ensures accurate trouble free level control This makes them ideal for the replacement of R22 panel. order to meet the demand to replace HCFC refrigerants in particular R22 refrigeration & also ensures the chillers can operate on a HVAC chillers & for medium temperature process • Bitzer R717 packages ensure reduced on site labour & air conditioning plant & equipment. applications as they offer; time & installation cost minimal charge. Coupled with this, HFC’s are coming under Increased scrutiny due to the increased • High energy efficiency with higher COP’s when • 100kW - 612kW @-11˚C SST 35˚C SCT environmental awareness of their negative impact on global warming (high GWP’s) & compared to other alternatives 200kW - 1280kW @ 7˚C SST 35˚C SCT their future carbon tax potential, this has lead to renewed interest in ammonia, as • Low environmental impact • BITZER R717 chillers operate on a critical charge, ammonia is a high efficiency refrigerant that is environmentally benign with zero ozone • Zero exposure to future Carbon Pollution Reduction minimizing the amount of ammonia required depletion potential (ODP)& zero global warming potential (GWP). Scheme (CPRS) • All vessels built to Australian Standard AS -1210 Bitzer Australia’s new range of ammonia equipment is designed to meet the • Flexible design options ELECTRICAL • Fully enclosed panel option available challenges facing the food processing, food distribution & the HVAC sectors as they Packages Come Pre Wired With Factory Mounted Electrical Control Panel offer a cost effective & environmentally friendly alternative to HFC refrigerants for low temperature, medium temperature & HVAC applications. • Allen Bradley PLC Complete With HMI Operating With Bitzer Open Protocol Control Logic • Ethernet & Modbus Capability With Remote Access Via Internet • VSD Fitted To Lead Compressor For Enhanced Load Profile Matching & Greater Efficiency OSKA Compressors At Low Load Conditions • R717 Detector With Shunt Trip Fitted As Standard
At the heart of the Bitzer R717 Chiller Packages are Bitzer OS 53, 74 & 85 Series
Ammonia Flooded Drum Evaporators
compressors. The OS screw compressors set the worldwide standard for technical innovation, versatility & efficiency.
A VSD fitted to the lead compressor ensures enhanced load
profile matching & greater BITZER Australia now offers fully integrated R717 flooded drum evaporator packages for a efficiency at low load Conditions variety of refrigeration applications including: Heat Reclaim CO2 Cascade High Side applications for the total NATURAL REFRIGERATION SOLUTION Bitzer R717 Chillers packages come Cooling of Secondary Refrigerants for the FOOD PROCESSING & WINE INDUSTRIES with the option of De-superheater & additional oil cooler to maximize heat recovery for water heating Features Include:
• All Vessels built to Australian Standard
AS-1210 • Fully Integrated Package using Danfoss Plate Heat Exchanges Control & Isolation Valves Bitzer R717 Chillers utilize Thermowave Plate Features Include • Thermowave-welded Plate & Frame Heat Features Include Heat Exchanges for both secondary refrigerant & Exchangers oil cooling High heat transfer capacity • Thermal Insulation with metal clad finish • High efficiency rotor profile Founded in Germany in 1992 Thermowave are Low charge • Efficient capacity control Low fouling tendency • Electronic Level Control and Monitoring committed to develop & manufacture a new • Econimiser operation generation of Plate Heat Exchanger which offer a High corrosion resistance • Generously dimensioned bearings balanced price performance ratio along a wide Easy maintenance • High quality shaft seal with range of applications metal bellows